Re: More than a month later, my Xbox 360 still won't connect to my

The services.msc list is sent.

I reviewed my eventvwr and didn't see anything out of the ordinary. Should
I be looking for a specific log?

"Jenelle Coberly [MSFT]" wrote:

> Gabriel,
> Please run services.msc once more and export the list of services
> currently running on your Media Center PC
>
> To export complete the following:
> - right click on services and select "Export List..."
> - save as a tab delimited text file
>
> email this text file to msft_mcx at hotmail for review
>
> Please also review your eventvwr messages logged at the time of install and
> report any messages you recieved.
>
> Thanks
>
> --
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
> "Gabriel" <Gabriel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:2BB86C2F-7D85-4F54-81B7-3A6E7F857AE7@xxxxxxxxxxxxxxxx
> >I turned the Windows Firewall off completely during the attempts.
> >
> > "Jenelle Coberly [MSFT]" wrote:
> >
> >> Gabriel,
> >>
> >> Please review the Windows Firewall settings and see if the option to
> >> "Don't
> >> allow exceptions" is currently enabled. If this is enabled please disable
> >> and attempt setup again.
> >>
> >> --
> >> This posting is provided "AS IS" with no warranties, and confers no
> >> rights.
> >>
> >>
> >> "Gabriel" <Gabriel@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> >> news:7AA5460F-E7AD-4F41-9765-FF4E23D07799@xxxxxxxxxxxxxxxx
> >> >- I only use Windows Firewall
> >> > - My only antivirus is NOD32, and I was not able to connect with NOD32
> >> > uninstalled.
> >> > - I do not have other third-party privacy, security center, or
> >> > intrusion
> >> > detection installed.
> >> > - I do not have an Nvidia motherboard chipset.
> >> > - SSDP and UPnP services are running.
> >> >
> >> > Connecting my Xbox 360 directly to my MCE PC and following your
> >> > directions
> >> > did not work.
> >> >
> >> > Contents of the new DvcConn.log:
> >> >
> >> > ***********************************************************
> >> > Wednesday, 11 January 2006 12:12:53
> >> > ***********************************************************
> >> > 12:12:53 PM : CmdLine: DvcConn launched from DvcSetup.
> >> >
> >> > 12:12:53 PM : Checking OS version.
> >> >
> >> > 12:12:53 PM : Checking MCE version.
> >> >
> >> > 12:12:53 PM : MCE version = Emerald.
> >> >
> >> > 12:12:53 PM : Checking only instance of installer.
> >> >
> >> > 12:12:53 PM : CmdLine: Connection Wizard.
> >> >
> >> > 12:12:53 PM : CmdLine: Security code passed in via cmdline: 8332-6080
> >> >
> >> > 12:12:53 PM : CmdLine: Skin = Xenon.
> >> >
> >> > 12:12:53 PM : CmdLine: Skipping Pre-Run Checks.
> >> >
> >> > 12:12:53 PM : Verifying user is Administrator.
> >> >
> >> > 12:12:53 PM : Verifying EULA is present.
> >> >
> >> > 12:12:53 PM : Verifying MCE is NOT installed on a dynamic disk.
> >> >
> >> > 12:12:54 PM : Start conditions met.
> >> >
> >> > 12:12:54 PM : Searching device table for unaffiliated bobsleds.
> >> >
> >> > 12:12:54 PM : Found 1 matching device(s).
> >> >
> >> > 12:12:54 PM : Found a device matching the security code. DVCID =
> >> > {00000000-0000-0000-0200-00125A4AA3C9}
> >> >
> >> > 12:12:55 PM : Sanity Check : Making sure device is not already
> >> > affiliated
> >> > with this PC.
> >> >
> >> > 12:12:56 PM : Starting affiliation.
> >> >
> >> > ***********************************************************
> >> > ERROR
> >> > ***********************************************************
> >> > Timed out waiting for affiliation status.
> >> >
> >> > 12:13:49 PM : Resetting the device table entry to a clean state.
> >> >
> >> > 12:13:49 PM : Clearing the device ID.
> >> >
> >> > 12:13:49 PM : Clearing the security code.
> >> >
> >> > 12:13:51 PM : Verifying security codes.
> >> >
> >> > 12:13:51 PM : Security Code: 8332-6080
> >> >
> >> > 12:13:51 PM : Searching device table for unaffiliated bobsleds.
> >> >
> >> > 12:13:51 PM : Found 1 matching device(s).
> >> >
> >> > 12:13:51 PM : Found a device matching the security code. DVCID =
> >> > {00000000-0000-0000-0200-00125A4AA3C9}
> >> >
> >> > 12:13:52 PM : Sanity Check : Making sure device is not already
> >> > affiliated
> >> > with this PC.
> >> >
> >> > 12:13:52 PM : Starting affiliation.
> >> >
> >> > ***********************************************************
> >> > ERROR
> >> > ***********************************************************
> >> > Timed out waiting for affiliation status.
> >> >
> >> > 12:15:28 PM : Cancel confirmed by user.
> >> >
> >> > 12:15:28 PM : Resetting the device table entry to a clean state.
> >> >
> >> > 12:15:28 PM : Turning off the InOOBE flag.
> >> >
> >> > 12:15:28 PM : Exiting
> >> >
> >> > Contents of the new DvcSetup.log:
> >> >
> >> > ***********************************************************
> >> > Wednesday, 11 January 2006 12:10:53
> >> > ***********************************************************
> >> > 12:10:52 PM : Checking OS version.
> >> >
> >> > 12:10:53 PM : Checking MCE version.
> >> >
> >> > 12:10:53 PM : MCE version = Emerald.
> >> >
