Re: update rollup refuses to unstall on my pc {?}

Thank you for your reply again: The web site your link does direct to
provides more than one program.

Your link goes to somewhere in between! Which was the program
you want me to download and run on my computer? The Media
Center Ident Set on the very bottom of the page,right? Nothing else?

Thank you,
Steve

"Gary Tsang" <gtsangDELETE@xxxxxxxxxxx> schrieb im Newsbeitrag
news:e8DNkujpHHA.4032@xxxxxxxxxxxxxxxxxxxxxxx
Ok, as I suspected..

Run this utility by Mark Salloway.

Media Center Ident Set
http://salloway.org.uk/mediacenter/util/index.htm#config

Something has caused the ident value in the registry to be set improperly.
This utility will fix it, and then Update Rollup 2 should install
normally.

A common cause of this issue is that a user would install Windows XP
Service Pack 2 up top of Media Center 2005. This is a redundant step, as
Media Center 2005 already has Windows XP SP2 integrated into it. An
unfortunate side effect of this redundant step is that the Media Center
ident value is set to 2.8, which prevents Media Center 2005 Update Rollup
2 from installing.

--
Gary Tsang
http://www.gtsang.com

Microsoft MVP - Windows Media Center
http://www.microsoft.com/mvp



"Steve Miller" <misterblues39@xxxxxxxxxxx> wrote in message
news:uGDq5jgpHHA.596@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

Thanks again. The message is in german partly. hopes it helps anyways.

Steve

0.250: 2006/12/29 14:17:01.796 (local)
0.250: c:\b932577a77191d949819\update\update.exe (version 6.2.29.0)
0.250: Hotfix started with following command line:
0.422: Return Value From IsMediaCenterPC = 1
0.422: IsMediaCenterPC returned value( 0x1 ) which is Equal To 0x1
0.422: Condition succeeded for section PreReq.SingleOp.MediaCenter in
Line 1 of PreRequisite
0.422: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is
Not Equal To Specified Value
0.422: Condition Check for Line 2 of PreRequisite returned FALSE
0.422: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.438: KB925766 Setup hat folgenden Fehler festgestellt: Setup kann
nicht fortgesetzt werden, da eine oder mehrere Anforderungen für die
Installation von KB925766 nicht erfüllt wurden. Weitere Informationen
sind in der Protokolldatei c:\windows\KB925766.log enthalten.
0.453: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.453: Setup kann nicht fortgesetzt werden, da eine oder mehrere
Anforderungen für die Installation von KB925766 nicht erfüllt wurden.
Weitere Informationen sind in der Protokolldatei c:\windows\KB925766.log
enthalten.
12.172: Message displayed to the user: Setup kann nicht fortgesetzt
werden, da eine oder mehrere Anforderungen für die Installation von
KB925766 nicht erfüllt wurden. Weitere Informationen sind in der
Protokolldatei c:\windows\KB925766.log enthalten.
12.172: User Input: OK
12.172: Update.exe extended error code = 0xf0f4
12.172: Update.exe return code was masked to 0x643 for MSI custom action
compliance.

"Gary Tsang" <gtsangDELETE@xxxxxxxxxxx> schrieb im Newsbeitrag
news:%23EqL%23IgpHHA.4772@xxxxxxxxxxxxxxxxxxxxxxx
Can you post the details?

It's hard for anyone to guess which fix would be appropriate if you
don't help us by telling us the exact error message.

I suspect the ident value is wrong, but it would definitely prevent a
wild goose chase if we knew what the error message is.

--
Gary Tsang
http://www.gtsang.com

Microsoft MVP - Windows Media Center
http://www.microsoft.com/mvp



"Steve Miller" <misterblues39@xxxxxxxxxxx> wrote in message
news:%23I3Lw6bpHHA.4544@xxxxxxxxxxxxxxxxxxxxxxx
Some requirement are not met to install the rollup. Should
I have a couple of days off first fixing that?

Steve

"Gary Tsang" <gtsangDELETE@xxxxxxxxxxx> schrieb im Newsbeitrag
news:utzqsALpHHA.4544@xxxxxxxxxxxxxxxxxxxxxxx
What error(s) are you seeing?

The contents of KB900325.log in your Windows directory should give
you/us some clues.


--
Gary Tsang
http://www.gtsang.com

Microsoft MVP - Windows Media Center
http://www.microsoft.com/mvp



"Steve Miller" <misterblues39@xxxxxxxxxxx> wrote in message
news:uJp6nkCpHHA.4112@xxxxxxxxxxxxxxxxxxxxxxx
Hello dear fellows!

I have got Windows Media Center which is fantastic
and so forth. Now, I'm in trouble updating to update
rollup which I have had installed on the computer,
previously. I'm reading about a Framework 1.1
hotfix to remove, apparently not installed. So, no
solution for ME.

Thanks,
Steve

Does know what's going on? Visit:
http://www.mdcc.de/rhythm.university/



















.

Relevant Pages

  • Re: WMP 11, cannot add files to library
    ... media was gone and could not add media. ... into Media Player, is the library then able to add files and be functional? ... In the Windows XP - Software Updates section, click Windows Media ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: WMP 11, cannot add files to library
    ... The real issue is WMP ... Windows Media Development Team ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: WMP 11, cannot add files to library
    ... I'm gonna try this rename fix, but you didn't answer the question "what ... Windows Media Development Team ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: WMP 11, cannot add files to library
    ... Windows Media Development Team ... See http://zachd.com/pss/pss.html for some helpful WMP info. ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: update rollup refuses to unstall on my pc {?}
    ... Media Center Ident Set part of the page. ... Microsoft MVP - Windows Media Center ... Anforderungen für die Installation von KB925766 nicht erfüllt wurden. ... Update.exe extended error code = 0xf0f4 ...
    (microsoft.public.windows.mediacenter)