Re: Installing a 360 Media Center Extender

Double-checking - does your "Yeah, I've done that" comment a couple posts
down relate to trying a direct Ethernet connection between the PC and Xbox?
If so, did you manually reset the Windows firewall profile to private after
connecting them?

--
This posting is provided "AS IS" with no warranties, and confers no rights.

"mrskippy" <mrskippy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E2C096A4-6E7A-4FEA-B9A3-2C3568CBEE26@xxxxxxxxxxxxxxxx
No difference.

"Todd Bowra [MSFT]" wrote:

You mentioned in a different thread having OneCare installed, but
disabled.
Please try temporarily uninstalling it to see if that makes a difference.

--
This posting is provided "AS IS" with no warranties, and confers no
rights.

"mrskippy" <mrskippy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D608595A-2A75-4AA4-BA40-E9F10CA3EC5E@xxxxxxxxxxxxxxxx
Log Name: Media Center
Source: Mcx2Dvcs
Date: 12/6/2006 5:56:43 PM
Event ID: 405
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Brian-PC
Description:
Windows Media Center Extender setup failed with the following error
code:
-209.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event";>
<System>
<Provider Name="Mcx2Dvcs" />
<EventID Qualifiers="0">405</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2006-12-07T01:56:43.000Z" />
<EventRecordID>39</EventRecordID>
<Channel>Media Center</Channel>
<Computer>Brian-PC</Computer>
<Security />
</System>
<EventData>
<Data>-209</Data>
</EventData>
</Event>

"Todd Bowra [MSFT]" wrote:

Please check Event Viewer for any messages corresponding to the time
that
you encountered the error during install and post them here.

--
This posting is provided "AS IS" with no warranties, and confers no
rights.

"mrskippy" <mrskippy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0D0A8C0D-4CAA-4367-8D8F-82A9FA9B41E9@xxxxxxxxxxxxxxxx
Yeah, I've done that ... in both cases the Vista is now seeing the
360.
It's
much better than XP was doing (couldn't see it). But, when it gets
to
the
configuring part ... it hangs:

"An error was encountered while configuring your computer"

So, I'm figuring some sort of Vista issue.



"Todd Bowra [MSFT]" wrote:

It's possible that your router is misbehaving and dropping
necessary
traffic. Temporarily connecting your PC directly to your Xbox 360
using
an
Ethernet cable (bypassing your router) will allow you to confirm if
this
is
the case.

--
This posting is provided "AS IS" with no warranties, and confers no
rights.

"mrskippy" <mrskippy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D712BC34-7230-4398-B647-F20FF46E7844@xxxxxxxxxxxxxxxx
I'm confused. I simply have the 360 directly connected into a
router
port.
There was a dialog box that said a Media Extender / Xbox 360
found
...
but,
it can't configure. That's the issue I'm having now.

"Todd Bowra [MSFT]" wrote:

Note that when you directly connect your Xbox 360 to your PC,
the
Windows
Firewall will automatically switch to the public (more
restricted)
profile
because of the absense of a DHCP server. In order to get your
Extender
connected in this state, you'll either need to add/re-add the
Extender
after
directly connecting the PC to the Xbox 360 or manually switch
the
firewall
back to the private profile.

--
This posting is provided "AS IS" with no warranties, and confers
no
rights.

"Dana Cline - MVP" <dcline@xxxxxxxxxxxxx> wrote in message
news:Od6yNt6FHHA.4464@xxxxxxxxxxxxxxxxxxxxxxx
Wow, I had no problems with that combination, but I have a
different
router. Vista installed with all defaults, found the
tuners...got
Media
Center set up fine. I then went to the 360 and told it to look
for a
Media
Center...it gave me the code number to enter, I went to the
Vista
box
and
it already had a dialog where it wanted that code number, then
we
were
good to go.

Now, I _did_ hook the 360 to the network first, and let it go
find
the
xbox live web site and download updates, so I knew the
connection
from
the
360 to the network was good. You can cable the 360 _direct_ to
your
PC's
network port and try that...assuming that works, then your
router
is
the
issue. If it fails, then it could be the 360 wired network
port...have
you
tried the wireless yet?

Dana Cline - MCE MVP

"mrskippy" <mrskippy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
message
news:6A14BF2D-C495-4F51-B5DF-A3D6B77BCC38@xxxxxxxxxxxxxxxx
I'm having trouble getting my Xbox 360 Media Center Extender
up
and
running.
I've done a clean install of the Vista RC1 Ultimate Edition.
I've
tried
going
step by step through the process. I just can't seem to get my
Xbox
360
tied
to the computer. Could someone give me a nice step-by-step
guide
assuming
I
have a clean install, with no AV, Firewall, etc. installed
other
than
what is
included in Vista.

Am running on a Linksys wired router. Have put the port
information
there.
FWIW ... on an earlier install I got it to see the 360, but
than
it
couldn't
configure it.

Hopefully someone can help me get up and running, so that I
can
finally
enjoy the Media Center Experience on my television.
















.

Relevant Pages

  • Re: Installing a 360 Media Center Extender
    ... what do you see on your Xbox 360 during the setup process? ... for use when you're connecting to hot spot wireless networks and the ... your home network), the firewall will switch to the public profile. ... you encountered the error during install and post them here. ...
    (microsoft.public.windows.mediacenter)
  • Re: WORM from MS Update Site
    ... The firewall reports regular attacks on my system. ... But I have never gotten Blaster or any other worm. ... >Install or enable a firewall IMMEDIATELY, ... >> worm virus on pc when connecting to the MS UPDATE site ...
    (microsoft.public.windowsxp.security_admin)
  • RE: Xbox MCE Nightmare
    ... Are you trying to install the original version, ... the XBox game disc and the time you need to enter the key on your MCE PC. ... SP2 firewall, I'd try disabling it before trying the install. ...
    (microsoft.public.windows.mediacenter)
  • Re: XBOX Extender update installation problem
    ... > the Windows Firewall Exceptions table, ... Media Center Extender; does it list the version as 6.1.2700.2214? ... On your Xbox, pull the IR receiver out once you're connected to the PC; ... Inserted key into MCE Extender Wizard, install completed and> system worked. ...
    (microsoft.public.windows.mediacenter)
  • Re: Yes or No: Zone Alarm Pro on a new PC (Win XP Home)
    ... >> ver 2 hardware firewall ... >> I am wondering about which product to install first such as Zone ... download anything, ever, then perhaps the WinXP firewall would suffice. ... that may end up inadvertently on the machine from connecting out. ...
    (comp.security.firewalls)