Re: Media center and Xbox 360 Wireless to wired issue

you originally stated that the computer was connecting wirelessly to
the router and you changed it to wired. yet, in the ipconfig /all
you posted, there is no listing at all for the wireless that is in
this computer, which I find strange. does the wireless adapter still
show in the computer device management list? what state is it in?
disabled/enabled?

On Tue, 25 Mar 2008 12:22:01 -0700, Dad Dude
<DadDude@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

nothing. it still doesn't work.

"Barb Bowman" wrote:

what happened after unbinding IPv6?

On Mon, 24 Mar 2008 13:31:02 -0700, Dad Dude
<DadDude@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Sorry about that. I was in the middle of working twelve hour night shifts and
had just slept. I am a little more awake now. Hopefully this is what you
needed to see. Thank you for all the help and I will try to unbind the IPv6
in the meantime.

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : New-one
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Intel(R) 82566DC Gigabit Network
Connecti
on
Physical Address. . . . . . . . . : 00-1B-FC-A5-1C-F9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::f429:e1d8:dd73:b652%8(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.4(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, March 24, 2008 4:18:13 PM
Lease Expires . . . . . . . . . . : Tuesday, March 25, 2008 4:18:13 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 201333756
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 6:

Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : isatap.home
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.4%12(Preferred)
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 7:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 02-00-54-55-4E-01
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . :
2001:0:cf2e:308c:10ec:1c82:3f57:fefb(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::10ec:1c82:3f57:fefb%10(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 10:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : 6TO4 Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

C:\Windows\system32>
"Barb Bowman" wrote:

try unbinding IPv6
that does not appear to be the full text output. it looks to be
missing some information. if this output is what resulted from
ipconfig /all, you need to go into device manager, delete the NICs,
shut down and reboot so that they are redetected.

how to unbind IPv6:
http://digitalmediaphile.wordpress.com/ipv6-how-to-unbind-from-a-nic-in-windows-vista/

On Sun, 23 Mar 2008 13:55:01 -0700, Dad Dude
<DadDude@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Barb,
I have an Actiontec MI424WR

I did the update for the router to make sure I had the most recent software
for it.

The Xbox comes up as IP 192.168.1.2

i do have another computer on the network but I took it off until this is
resolved and haven't plugged it back in yet. I did try everything I could
think of with it turned on and then decided to take it out of the equation
too.

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.

C:\Users\>ipconfig

Windows IP Configuration


Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : home
Link-local IPv6 Address . . . . . : fe80::f429:e1d8:dd73:b652%8
IPv4 Address. . . . . . . . . . . : 192.168.1.4
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1

Tunnel adapter Local Area Connection* 6:

Connection-specific DNS Suffix . : home
Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.4%12
Default Gateway . . . . . . . . . :

Tunnel adapter Local Area Connection* 7:

Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:cf2e:308c:1ceb:25dd:3f57:fefb
Link-local IPv6 Address . . . . . : fe80::1ceb:25dd:3f57:fefb%10
Default Gateway . . . . . . . . . : ::

Tunnel adapter Local Area Connection* 10:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :


"Barb Bowman" wrote:

what router do you have? brand. model. hardware rev. firmware
version?

you mentioned a cross over cable in one of your replies.

when the pc is using a wired connection, please get the text output
of ipconfig /all and paste it in here as a reply using these
instructions:

http://digitalmediaphile.wordpress.com/ipconfig-all-how-to-get-text-output/

On Sun, 23 Mar 2008 05:04:00 -0700, Dad Dude
<DadDude@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Sorry, I just worked a twelve hour shift at the hospital and I was a little
delerious when I wrote the last response.

I meant, NO it doesn't work if I take McAfee off the computer completely and
leave it wired. It will only work if I use my wireless connection from the
computer to the router and leave the xbox wired. As soon as I wire the pc it
doesn't recognize the xbox as a media center extender device. It only sees it
on the network map. No connection is seen from the xbox to the network or pc
at all as far as I can tell.