> >> > 12:10:53 PM : Checking only instance of installer.
> >> >
> >> > 12:10:53 PM : CmdLine: Installing.
> >> >
> >> > 12:10:53 PM : CmdLine: Skin = Xenon.
> >> >
> >> > 12:10:53 PM : Verifying user is Administrator.
> >> >
> >> > 12:10:53 PM : Verifying EULA is present.
> >> >
> >> > 12:10:53 PM : Verifying MCE is NOT installed on a dynamic disk.
> >> >
> >> > 12:10:53 PM : Verifying OS is NOT Longhorn.
> >> >
> >> > 12:10:53 PM : Verifying MCE version.
> >> >
> >> > 12:10:53 PM : OS is Emerald : Verifying Sessions QFE is installed.
> >> >
> >> > 12:10:53 PM : Verifying NIC is present.
> >> >
> >> > 12:10:53 PM : Checking if Media Center First Run has been completed.
> >> >
> >> > 12:10:53 PM : Start conditions met.
> >> >
> >> > 12:10:53 PM : MCX Software is not installed
> >> >
> >> > 12:11:01 PM : Checking if tuners are in use.
> >> >
> >> > 12:11:04 PM : Detecting configured tuners...
> >> >
> >> > WARNING: No tuners found!
> >> >
> >> > 12:11:04 PM : No tuners in use: Skipping TunerWarning page.
> >> >
> >> > 12:11:04 PM : Loading EULA from:
> >> > c:\de3dd2c2859adfa07ce32b68e1c697\MCRDInstaller\..\Eula.txt
> >> >
> >> > 12:11:07 PM : Stopping MCRD service.
> >> >
> >> > 12:11:08 PM : Stopping QWAVE service.
> >> >
> >> > 12:11:08 PM : MCRD service has been stopped.
> >> >
> >> > 12:11:08 PM : Checking available disk space.
> >> >
> >> > 12:11:09 PM : Disk space verification succeeded.
> >> >
> >> > 12:11:09 PM : Starting install.
> >> >
> >> > 12:11:09 PM : Starting Emerald QFE install:
> >> > c:\de3dd2c2859adfa07ce32b68e1c697\MCRDInstaller\WindowsXPMediaCenter2005-kb905589.exe
> >> > /quiet /norestart
> >> >
> >> > 12:11:44 PM : Emerald QFE install succeeded: No reboot required.
> >> >
> >> > 12:11:44 PM : Starting MSIExec to do install: /I
> >> > "c:\de3dd2c2859adfa07ce32b68e1c697\MCRDInstaller\ehd.msi" /q /L*v+
> >> > "C:\WINDOWS\ehd_msi.log"
> >> >
> >> > 12:11:56 PM : MSI install succeeded: No reboot required.
> >> >
> >> > 12:11:56 PM : Starting the MCRD service.
> >> >
> >> > 12:11:58 PM : Updating TS Event Log.
> >> >
> >> > 12:11:58 PM : Enabling MultiSession.
> >> >
> >> > 12:11:58 PM : Setting the MAX supported bitrate to 6MB.
> >> >
> >> > 12:11:58 PM : Detecting configured tuners...
> >> >
> >> > WARNING: No tuners found!
> >> >
> >> > 12:11:58 PM : SetMaxBitRateLimit : 6000000
> >> >
> >> > 12:11:58 PM : MAX supported bitrate has been set to 6MB.
> >> >
> >> > 12:12:01 PM : Checking available disk space.
> >> >
> >> > 12:12:01 PM : Starting install.
> >> >
> >> > 12:12:01 PM : Starting WMC install: /quiet /norestart
> >> > /log:C:\WINDOWS\ehd_wmc.log
> >> >
> >> > 12:12:27 PM : WMC install succeeded: No reboot required.
> >> >
> >> > 12:12:27 PM : Turning on the InOOBE flag.
> >> >
> >> > 12:12:37 PM : Configuring Terminal Services policy.
> >> >
> >> > 12:12:37 PM : Configuring Security Event Log retention.
> >> >
> >> > 12:12:41 PM : Applying Default Settings.
> >> >
> >> > 12:12:41 PM : Enabling Remote Connections and Fast-User Switching.
> >> >
> >> > 12:12:41 PM : Opening ports in the Windows firewall.
> >> >
> >> > 12:12:41 PM : Creating MCRD users group.
> >> >
> >> > 12:12:43 PM : Enabling read/write access to user content for MCRD users
> >> > group.
> >> >
> >> > 12:12:46 PM : MCRD users group granted access to content.
> >> >
> >> > 12:12:46 PM : Saving Media Discovery folders.
> >> >
> >> > 12:12:46 PM : Media Discovery folders saved.
> >> >
> >> > 12:12:46 PM : Power management IS NOT enabled.
> >> >
> >> > 12:12:53 PM : Verifying security codes.
> >> >
> >> > 12:12:53 PM : Security Code: 8332-6080
> >> >
> >> > 12:12:53 PM : Launching Connection Wizard with cmdline: /skipchecks
> >> > /connectwiz /frominstall /SECURITYCODE:8332-6080 /SKIN:XENON
> >> >
> >> > 12:12:55 PM : Turning off the InOOBE flag.
> >> >
> >> > 12:12:55 PM : Exiting
> >> >
> >> > The exact error message desiplayed on my PC (the Xbox 360 does not show
> >> > an
> >> > error message):
> >> >
> >> > http://img.photobucket.com/albums/v84/Gobenmaru/8e8d0269.jpg
> >> >
> >> > The Xbox 360's IP: 192.168.1.44
> >> >
> >> > Results of ipconfig /all:
> >> >
> >> > Host Name . . . . . . . . . . . . : ender
> >> > Primary Dns Suffix . . . . . . . :
> >> > Node Type . . . . . . . . . . . . : Unknown
> >> > IP Routing Enabled. . . . . . . . : No
> >> > WINS Proxy Enabled. . . . . . . . : No
> >> > DNS Suffix Search List. . . . . . : myhome.westell.com
> >> >
> >> > Ethernet adapter Local Area Connection:
> >> >
> >> > Connection-specific DNS Suffix . : myhome.westell.com
> >> > Description . . . . . . . . . . . : Realtek RTL8169/8110 Family
> >> > Gigabit
> >> > Ethernet NIC
> >> > Physical Address. . . . . . . . . : 00-0C-76-E7-80-94
> >> > Dhcp Enabled. . . . . . . . . . . : Yes
> >> > Autoconfiguration Enabled . . . . : Yes
> >> > IP Address. . . . . . . . . . . . : 192.168.1.45
> >> > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> >> > Default Gateway . . . . . . . . . : 192.168.1.1
> >> > DHCP Server . . . . . . . . . . . : 192.168.1.1
> >> > DNS Servers . . . . . . . . . . . : 192.168.1.1
.

