RE: How to set up TV signal when output channel is 73
- From: James <James@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 9 May 2008 18:50:01 -0700
Here's the steps I took to get Microsoft Media Center to display channel 73.
1. I selected to manually configure my TV signal.
2. I selected the CABLE as the input.
3. I answered NO to the question if I had a set-top box.
4. I selected two tuners (for my case), you may only have one tuner card on
your PC.
5. Then I selected "Return to TV settings"
6. I selected live TV, then changed the PC channel manually using the Plus
key until I got to channel 73.
"Marina G" wrote:
I have MCE 2004. I live in Canada and have Bell satellite TV. The output.
channel is currently 73 but can range from 21-125. I cannot set it to 2, 3,
4.
When I try to set up the TV signal using either the Satellite or Cable
options, I can set to channel 2,3,4, S-vid 1,2, or Comp 1,2. None of these
receive my signal (I have tested the coaxial cable by hooking up a TV).
How do I get MCE to see the signal?
Marina
- Follow-Ups:
- Re: How to set up TV signal when output channel is 73
- From: Jason Tsang
- Re: How to set up TV signal when output channel is 73
- Prev by Date: Re: Dual Stream Videos
- Next by Date: DishNetwork TV2 Channel Setup
- Previous by thread: error message
- Next by thread: Re: How to set up TV signal when output channel is 73
- Index(es):
Relevant Pages
|
