Re: Does not Detect Cable
- From: "Curious" <spammenot@xxxxxxxxxxxxx>
- Date: Thu, 26 Jun 2008 07:19:07 -0700
Do these problems also occur when trying to play a DVD?
What resolution is your external monitor and how is it connected VGA, S-video?
What are your laptop and external monitor resolution settings?
"Aharah" <Aharah@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:2CCA6431-785D-42D9-A601-446C33788168@xxxxxxxxxxxxxxxx
It will not play video when my external monitor is plugged in, even on my
'main' monitor and it fails completely when dragged over to my external
"Curious" wrote:
Your avermedia software does not play WHAT nicely when you have your
external WHAT plugged in?
"Aharah" <Aharah@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7CFC9D31-2B82-4700-8115-6076CF927A6F@xxxxxxxxxxxxxxxx
> It does work in the AVer software, wholly and completely (save not > having
> OTA
> because I live in a valley), but it does not work in WMC. The only > reason
> I
> care is that the AVer software does not play nicely when I have my
> external
> plugged in and WMC does.
>
> "jolt" wrote:
>
>> Your tuner does not have hardware MPEG 2 and requires a software >> encoder
>> for analog tuning. If you have a mess of different codec on your >> system
>> that
>> may have something to do with your analog encoding not functioning
>> properly.
>> At the very least the analog tuner should work in Avermedia software, >> if
>> it
>> doesn't then you may need to remove existing codec packs and reinstall
>> the
>> avermedia software to get the encoder working.
>>
>>
>>
>> "Aharah" <Aharah@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:91C3140D-29FD-422E-A530-96F96EEB1B0D@xxxxxxxxxxxxxxxx
>> > Hello, I know this has been asked a dozen times before so I will >> > point
>> > out
>> > the following:
>> >
>> > My driver is up to date, I do have an MPEG-1/2/4 support for analog >> > and
>> > 2
>> > for digital, and I have every codec known to man, I use CCCP.
>> >
>> > I am running a Toshiba Satlite U305-s107, dual core, Vista Home
>> > Premium,
>> > two
>> > gigs of ram, and my tuner card is AVer Media- AverTV Hubrid >> > NanoExpress
>> > (HC82
>> > ATSC).
>> >
>> > So, it says that I only have an antenna signal, but all I have is a
>> > cable
>> > plugged in. I have spent the past two hours messing around with WMC
>> > trying
>> > to
>> > get it to understand that I want it to go cable and it refuses to
>> > detect
>> > the
>> > cable connection. Any help would be greatly appreciated, you can >> > have
>> > the
>> > digital last piece of my birthday cake if you can figure out why it >> > is
>> > wonky!
>> > ^_^ Thanks in advance!
>>
>>
>>
.
- References:
- Re: Does not Detect Cable
- From: jolt
- Re: Does not Detect Cable
- From: Curious
- Re: Does not Detect Cable
- From: Aharah
- Re: Does not Detect Cable
- Prev by Date: mark fax as read
- Next by Date: Re: re-installing
- Previous by thread: Re: Does not Detect Cable
- Next by thread: Re: Does not Detect Cable
- Index(es):
Relevant Pages
|
