Re: asus tv fm 7133(NTSC)

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

I looked through your user's manual using the link you provided.
I noticed that you have a hybrid analog and DVB-T card. Note MC will only support one of these tuners without a TV Setup configuration change I suggest that you connect to the DVB-T tuner and try it.
The manual states that the tuner does support MCE, however, since no detailed specs were in the User's Manual I am guessing that MCE will only support the DVB-T tuner since the DVB-T signal is already MPEG2 encoded. This is also the most common scenario with hybrid analog DVB-T tuner cards and MCE.
"muonky" <muonky@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:F4571E41-008C-4E7B-BE90-FF52B9C8E8E4@xxxxxxxxxxxxxxxx
Well, Im not sure yet if my card meet the mce requirements, what I can tell
you is that I install the driver from here :
http://support.asus.com/download/download.aspx?SLanguage=en-us
if you cant see the driver, then in the options you select first multimedia,
then tv turner or so, finally asus tv fm..., then installed it and some other
sw that i found there and within that software i was able to watch tv, thats
why I assume the card meets the requirements, thanks, I will try what Doug
Knox told me, thanks btw if you can read this, Ill try it and then Ill let
you all know

"JW" wrote:

Are you sure that you Asus card has a driver for MCE. I could not find one
and that usually means that the card and its driver do meet the MCE
requirements. I could not find a detailed description so I could not see if
the card has an onboard MPEG2 encoder chip normally required for support of
MCE drivers.

"muonky" <muonky@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:83CB9D43-CF4A-4B8A-88CA-F4352CDA063B@xxxxxxxxxxxxxxxx
> Hi there, I just upgraded from xp home edition to media center, and I > cant
> get my card (asus tv fm 7133(NTSC)) to work under media center, I cant
> watch
> tv on media center, but I can watch it on a software I donwloaded from > the
> site of the tv turner, any ideas??? pleas anything will be helpfull,
> thanks
> in advance


.

Relevant Pages

  • Re: Support for DVB-S CI
    ... > Question - I'm a Sky digital subscriber and have Sky linked to my MCE ... MCE 2005 does not work with the Twinhan DVB-S card _AT ALL_. ... In terms of satellite support, Microsoft is YEARS behind what is ...
    (microsoft.public.windows.mediacenter)
  • Re: Can MCE2005 record Cable-Originated HDTV Broadcasts?
    ... The problem why microsoft does not support HD content has to do with Copy ... This should be supported in Longhorn with a new graphic card that have ... >> I understand that the ATI HDTV WONDER will only receive OTA ... Annoyingly MCE doesn't support these either - just OTA digital ...
    (microsoft.public.windows.mediacenter)
  • Re: Live TV and Recorded TV skips in MCE
    ... I have this problem I have just installed my new MCE and when watching ... My Graphics card is: ... Haupage 1300 MCE Dvb-t ... The Hauppauge card is a hybrid that does analogue or DVB-T but I ...
    (microsoft.public.windows.mediacenter)
  • Re: MCE 2005 doesnt really support HDTV yet
    ... and I don't understand your statement "if the analog card gets ... > My point was that my OTA digital tuner card will "get me both SD and HD ... in practice with MCE, no. it requires a driver from the card vendor. ... why did you buy a card without MCE support? ...
    (microsoft.public.windows.mediacenter)
  • Re: what level MSDN?
    ... Windows 95 requirements were basically CPU, RAM, HDD Space. ... MCE would require... ... --Atleast a 2 channel sound card (You would have to add information about ... --HDTV support, do you really want to read that on the box with all of this ...
    (microsoft.public.windows.mediacenter)