Re: Media Center Extender gives error code 2003

Dynamic drives usually cause issues, but I wouldn't expect this specific
behavior. Please copy-paste the contents of your DvcConn.log and
DvcSetup.log files from c:\windows. Also, have you tried uninstalling and
reinstalling the PC-side Extender software in conjunction with resetting
your Extender? (instructions for resetting your Extender are here:
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=1891)

--
This posting is provided "AS IS" with no warranties, and confers no rights.


"Harold" <Harold@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2E4CFD3C-6852-43E3-8B4D-4C512C38967C@xxxxxxxxxxxxxxxx
> One more point, I have 2nd harddrive in computer which is a dynamic drive
(it
> only contains data, no operating system files and has its own drive
letter).
> Since I know that dynamic drives can cause problems, I disconnected the
drive
> but still the same problem. Can this still have anything to do with my
> dynamic drive? Is there anything else I need to do to get around the
dynamic
> drive problem? The dynamic drive disappeared from the disk manager after
I
> disconnected it. It seemed to me that this would have solved any dynamic
> drive problem if there would have been one...
>
> Correct?
>
> "Harold" wrote:
>
> > I recently bought a media center extender, but I can get it to work with
my
> > HP computer.
> >
> > Going through the setup everything seems to go fine until it tries to
verify
> > the "security ". At that point the media center extender shows a
"general
> > failure" with the "error code 2003" and reboots.
> >
> > Looking at the event log on the media center computer, I get the
following
> > messages:
> >
> > AffConfirm RQ- Device {00000000-0000-0010-8000-000f66fe10df} -
successfully
> > affiliated
> >
> > ERROR: KeyExch RQ3 Device {00000000-0000-0010-8000-000f66fe10df}- There
was
> > an error processing this request. Error code 0x80004005
> >
> > I switched all my firewalls off, I tired wired connection, a wireless
> > connection, a different router, I even tried a direct x-over cable
between
> > the PC and the extender to make sure the hub was not interfering, but no
> > success. It keeps giving me this error message.
> >
> > Any suggestions??
> >
> > Thanks
> >


.