Touchscreen

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hi

I have a MCE2005 setup and running nicely on my 30" LCD TV via VGA
connection. I have just aquired a 17" 1024x768 LCD touchscreen which i
thought would be cool to use to change channel and choose music etc.
How could I do this please? I need to use VGA to connect to my LCD TV
because DVI wont do the resolution I need, and I need to use VGA for
the touchscreen as it's the only interface, but I do have 2 VGA outs on
my Media Center.

Any suggestions very welcome.

Thanks

.

Relevant Pages

  • Re: Help needed for Samsung LCD - No resolution is working!
    ... With a Samsung you probably also have the option to use the VGA interface which will not overscan your inputs since the Samsung is not trying to emulate a standard CRT TV over VGA like it does when using component or DVI/HDMI. ... I have a Samsung 40 inch LCD, ...
    (microsoft.public.windows.mediacenter)
  • Re: Laptop External VGA to PC Input of Sharp LC26DV22U
    ... I borrowed a VGA ... | IBM P260 CRT monitor. ... The LCD ... computer monitors) going to the VGA port of an LCD TV. ...
    (alt.tv.tech.hdtv)
  • Re: AGP video card that can handle clone in MCE
    ... How long is that cable (VGA?) to the new LCD TV? ... horsepower to use clone mode to two hd displays. ... so I'm assuming the 6600gt is the bottleneck. ...
    (microsoft.public.windows.mediacenter)
  • Re: RGB to VGA on a IIGS (again)
    ... any new RGB to VGA upscaling converters out that were particularly ... The 'simple' solution is to use an LCD TV with a SCART input on it, ... placing atop an Apple II) and the results were quite acceptable. ... I would be surprised to see Video to VGA Converter at ...
    (comp.sys.apple2)
  • Re: Dual display -> Desktop out on secondary display
    ... most SBC's with VGA and LCD capabilities have a BIOS setting to disable the ... LCD interface. ... alternately in the Display CPL applet, when using multiple monitors, you can ...
    (microsoft.public.windowsxp.general)