Re: TV Out & Remot Problem

So you have the MCE drives for your 350 card instead of the windows drivers
used by WinTV2K and other appls and you can not get the card to work
properly in MCE and you do not get decent S-Video out from your graphics
card to your TV, is this correct?
Under MCE the inpcoming audio and video is compressed which causes a loss of
PQ when decoded and played back on your display(s).
What is your graphics card: make, model and driver revision level?
"Jimmyjoemeeker02" <Jimmyjoemeeker02@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:BF57A1FE-B253-49E9-A17D-3483C6B8E434@xxxxxxxxxxxxxxxx
I will read your blog Jason and thanks for your help. I have used this same
card with three different pvr apps. Mythtv Linux based worked fine with
the
tv out. And recently GBPVR the tv out worked ok too. I switched to Windows
MCE 2005 becuase I wanted a stable supported system without hunting
through
forums for answers. I just found myself doing it again. Any input would be
helpful, I have tried the lastest drivers for the Hauppauge Pvr 350 and I
can
stream live tv using WebGuide so I know the card is ok.

"Jason Tsang" wrote:

Your video card (not your tv tuner card) would handle output out to your
TV.

--
Jason Tsang - Microsoft MVP

Read my blog for the latest in Media Center topics
(and other topics that interest me)
http://jtsang.blogspot.com

More information by me
http://jtsang.mvps.org
http://www.classicsunveiled.com

Find out about the MS MVP Program -
http://mvp.support.microsoft.com/default.aspx



"Jimmyjoemeeker02" <Jimmyjoemeeker02@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message news:F2BEDE45-AF86-4B34-B384-E04D27F70D2D@xxxxxxxxxxxxxxxx
Hello,

I Can't get my hauppauge pvr 350 to display on my tv. It runs on my
computer
but is very slow and blurry. I also can't get my hauppage remote to
work.
The
drivers installed ok.





.

Relevant Pages

  • Re: Well, Im neary there.........
    ... One brute-force approach would be swap the video card with one from another ... If so, does it look the same in playback, either in MCE or if you just are ... which version of the drivers? ...
    (microsoft.public.windows.mediacenter)
  • Re: No live TV - help please!
    ... TV in MCE with your card since MCE requires that analog TV be MPEG2 ... drivers do not have this functionality. ... I've run the Windows XP Video Decoder Chekup Utility if that helps? ...
    (microsoft.public.windows.mediacenter)
  • Re: No live TV - help please!
    ... Have you tried re-installing the Hauppauge card drivers? ... socket on the back of the PC, open Windows MCE and go to Live TV. Hey ...
    (microsoft.public.windows.mediacenter)
  • Re: Cannot play DVD or TV in MCE 05 - please help!
    ... The TV tuner card is MCE certified and I'm using the most current drivers ... Your graphics card card/driver does not support DX9 output. ... You are using regular Windows drivers for your tuner card and not the MCE ...
    (microsoft.public.windows.mediacenter)
  • Re: No live TV - help please!
    ... Is it some setting in MCE? ... TV in MCE with your card since MCE requires that analog TV be MPEG2 ... drivers do not have this functionality. ...
    (microsoft.public.windows.mediacenter)