Relevant Pages

  • Re: More than a month later, my Xbox 360 still wont connect to my
    ... email this text file to msft_mcx at hotmail for review ... >> Gabriel, ... >>> Timed out waiting for affiliation status. ...
    (microsoft.public.windows.mediacenter)
  • Re: Belkin not-real-firewall?
    ... Belkin) and watch traffic coming to and leaving the router as someone can hack your wireless network and be all over the top of your machines wired or wireless or they can use your wireless to attack other networks or machines on the Internet. ... I tried Wallwatcher and thought the graphs etc. were pretty cool, but not something I'd find time to review on a regular basis. ... I run Syslog Daemon because the daily summary email takes 30 seconds to review for anomalies - no need to look any deeper most days. ... Windows Firewall only distracts me if I turn it off, ...
    (comp.security.firewalls)
  • Re: Belkin not-real-firewall?
    ... Belkin) to review the syslog or Syslog Daemon and watch traffic coming to and leaving the router as someone can hack your wireless network and be all over the top of your machines wired or wireless or they can use your wireless to attack other networks or machines on the Internet. ... Windows Firewall only distracts me if I turn it off, ... That doesn't make any sense as the Windows FW is a personal FW, unless you're talking Application Control in PFW solutions and its nuisance asking of questions to allow or not to allow something, then you're making sense. ...
    (comp.security.firewalls)
Loading