Re: Cannot Tune TV Channels

Tech-Archive recommends: Speed Up your PC by fixing your registry

jw, here last notice, a few weeks ago, used christv to test livetv (no
probemo), yesterday donwload a proggy called got all media freeware and this
app let me watch tv without any problem, so i figure some things about
this... my tv tuner has no problem so there no way to return to hp support,
windows media center has the same problems like windows me after microsoft
put on market, drivers has to be certified to wmce.

another thing, theres any way to check what kind of card i have? using
software? please let me know

brgds

alberto

"JW" wrote:

In the future do not accept driver updated for MCE devices from WinUpdate as
they are often way out of date or incompatible with your MCE system..
Conexen dt is the tuner chip manufacturer not the card manufactuer.
I got lots of hits on Google for Falcon TV Tuner so you can start from
thned.
"PERDIDA DE SEÑAL - TV EN VIVO"
<PERDIDADESEALTVENVIVO@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2E391238-0DD5-43DD-AFE0-21B111D89A58@xxxxxxxxxxxxxxxx
same problem here but my pc hp media center 7350la, tv tuner conexant
falcon
II video capture, nvidia 6200 turbocache pci express, got last drivers of
all
components audio, video and tv tuner, but finally doesn`t work. any idea?

"alexshc" wrote:

I have exactly the same problem as you. I am using the Leadtek PVR2000,
it
tried to scan the TV service under MCE but reported no service/channel
was
found. But when I use the WinPVR from Leadtek, it did found 13 service
channel.



"Dim" wrote:

I've set up my new MCE PC. I have a fast CPU, plenty of RAM, MCE
compatible
video card with MCE drivers, Intervideo DVD decoder and a Hauppauge
PVR500
Tuner Card. My problem is that MCE cannot tune the channels.

If I plug my cable into my TV I get a perfect signal, so I know the
problem
isn't my signal, or the cables.

If I use the Hauppauge video capture utility then I can tune in
channels and
recieve a picture, so I know the problem isn't with video drivers or
decoding.

When I try to setup my signal in MCE I just get a blank screen with 'No
signal selected.' Nothing I try seems to change this. Any advice?



.

Relevant Pages

  • Using a "not supported" TV tuner card
    ... tuners, video cards, etc) that is supported by Windowx XP MCE 2005. ... I got a TV card that will allow me to capture video into the right ... I'll use the software supplied with the tuner. ...
    (microsoft.public.windows.mediacenter)
  • Re: Analog TV tuners not working in mce
    ... Have you been able to get the FM tuner to work in MCE? ... by using the MMC ATI application. ... When using the AIW card with MCE you will ...
    (microsoft.public.windows.mediacenter)
  • Re: Advice to new Media Center builder
    ... point you're going to want to watch media in High Definition. ... to use of a cable card tv tuner. ... Any last minute advice for a MCE virgin? ...
    (microsoft.public.windows.mediacenter)
  • Re: MCE and Haupagge Digital
    ... You need to get the remote separately. ... Regarding HD, theoretically, you could get a DVB-C tuner (for VirginMedia ... As MPEG2 is supported by MCE even for HD ... Today you can do HD on a PC from Sky (using a genuine viewing card) but not ...
    (microsoft.public.windows.mediacenter)
  • Emuzed Angel Dual HQ Tuner for MCE 2005?
    ... The Emuzed Angel Dual TV Tuner is a dual-tuner PCI Card, ... View or Record analog video from a Composite, ... The Emuzed Angel Dual TV Tuner hardware comes with the following software: ... The Emuzed Angel Dual TV Tuner is supported by Microsoft’s Windows XP Media ...
    (microsoft.public.windows.mediacenter)