xbox 360 "Session Terminated"

After reading through a lot of these threads, I'll post a lot of the relevant
information. My main problem is that I'm unable to stay connected to my
Media Center PC.

I've uninstalled and reinstalled.
I've uninstalled Media connect and Media Center Extender rebooted and
reinstalled.
I have static IP's on both the 360 and my PC.
In my registry settings,
HKLM\Software\\Microsoft\MediaCenterPeripheral\DevieTable - I have a device
listed. That was after deleting it the first time and reinstalled.
In the Media Center Extended Manager, my xbox shows up, but isn't connected.
I have a fresh install of Media Center with SP2 rollup, with absolutely no
other software installed. It is a wireless connection to a Linksys WRT54G of
which the xbox is plugged directly into. The firewall on the router is
turned off.

Here is a snippet from dvcconn.log
***********************************************************
Thursday, 26 January 2006 19:45:52
***********************************************************
7:45:52 PM : Checking OS version.

7:45:52 PM : Checking MCE version.

7:45:52 PM : MCE version = Emerald.

7:45:52 PM : Checking only instance of installer.

7:45:52 PM : CmdLine: Connection Wizard.

7:45:52 PM : CmdLine: Skin = Xenon.

7:45:52 PM : Verifying user is Administrator.

7:45:52 PM : Verifying EULA is present.

7:45:52 PM : Verifying MCE is NOT installed on a dynamic disk.

7:45:52 PM : Verifying OS is NOT Longhorn.

7:45:52 PM : Verifying MCE version.

7:45:52 PM : OS is Emerald : Verifying Sessions QFE is installed.

7:45:52 PM : Verifying NIC is present.

7:45:52 PM : Checking if Media Center First Run has been completed.

7:45:52 PM : Start conditions met.

7:46:28 PM : Turning on the InOOBE flag.

7:46:47 PM : Configuring Terminal Services policy.

7:46:48 PM : Configuring Security Event Log retention.

7:46:48 PM : User chose Manual Settings option.

7:47:01 PM : Checking Fast-User Switching and Remote Connections settings.

7:47:01 PM : RDP enabled.

7:47:01 PM : FUS enabled.

7:47:01 PM : Checking if MCX ports are open in ICF.

7:47:01 PM : MCX ports are already open.

7:47:09 PM : Saving Media Discovery folders.

7:47:09 PM : Media Discovery folders saved.

7:47:09 PM : Power management IS NOT enabled.

7:47:20 PM : Cancel confirmed by user.

7:47:20 PM : Turning off the InOOBE flag.

7:47:20 PM : Exiting

I have UPnP and SSDP installed.

C:\Documents and Settings\Jason>netsh
netsh>winsock
netsh winsock>show helper
Helper GUID DLL Filename Command
-------------------------------------- ------------ -------
{00770721-44EA-11D5-93BA-00B0D022DD1F} HNETMON.DLL bridge
{CC41B21B-8040-4BB0-AC2A-820623160940} DGNET.DLL diag
{8B3A0D7F-1F30-4402-B753-C4B2C7607C97} FWCFG.DLL firewall
{0705ECA1-7AAC-11D2-89DC-006008B0E5B9} IFMON.DLL interface
{89D00931-1E00-11D3-8738-00600837C775} IFMON.DLL ip
{05BB0FE9-8D89-48DE-B7BB-9F138B2E950C} IPV6MON.DLL ipv6
{F1EFA7E5-7169-4EC0-A63A-9B22A743E19C} IPV6MON.DLL 6to4
{F1EFA7E5-7169-4EC0-A63A-9B22A743E19C} IPV6MON.DLL isatap
{86A3A33F-4D51-47FF-B24C-8E9B13CEB3A2} IPV6MON.DLL portproxy
{0705ECA2-7AAC-11D2-89DC-006008B0E5B9} RASMONTR.DLL ras
{42E3CC21-098C-11D3-8C4D-00104BCA495B} RASMONTR.DLL aaaa
{E0C5D007-D34C-11D2-9B76-00104BCA495B} RASMONTR.DLL appletalk
{13D12A78-D0FB-11D2-9B76-00104BCA495B} RASMONTR.DLL ip
{6FB90155-D324-11D2-9B76-00104BCA495B} RASMONTR.DLL ipx
{69F21BC3-D349-11D2-9B76-00104BCA495B} RASMONTR.DLL netbeui
{65EC23C0-D1B9-11D2-89E4-006008B0E5B9} IPMONTR.DLL routing
{0705ECA0-7AAC-11D2-89DC-006008B0E5B9} IPMONTR.DLL ip
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL autodhcp
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL dnsproxy
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL igmp
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL nat
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL ospf
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL relay
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL rip
{0705ECA3-7AAC-11D2-89DC-006008B0E5B9} IPPROMON.DLL routerdiscovery
{B1641451-84B8-11D2-B940-3078302C2030} IPXMONTR.DLL ipx
{D3FCBA3A-A4E9-11D2-B944-00C04FC2AB1C} IPXPROMN.DLL netbios
{D3FCBA3A-A4E9-11D2-B944-00C04FC2AB1C} IPXPROMN.DLL rip
{D3FCBA3A-A4E9-11D2-B944-00C04FC2AB1C} IPXPROMN.DLL sap
{B2C0EEF4-CCE5-4F55-934E-ABF60F3DCF56} IFMON.DLL winsock

netsh winsock>


Is there anything else that you guys need to help?
.

Relevant Pages

  • Re: Trouble connecting my 360 to my Media Center PC
    ... 10:17:41 PM: Verifying user is Administrator. ... 10:17:51 PM: Starting install. ... Media Center Edition 2005 Version 5.1.2710.2732.050805-1239) ... Per user Group Policy Restrictions for XP Home and XP Pro ...
    (microsoft.public.windows.mediacenter)
  • Re: Xbox media extender installation problem
    ... > I believe that I am having a very similar issue with my Media Center ... > 2:21:40 PM: Verifying Privacy Policy is present. ... > 2:22:26 PM: Waiting for security codes exchange status. ... I recently added a DSL connection to my network and have not ...
    (microsoft.public.windows.mediacenter)
  • Xbox 360 and Media Center Connectivity Problems
    ... see it listed as an update in "Add/Remove Programes" (trying to install ... connection via ethernet cable to another powerline adapter. ... Media center has been set up and works on the pc. ...
    (microsoft.public.windows.mediacenter)
  • Re: Networking help
    ... Windows XP Media Center ... Ethernet adapter Local Area Connection: ... 10:41:09 PM: Verifying Privacy Policy is present. ... 10:42:01 PM: Found a device matching the security code. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Networking help
    ... but here's the breakdown of my system>>Dell Dimension 9100> Windows XP Media Center ... >>Ethernet adapter Local Area Connection: ... >10:41:09 PM: Verifying Privacy Policy is present. ...
    (microsoft.public.windowsxp.network_web)
Loading