RE: DNS Errors causing Active Directory to Crash

Tech-Archive recommends: Fix windows errors by optimizing your registry



I have also tried this and they problem still happens

"Anthony" wrote:

> Try manually specify the IP for the DNS server to listen on. In DNS Manager,
> right click the servfer and choose properties. On the genral tab it probably
> says "all assigned" for the IP. Change it to the IP of the internal
> interface. Restart DNS service
> --
> Anthony
> http://truetechsolutions.supersize.org
>
>
>
> "Luca" wrote:
>
> > no thats the weird thing, i cant find anything anywhere that has 0.0.0.0
> > assigned to anything
> >
> > "Antknee" wrote:
> >
> > > The last error gives a clue. Is 0.0.0.0 assigned to any interfaces on this
> > > server?
> > > In DNS manager go to the general tab and specify with IP to listen on, then
> > > restart DC.
> > >
> > > "Luca" wrote:
> > >
> > > > We have been having some DNS issues on a few of our servers which i believe
> > > > are causing Active Directory to crash. When trying to access active
> > > > directory user and computers, domains and trusts, we sometimes get the erroe
> > > > "the server is not operational" Usually a reboot fixes the problem but this
> > > > is not always the easy to do as we have clients accessing the servers 24
> > > > hours a day.
> > > >
> > > > Upon examination of the DNS logs there are numerous errors such as:
> > > >
> > > > Event ID 4015:
> > > > The DNS server has encountered a critical error from the Active Directory.
> > > > Check that the Active Directory is functioning properly. The extended error
> > > > debug information (which may be empty) is "". The event data contains the
> > > > error.
> > > >
> > > > Event ID 9999
> > > > The DNS server has encountered numerous run-time events. To determine the
> > > > initial cause of these run-time events, examine the DNS server event log
> > > > entries that preceded these run-time events. The data is the number of events
> > > > that have been suppressed in the last 60 minute interval.
> > > >
> > > > Event ID 404
> > > > The DNS server could not bind a Transmission Control Protocol (TCP) socket
> > > > to address 0.0.0.0. The event data is the error code. An IP address of
> > > > 0.0.0.0 can indicate a valid "any address" configuration in which all
> > > > configured IP addresses on the computer are available for use.
> > > > Restart the DNS server or reboot the computer.
> > > >
> > > > EVent ID 408
> > > > The DNS server could not open socket for address 0.0.0.0.
> > > > Verify that this is a valid IP address for the server computer. If it is
> > > > NOT valid use the Interfaces dialog under Server Properties in the DNS
> > > > Manager to remove it from the list of IP interfaces. Then stop and restart
> > > > the DNS server. (If this was the only IP interface on this machine and the
> > > > DNS server may not have started as a result of this error. In that case
> > > > remove the DNS\Parmeters\ ListenAddress value in the services section of the
> > > > registry and restart.)
> > > >
> > > > If this is a valid IP address for this machine, make sure that no other
> > > > application (e.g. another DNS server) is running that would attempt to use
> > > > the DNS port.
> > > >
> > > >
> > > > There are hundreds of these errors all through the error log, Our DNS has
> > > > seemed to work well for quite a long time, there have been no major changes
> > > > to the system that would be causing these errors.
> > > >
> > > > All servers are windows 2003
> > > >
> > > > any one got any suggestions?
.



Relevant Pages

  • Re: GPOs dont apply on desktops and laptops at a remote site with
    ... Anthony, http://www.airdesk.co.uk ... I, at last, tried turning slow link detection and that fixed it. ... MTU's over VPN: can you connect to remote management over the VPN, ... i have checked DNS and it has all the SRV records in the right ...
    (microsoft.public.windows.server.active_directory)
  • Re: Source: DnsApi Event ID: 11150 - Help!
    ... Thank you Anthony. ... It does not make much sense for a server to ... it only the DC DNS server address; and have the LAN DNS server forward to ... You can manually retry registration of the network adapter and its ...
    (microsoft.public.windows.server.dns)
  • Re: Source: DnsApi Event ID: 11150 - Help!
    ... it only the DC DNS server address; and have the LAN DNS server forward to ... Anthony, http://www.airdesk.co.uk ... The system failed to register network adapter with settings: ...
    (microsoft.public.windows.server.dns)
  • Re: GPOs dont apply on desktops and laptops at a remote site with
    ... Anthony, http://www.airdesk.co.uk ... Are the clients using only your internal DNS servers as their Preferred ... which links back to the head office via a VPN ... I read in the following article that there is slow link detection ...
    (microsoft.public.windows.server.active_directory)
  • DNS - wierd problem
    ... I am having a wierd problem with DNS in Windows XP Pro SP1. ... my network card to use DHCP and get the DNS server addresses ... If I manually specify the DNS ...
    (microsoft.public.windowsxp.network_web)