Re: MCX disconnects after 30 minutes

Hello Barb and Gene,

Looks like the suspect is in the route not MCE, MCX or other software. I
will take that path and invest in a crossover cable this weekend and see if
PnP yield the result we are looking for. Still puzzle me why the timeout is
so regular ie. MCE shell exit 30 minutes after MCX connection. Just wondering
if there is any suspects on that front. Again Thanks!

"CP" wrote:

My understanding to connect the DMA2100 directly with the MC PC without
routers/switches would require crossover cables which I do not have. I did
tried a normal CAT5 cable which does not work. Let me know if I am wrong or
how I can set that up to test and verify.
On AV software, I had only the basic factory installation like HP DVD
Player, Cyberlink DVD suite, WMP and InterVideo but none of these are running
during my test to connect the MC PC to DMA2100. I have also stopped all other
background software, firewalls and UAC (by system of elimination) in the hope
to find out if there are conflicts.
Also I am on Vista Home Premium and not XP. Do not know if that have any
impact.
On the term load balance, this may be misleading as there is a possibility
(not now) that I may require heavy internet usage (data transfers) in my home
office while video streams are going on in another room. Since I upgraded my
WRT54G to WRT300N I decided to continue with the WRT54G.
Thanks for continue looking into my issue. Truly hope you can help me and
really appreciate.


"Barb Bowman" wrote:

109 usually means the MCE shell exited unexpectedly. 113 is just
"session established successfully"

can you connect the DMA2100 directly to the MCE PC with Ethernet,
bypassing all switches, routers, access point and see if you have
issues?

what AV software do you have? what else is running on the PC at the
time?

You spoke earlier about having the balance the load and the need for
two routers. I can't see any kind of load here with what you listed.
But direct connecting the extender to the PC will rule out all of
those conflicts.

On Thu, 18 Sep 2008 06:14:01 -0700, CP
<CP@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Took a relook on the network it should be:

Modem
|
WRT300N (Gateway/DHCP) ----- Notebook PC (LAN)
| Wifi (WPA2)
+------Switch -------------------- WRT54G ---------------- Wifi (WPA2)
| HP Media PC
| AiO Printer/Fax/Scan
| Hava (Future)
+------ AP (WPA2)

I took the WRT54G off the network and still 30 minute connection timeout
occurs.

Thanks Again.

"CP" wrote:

Hello Barb,

First off I took the second router WRT54G out of the network (one router
network) and still the 30 minute timeout exist. Now on your question, here is
how I setup my network

modem
|
WRT300N (Gateway/DHCP) --- Notebook Work PC (LAN)
| Wifi (WPA2)
|
+------------- WRT54G -- Switch --- HP Media PC
| | DMA2100
| | AiO Printer/Fax/Scan
| | Hava (PVR) (Future)
| +Wifi (WPA2)
|
+------------- AP (WPA2)

I would have 2 or more adhoc notebooks accessing my network via Wifi. Again
Thanks for looking into my issue.

"Barb Bowman" wrote:

not sure what you mean by balancing the load. how many computers do
you have on this network? can you post info on what is connected to
what like

modem
|
wrt300N
|
?
|
xxxxx xxxxx xxxxx

On Tue, 16 Sep 2008 17:19:01 -0700, CP
<CP@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Hello Barb,

I have not tried removing one router. Will do that to check and reply. The
WRT300N is the DHCP/Gateway/Router. This is my edge device. The WRT54G is
just a router to balance the load. Its hooked to my MC PC via switches. Would
this impact the MCE. I am having expansion plan for a Voice Gateway soon.
Thanks so much for getting back.

Regards, cP

"Barb Bowman" wrote:

you have two routers ? that certainly complicates this. does this
happen if you remove one router from the picture? how are these
connected to your broadband modem? which is the edge device? is the
WRT300N connected to the modem? is the WRT54G configures as an
access point and not as a router handing out DHCP addresses?

On Tue, 16 Sep 2008 04:54:03 -0700, CP
<CP@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Hi Everyone,

I am currently faced with a situation where the Media PC disconnects my
extender in about 30 minutes. I connect both Media PC and extender (DMA2100)
wired (Cat 5) to the routers (WRT300N and WRT54G). All connections and
bandwidth works fine and at maximum stable performance. Event Viewer indicate
ID 109 about 30 minutes everytime about ID 113. System Log does not have
events that associate to Media Event. I have tried the following still
connection fails in 30 minutes.
- Turn-off Firewall
- Turn-off UAC
- Set no-sleep, no-hibenate for PC, network card.
- Reboot PC, Routers, switches
- Re-install MCX
This seems to be experience by other users regardless of extenders. I guess
it is a much awaited solution by many. Thanks truly for your help.

Regards,
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
http://digitalmediaphile.wordpress.com

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
http://digitalmediaphile.wordpress.com

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
http://digitalmediaphile.wordpress.com

.

Relevant Pages

  • Re: Using Remote Desktop From an SBS Domain
    ... After I thought about needing 3389 forwarded on my router to allow me to ... Remote Desktop "out" from a workstation on my SBS network to a host XP ... Hopefully next week I can attempt a connection while my ISP watches the ...
    (microsoft.public.windows.server.sbs)
  • Re: Connection from remote computer to network SQL Server
    ... There is no firewall on the W2K machine acting as the SQL server. ... I tried making the SQL machine a "trusted" on the router. ... connection works. ... To find the IP address of your computer inside the network, ...
    (microsoft.public.access.adp.sqlserver)
  • Re: Unable to obtain a server- assigned IP address Try again later or enter an IP address in Net
    ... I can go to Control Panel - Network and Internet Connections - ... If yours is not a subset of your router, ... I have a LINKSYS router (4 port connection) - I have my cable modem ...
    (microsoft.public.pocketpc)
  • Re: Connection from remote computer to network SQL Server
    ... There is no firewall on the W2K machine acting as the SQL server. ... I tried making the SQL machine a "trusted" on the router. ... connection works. ... To find the IP address of your computer inside the network, ...
    (microsoft.public.access.adp.sqlserver)
  • Re: Loss of Connectivity on Only One PC on a LAN
    ... When you ran the Network Setup Wizard, ... The original setup of the LAN was done entirely by the user of the other PC on that LAN in July. ... I use a LAN connection which consists of two PCs each connected to a Linksys BEFSR 41 Router. ...
    (microsoft.public.windowsxp.network_web)
Loading