Re: NAS and extenders

Shouldn't be a problem... if you are using wired Ethernet.

Your NAS and PC are no doubt connected through an
Ethernet switch (built into your router) each of these
switch ports can operate at 100Mbps full duplex, i.e.
your PC can transmit at 100Mbps while also receiving at
100Mbps, giving a total aggregate capacity of 200Mbps.
You wont actually achieve this in reality, but you can get close
if the network cards are recent.

So data from the NAS will be received into the PC on a 100Mbps
channel and be transmitted back out on the a 100Mbps channel.
So you will be making good use of your network switch/network
cards full duplex capability. NB: Don't think that configuring your
network card to full duplex will be a good idea... just let auto
negotiation set it up.

If your extenders are also wired to the switch they will also
each have their own 100Mbps Full Duplex port on the switch
so bandwidth just isn't a problem here, as streaming a standard
definition DVD will only take about 2/3Mbps and you have
100Mbps to each of your extenders.

To see how your network is performing open Task Manager
on the PC and select the network tab, then start viewing
a video on 1 extender and see what the network utilisation
goes upto, then start a 2nd video on the next extender and
review the network utilisation, you should see a step change,
then to the 3rd extender and again see the change.

You can now see that you will be using maybe 12-20Mbps
which means you are just ticking over.... :)

Of course if your extenders are wireless then it is a different
matter, as you will have a maximum bandwidth of 54Mbps
which is shared amongst the 3 extenders, and in reality that
54Mbps is actually only the equivalent of 24Mbps on a wired
network, so even in ideal conditions that is 24Mbps being
shared by/fought over by three extenders, so you will have
problems but the problem isn't between the NAS and PC but in
the wireless medium.

So the moral of the story.... wire those extenders....!!




"Ron P." <Ron P.@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:632779B0-F3CC-4AA8-8DFF-B681EDF79096@xxxxxxxxxxxxxxxx
I have MCE 2005 and 3 extenders which run great. If I add a NAS it seems
the
data would travel from the NAS to MCE PC then back through router to the
MCXs. How would this affect my MCX performance?


.

Relevant Pages

  • Re: NAS and extenders
    ... All my MCXs are wired. ... from a alternate PC (simulated NAS) through router to MCE to MCXs and watch ... if the network cards are recent. ... 100Mbps to each of your extenders. ...
    (microsoft.public.windows.mediacenter)
  • Re: Backup to USB works but to NAS fails
    ... There is a 30' stretch from the server to a hub (which doesn't have ... Then 3' to the NAS drive. ... Can you reduce things down to one decent switch. ... Poor network throughput, is most commonly, use of cheap 25$ ...
    (microsoft.public.windows.server.sbs)
  • Re: Backup to USB works but to NAS fails
    ... Then 3' to the NAS drive. ... If we put another network card in the server we ... Can you reduce things down to one decent switch. ... Poor network throughput, is most commonly, use of cheap 25$ switches. ...
    (microsoft.public.windows.server.sbs)
  • Re: NAS and extenders
    ... With the Network tab of task manager selected, click view, then Network ... Your NAS and PC are no doubt connected through an ... Ethernet switch each of these ... 100Mbps to each of your extenders. ...
    (microsoft.public.windows.mediacenter)
  • RE: IP address conflicts
    ... If you get a network vendor like Network Hardware Resale ... >> It's amazing how money will appear out of thin air if certain oxen get ... the switch you are suggesting I cannibalise uses the EtherToken ... When dealing with a bureaucracy I have found the most effective method is ...
    (freebsd-questions)
Loading