Re: screen resolution

OK, I tried the Safe Mode and tried to change the screen resolution, like
you I got no change when boot normal, the display came back to the previous
setting I had before the safe mode.

What happens if you remove the display driver in safe mode (do not install
the driver), boot normal.

You should get the windows default video driver, since you removed the main
driver.

Windows default should run at 800 x 600.

If you can not see video on the new monitor in default windows video driver,
you have another problem that is not the screen resolution.

If your video card has a DVI and VGA output, the default video output in on
the VGA output and not on the DVI output.

If your monitor does not have a VGA input, you will have trouble configuring
the DVI output.


--
CSM1
http://www.carlmcmillan.com
--
"catherine" <catherine@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1B7A35E6-A50F-4B6F-95FE-383E70004763@xxxxxxxxxxxxxxxx
Hi,
I already tried that... but when i am in the safe mode, i 'm not able to
see the remining resolutions except 640x480 (there's only one option). So
this procedure didn't work. I tried another procedure.... while i'm in the
safe mode, i did uninstall the video drivers and then installed them after
booting in the normal mode... when i restart my pc after installation, i
face
the same problem. Can anybody give me a solution...? asap? please....


"CSM1" wrote:

Boot into Safe Mode.
You do that by tapping the F8 key during boot. Choose Safe Mode on that
screen.

While in Safe Mode change the Display setting to something in the range
of
the monitor, like 800 x 600 or 1024 x 768.

Then re-boot normal.

Check the spec on the monitor, I would guess that 1440 x 900 is out of
range, therefore the screen is black.

--
CSM1
http://www.carlmcmillan.com
--
"catherine" <catherine@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B280437A-6F73-479A-9257-62FEBF5D0458@xxxxxxxxxxxxxxxx
Hi,
I have a problem... after a virus attack, i've formatted my hard disk
and
installed a fresh copy of XP and drivers. After installing display
drivers, i
tried to select a high resolution of 1440x900 (i'm using a 15" monitor)
the
screen became blank and when i tried restarting my PC.... i realized
that
i
did a very 'good' mistake.... can anybody kindly get me out of this
blank
situation? asap?
please...

"Millie" wrote:

Hi

Thanks for the tip about LCDs. I'll dig out the manual and see what
the
native resolution is.
--
Millie


"Jaime" wrote:

And one other point to add, if you have a flat panel (LCD) display,
it
is
usually best to keep the resolution at the native resolution of the
monitor.
This information is usually found on the box or in the manual or by
bringing
up the on-screen display (usually a "Menu" button the monitor
itself).

If you have an older style CRT monitor, then it is not so important
,
you
can set the monitor to whatever looks best.
--
James
Orlando (Goofy says "Hey"), Florida

"Eric Baines" <EricBaines@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:9F4B6DB8-9745-4BA8-BCDA-EE2FA068CF53@xxxxxxxxxxxxxxxx
But if you set it for a higher resolution (assuming your display
card
and
monitor can cope) you could right click on your desktop and click
on
properties. This will let you change the display properties. On
the
Appearance tab, you can change the Font size, from normal to Large
or
even
Extra Large. If you click on the Effects button, you can click on
Use
Large
Icons. So you things should be sharper (within the limits
mentioned
in
earlier posts), but you keep large text and icons?

"Millie" wrote:

Hi Jaime

Thanks for such a detailed response! It's very informative. Given
that my
eyesight isn't what it used to be I might just leave the
resolution
as it
is.
I wouldn't cope with things being smaller.
--
Millie


"Jaime" wrote:

That is the double-edged sword of changing the screen
resolution -
you
get
more stuff on the screen, but much of the stuff that there
get's
smaller.

Screen res determines how many pixels of information are
displayed
on
the
screen; many items displayed on a PC are "pictures" composed of
a
fixed
number of pixels. For example, if a screen icon is 100x100
pixels
and
the
resolution of your monitor is set to 640x480, that icon would
be
filling up
about a fifth of the screen vertically (100/480). Now if you
increase
the
screen res to 1280x1024, that same icon's 100x100 pixels only
take
up
only a
tenth of the screen's verticle space (100/1024), so it will be
smaller.
If
an item has a fixed number of pixels and you increase the size,
it
will
probably look fuzzier, since the computer has to invent the
extra
pixels
needed to make it bigger.

Windows allows you to increase the size of the icons and text
on
the
desktop
to some degree, but if you increase the resolution, but then
make
everything
bigger, you haven't gained much really .

To further complicate things, not every type of image/screen
element is
made
up of a fixed number of pixels, many are, but some items are
actually
sort
of formulas that tell the PC how to create the shape of the
object. In
the
case of these items, you can keep making them as big as you
like
and
they
will still appear sharp, as the PC just changes the formula to
compensate
and add the details. This method is generally used with
geometric
shapes and
text, but not for items with complex lines and color shading,
like
photographs.
--
James
Orlando (Goofy says "Hey"), Florida


"Millie" <jackied@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:BC5FDB36-A435-48C0-BC5A-A69BF09B4C43@xxxxxxxxxxxxxxxx
Hi


Can someone please explain screen resolution to me? I
understand
when
I'm
using Photoshop the more pixels per inch the sharper an image
will
be.
Does
the same apply to screen resolution? If I increase it, will
the
text
be
sharper? Also, why do all the icons on my desktop get smaller
with
higher
resolution?

I've got it set to 1024x768 at the moment.
--
Millie










.

Loading