I have deleted the previous settings on the xbox hard drive that configure
it to the media center so it is like starting with a new xbox. I have the IP
address of the xbox and my computer and thought I may have to forward ports
or something but I am not sure how that all works or if that would actually
solve my problem since they were working through the same router before.

Could it have something to do with the PC having an IP address assigned to
it while it was wireless and now it needs a different IP assigned to stop a
conflict?

"Dad Dude" wrote:

Yes. It still works even with McAfee uninstalled. The thing is, if I switch
back to wireless, it works again. I can't figure it out. I am starting to
think it must either be something with the ports on the router, the network
card or something to that effect. The only thing that I changed was going
from wireless on my pc to wired on my pc. I was thinking something with
settings was causing a conflict.

Could a crossover wire cause this? I might have to check the actual wall
wires if that is the case. I have a great internet connection with both the
xbox and the computer while wired. The pc sees the xbox on the network map
but the media extender won't find it.

Thanks for the quick reply.

"Barb Bowman" wrote:

does it work when McAfee is completely uninstalled?

On Sat, 22 Mar 2008 20:11:22 -0700, Dad Dude
<DadDude@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Hi and hopefully someone has a solution to my issues.

I have a Hp with Vista media center and it is running McAfee and Widows
firewalls. The problem is, I originally had my network set up as wireless
from my computer to my router and the Xbox 360 was wired to the router. I
wanted to increase my connection speed so I wired my computer to the router.
My previous setup allowed me to connect to the xbox as an extender without
any issues but he minute I changed to a wired connection the media center
won't recognize the xbox. It still appears on the network when you look at
the full map of network devices. I went through all the programs and made
sure that media sharing is active with the xbox. I changed to different
ethernet cables, disabled all firewalls, and everything else I could think of
to figure out what was wrong. I talked to the support for my router, HP and
xbox with no solution. I even called McAfee to have them help. I now refer to
you guys and gals for a solution as no one else seems to know what the hell
they are talking about and it is really getting upsetting.

Thanks in advance
--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/

--

Barb Bowman
MS-MVP
http://www.microsoft.com/windowsxp/expertzone/meetexperts/bowman.mspx
http://blogs.digitalmediaphile.com/barb/
.

Relevant Pages

  • Re: My Network Places
    ... What you want is to set your router's IP, and thus your router's DHCP server, to use a subnet that is different than the one being used by your provider's router. ... I'm not sure why you are using a bridge and separate wireless router rather than merely wirelessly connecting direct to your "provider's" router, but there is a definite plus: because you have your own wireless router, you can effectively isolate yourself from the other users on your provider's router. ... As soon as you click the "Save Settings" button, you will lose your connection, because your computer will now be on a different subnet. ... It does not provide any security and it may cause problems, ...
    (microsoft.public.windowsxp.network_web)
  • Re: Xbox 360 and Media Center Connectivity Problems
    ... Both wired to the router is best. ... Second is Xbox 360 on wireless ... You should not have both the 360 and MCE machines wireless. ... I have a wireless g connection for internet access for my media center ...
    (microsoft.public.windows.mediacenter)
  • Re: wireless download speed
    ... Also, if this was done using a wireless connection, you can get a very ... In the case of a cable modem, ... and router rules can slow the router down. ...
    (alt.internet.wireless)
  • Re: Xbox 360 and Media Center Connectivity Problems
    ... I have a wireless g connection for internet access for my media center ... The xbox 360 only gets its internet connection ... Media Center pc wired to router ...
    (microsoft.public.windows.mediacenter)
  • Re: Xbox 360 and Media Center Connectivity Problems
    ... After much mucking about trying to get the router to provide the wireless ... connection to my primary wireless modem/router... ... "Chris H." ...
    (microsoft.public.windows.mediacenter)
Loading