Re: A Disk Read Error Occured. Press CTRL+ALT+DEL to restart

Thanks, Good advice. Part of my question though is whether the problem is
even related to Windows, or whether it's a damaged MBR or whatever. I'd like
to revive the drive if possible, then back up the data like I should have
done in the first place. this is actually the second time that I've had a
similar problem on this drive in about 3 months. I am planning on replacing
it and using it only for data that I can afford to lose (like NOT my OS).
However, My knowledge is not deep enough to know whether I might be able to
revive this drive, which would make my plans a lot easier, or whether I need
to install it as a slave and buy some kind of 3rd party software to try to
get the data off of it, and possibly mess up the files in the process. If
there's some way to repair the MBR or whatever to get it going again, that's
my first choice.

"Dana Cline - MVP" wrote:

> I had something similar happen (but never to a Seagate). I eventually had to
> reinstall the OS. However, this install eventually went bad too - while a
> reformat can lock out bad sectors, if the disk is going bad, chances are it
> will continue to go bad.
>
> Fortunately, disks are pretty cheap these days. My suggestion would be to
> buy a new disk, install the OS on it, then connect up the bad disk and see
> if you can recover anything from it.
>
> When you partition that new disk, I'd also suggest you create a small drive
> (C:) for the OS, and partiton the rest (D:) as a place to put your data.
> That way if you ever have to reinstall the OS, your data may still be there
> in the separate partition.
>
> Dana Cline - MCE MVP
>
> "Lee Beck" <Lee Beck@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:735F5363-E86F-4414-B5F5-3BD0993BAE52@xxxxxxxxxxxxxxxx
> >I got this message a week or so ago and came here and did a search. The
> > respondents to other similar queries seemed to indicate that my hard drive
> > had gone bad (after checking that there was not a disk in the drive, etc.)
> > I
> > ran Seagate's HDD diagnostics and it says that the drive is okay. So this
> > leads me to probably a software problem (e.g., my XP Pro). I also ran a
> > software download called GetDataBack which allows you to see if there is
> > readable data on the HDD by installing it as a slave in an operating
> > computer. I can see my data. Also, Device Manager says that the drive is
> > operating normally, but clicking on the "Properties" tab shows no capacity
> > (0
> > GB used 0GB available).
> >
> > Before purchasing the GDB software and getting data back (but not
> > programs)
> > I'd like to try a few more tricks, since the next step after attempting to
> > get data off the drive is to reformat it and reinstall windows. I have a
> > few
> > questions:
> >
> > 1. Of course my first question is whether any of you computer experts can
> > lead me down a road to a solution. I'm at the point of doing whatever
> > might
> > work since my next steps will lose my data/programs anyway.
> >
> > 2 Is there any chance that performing a Windows utility might repair the
> > drive? I've already tried the "Repair" utility on the XP setup CD. It
> > found
> > some bad sectors and said that it repaired them, but I continue to get the
> > cited error message with every boot try. Maybe I have a damaged MBR? Is
> > there some way to check that out, or would that give a different error
> > message?
> > 3 Should I reinstall XP? At this point, the computer is not even getting
> > to
> > the OS. I get the message right after the BIOS screen.
> > 4 I have Norton SystemWorks and have kept my virus definitions up-to-date.
> > I did a virus check and no viruses were found. Is there a Norton utility
> > that will help?
> > 5 Would you recommend a data recovery utility other than GDB? The
> > software
> > costs $50 and seems a little squirly. Maybe it's because I'm using the
> > free
> > download that only checks data availability, but it freezes my machine
> > after
> > finding the data (the HDD continues to churn away using all available
> > system
> > memory).
> >
> > Any advice will be appreciated. Thanks.
> >
>
>
>
.

Relevant Pages

  • Re: changing hard drive
    ... Windows Product Activation... ... dropping files from one disk to the other will NOT transfer all the ... If you reinstall, the copy you have reinstalled won't know that its ... from the old installation to the new one. ...
    (alt.os.windows-xp)
  • Re: Reinstall. what with all those programs etc.
    ... made a disk image, but that wouldn't change a bit i think, because i'm ... necessary to reinstall Windows. ... Windows XP, and now Windows Vista, each for the period of time before ... do any real troubleshooting (a skill that most of them obviously don't ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Re Format xp2
    ... Disk. ... Just boot from the Windows XP CD (change the BIOS boot order if ... reinstall Windows. ... do any real troubleshooting (a skill that most of them obviously don't ...
    (microsoft.public.windowsxp.general)
  • Re: Re: Failure to Reinstall Windows XP
    ... information about the content of the Windows Reinstallation disk. ... about preparation and checking the hard disk and my XP problem was solved. ... the reinstall of XP on my Inspiron has only been partially ... The Autorun feature on the system disk failed to download the C:I386 ...
    (microsoft.public.windowsxp.general)
  • Re: WINXP+SP2 RUNS TOO SLOW
    ... 512MB of RAM or more is a decent Windows XP machine. ... clean and secure your Windows computer.. ... application, Disk copier, etc.) You'll be glad to know that if you have ... Why you should use a computer firewall.. ...
    (microsoft.public.windowsxp.perform_maintain)