Re: update rollup refuses to unstall on my pc {?}

Ok, as I suspected..

Run this utility by Mark Salloway.

Media Center Ident Set
http://salloway.org.uk/mediacenter/util/index.htm#config

Something has caused the ident value in the registry to be set improperly.
This utility will fix it, and then Update Rollup 2 should install normally.

A common cause of this issue is that a user would install Windows XP Service
Pack 2 up top of Media Center 2005. This is a redundant step, as Media
Center 2005 already has Windows XP SP2 integrated into it. An unfortunate
side effect of this redundant step is that the Media Center ident value is
set to 2.8, which prevents Media Center 2005 Update Rollup 2 from
installing.

--
Gary Tsang
http://www.gtsang.com

Microsoft MVP - Windows Media Center
http://www.microsoft.com/mvp



"Steve Miller" <misterblues39@xxxxxxxxxxx> wrote in message
news:uGDq5jgpHHA.596@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

Thanks again. The message is in german partly. hopes it helps anyways.

Steve

0.250: 2006/12/29 14:17:01.796 (local)
0.250: c:\b932577a77191d949819\update\update.exe (version 6.2.29.0)
0.250: Hotfix started with following command line:
0.422: Return Value From IsMediaCenterPC = 1
0.422: IsMediaCenterPC returned value( 0x1 ) which is Equal To 0x1
0.422: Condition succeeded for section PreReq.SingleOp.MediaCenter in Line
1 of PreRequisite
0.422: SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Ident is Not
Equal To Specified Value
0.422: Condition Check for Line 2 of PreRequisite returned FALSE
0.422: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.438: KB925766 Setup hat folgenden Fehler festgestellt: Setup kann nicht
fortgesetzt werden, da eine oder mehrere Anforderungen für die
Installation von KB925766 nicht erfüllt wurden. Weitere Informationen sind
in der Protokolldatei c:\windows\KB925766.log enthalten.
0.453: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
0.453: Setup kann nicht fortgesetzt werden, da eine oder mehrere
Anforderungen für die Installation von KB925766 nicht erfüllt wurden.
Weitere Informationen sind in der Protokolldatei c:\windows\KB925766.log
enthalten.
12.172: Message displayed to the user: Setup kann nicht fortgesetzt
werden, da eine oder mehrere Anforderungen für die Installation von
KB925766 nicht erfüllt wurden. Weitere Informationen sind in der
Protokolldatei c:\windows\KB925766.log enthalten.
12.172: User Input: OK
12.172: Update.exe extended error code = 0xf0f4
12.172: Update.exe return code was masked to 0x643 for MSI custom action
compliance.

"Gary Tsang" <gtsangDELETE@xxxxxxxxxxx> schrieb im Newsbeitrag
news:%23EqL%23IgpHHA.4772@xxxxxxxxxxxxxxxxxxxxxxx
Can you post the details?

It's hard for anyone to guess which fix would be appropriate if you don't
help us by telling us the exact error message.

I suspect the ident value is wrong, but it would definitely prevent a
wild goose chase if we knew what the error message is.

--
Gary Tsang
http://www.gtsang.com

Microsoft MVP - Windows Media Center
http://www.microsoft.com/mvp



"Steve Miller" <misterblues39@xxxxxxxxxxx> wrote in message
news:%23I3Lw6bpHHA.4544@xxxxxxxxxxxxxxxxxxxxxxx
Some requirement are not met to install the rollup. Should
I have a couple of days off first fixing that?

Steve

"Gary Tsang" <gtsangDELETE@xxxxxxxxxxx> schrieb im Newsbeitrag
news:utzqsALpHHA.4544@xxxxxxxxxxxxxxxxxxxxxxx
What error(s) are you seeing?

The contents of KB900325.log in your Windows directory should give
you/us some clues.


--
Gary Tsang
http://www.gtsang.com

Microsoft MVP - Windows Media Center
http://www.microsoft.com/mvp



"Steve Miller" <misterblues39@xxxxxxxxxxx> wrote in message
news:uJp6nkCpHHA.4112@xxxxxxxxxxxxxxxxxxxxxxx
Hello dear fellows!

I have got Windows Media Center which is fantastic
and so forth. Now, I'm in trouble updating to update
rollup which I have had installed on the computer,
previously. I'm reading about a Framework 1.1
hotfix to remove, apparently not installed. So, no
solution for ME.

Thanks,
Steve

Does know what's going on? Visit:
http://www.mdcc.de/rhythm.university/

















.

Relevant Pages

  • Re: WMP 11, cannot add files to library
    ... media was gone and could not add media. ... into Media Player, is the library then able to add files and be functional? ... In the Windows XP - Software Updates section, click Windows Media ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: update rollup refuses to unstall on my pc {?}
    ... Media Center Ident Set ... Microsoft MVP - Windows Media Center ... Setup kann nicht fortgesetzt werden, ... Anforderungen für die Installation von KB925766 nicht erfüllt wurden. ...
    (microsoft.public.windows.mediacenter)
  • Re: WMP 11, cannot add files to library
    ... The real issue is WMP ... Windows Media Development Team ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: WMP 11, cannot add files to library
    ... I'm gonna try this rename fix, but you didn't answer the question "what ... Windows Media Development Team ... install it (be sure to deny the Urge installation initially, ...
    (microsoft.public.windowsmedia.player)
  • Re: update rollup refuses to unstall on my pc {?}
    ... Media Center Ident Set part of the page. ... Microsoft MVP - Windows Media Center ... Anforderungen für die Installation von KB925766 nicht erfüllt wurden. ... Update.exe extended error code = 0xf0f4 ...
    (microsoft.public.windows.mediacenter)
Loading