Re: Can't find QAM Channels

Tech-Archive recommends: Fix windows errors by optimizing your registry

Last I heard no.
"SoCalCommie" <nospam@xxxxxxxxxxx> wrote in message news:H8xXk.9791$ZP4.4540@xxxxxxxxxxxxxxxxxxxxxxx
"JW" <JW@xxxxxxxxxxxx> wrote in message news:D1FBB4EB-8B3B-4778-A038-CFEB99908414@xxxxxxxxxxxxxxxx
The MC TV pack 2008 does support clear QAM and this support will also be in Windows7
"SoCalCommie" <nospam@xxxxxxxxxxx> wrote in message news:UJbXk.5703$hc1.3492@xxxxxxxxxxxxxxxxxxxxxxx
"Manta2005" <Manta2005@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:CFDC5C2B-DFF7-48FD-9C9C-FEF76B17AA91@xxxxxxxxxxxxxxxx
Hello,

I have VMC with 3 tuners and TV Pack 2008 installed:

Tuner 1 - WinTV 1600
Tuner 2 - WinTV 1800
Tuner 3 - ATI Digital CableCard

When setting up the TV signal, VMC only identify the following tuners even
though the feed to both tuners contains also ClearQAM:

1 x Digital Cable (CableCard)
2 x Analog Tuners
2 x ATSC Tuners

To verify the ClearQAM, I installed HDHomeRun tuner and VMC recognized the
following tuners:

1 x Digital Cable (CableCard)
2 x Analog Tuners
2 x ATSC Tuners
1 x QAM Tuner

I verified the Hauppauge tuners are using the latest drivers (downloaded
from Hauppauge since the drivers in WindowsUpdate are outdated).

I was hoping someone could shed some light on this.

Thanks,

Media Center does not support ClearQAM. Never has. Probably never will.

--
SoCalCommie
http://so-la-i.com/

George W Bush, WORST pRESIDENT EVER!!!



I didn't know that. Thanks for the info. Any hope for support in MCE2005?



.

Relevant Pages

  • RE: 2 Tuners... Can they be used???
    ... VMC can support 2 tuners, I believe it will actually support up to 4 tuners. ... I believe the error message you are receiving is do to the fact your set top ... Watch one channel while recording a different channel with VMC. ...
    (microsoft.public.windows.mediacenter)
  • Re: 2 Tuners... Can they be used???
    ... two STBs coax or S-Video or two coax cable connectors. ... Watch one channel while recording a different channel with VMC. ... when I let VMC check the tuners automatically this is the message ...
    (microsoft.public.windows.mediacenter)
  • Re: Cant find QAM Channels
    ... The MC TV pack 2008 does support clear QAM and this support will also be in Windows7 ... When setting up the TV signal, VMC only identify the following tuners even ...
    (microsoft.public.windows.mediacenter)
  • Re: Cant find QAM Channels
    ... Tuner 1 - WinTV 1600 ... When setting up the TV signal, VMC only identify the following tuners ...
    (microsoft.public.windows.mediacenter)