Re: Linksys MCE - Error Code: 00110003
- From: "Doug Knox MS-MVP" <dknox@xxxxxxxx>
- Date: Mon, 2 Jan 2006 13:10:17 -0500
Hi Jukka,
If the computer is automatically logging on, you can correct this by going to Start, Run and entering CONTROL USERPASSWORDS2. On the General tab, check the box users must enter a username and password.
For the RDP behavior that you're seeing, this is normal for a standard user account. Only one normal user can be active on the machine at a time. Extender devices use their own accounts, and they are treated differently so they can be logged on, while there is still an active user at the console.
Try Jason's advice of using the newer software for the XBox 360 and its Extender functionality.
--
Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart Display\Security
Win 95/98/Me/XP Tweaks and Fixes
http://www.dougknox.com
--------------------------------
Per user Group Policy Restrictions for XP Home and XP Pro
http://www.dougknox.com/xp/utils/xp_securityconsole.htm
--------------------------------
Please reply only to the newsgroup so all may benefit.
Unsolicited e-mail is not answered.
"Jukka" <Jukka@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:B2013FB2-840B-46E2-B1FF-120FF3B51792@xxxxxxxxxxxxxxxx
> Hi,
>
> Thanks for the leads. Here are some additional details:
>
> Netware is not installed and does not show up under any of the networks
> (local, wireless, or 1394. UPnP is not an issue, right?
>
> It seems that HP has done something with the welcome screen as the machine
> autologins when it is booted up. However, I can go back to it by either
> logging off or using fast user switching. In other words, it is probably only
> the autologin setting somewhere.
>
> In addition, I can login remotely from another PC on remote desktop -- but
> the thing I don't quite get is that when I log in using RDP, the session that
> was on is disconnected from the console. Even if the user IDs are different.
> More specifically, if I'm logged on the computer as HP_Administrator
> (default, automatic) and log on remotely as Jukka, the HP_Administrator is
> disconnected. Could this be something?
>
> As for the other reply you gave, no, for that specific question I don't
> think so. There is a ton (and I mean ton) of extra stuff that HP just puts on
> the image, but they are mostly games, image and audio utilities and stuff
> like that and none of them should hamper with the logon and the logon screen
> is the normal Windows Welcome up to my best understanding. No other remote
> connection things installed except for the Windows' own Remote
> Connections/assistance.
>
> Thanks for additional hints and pointers.
>
> JP
>
> "Doug Knox MS-MVP" wrote:
>
>> Jukka,
>>
>> Do you have Client Services for Netware installed? You can check this by right clicking My Network Places, Properties. Then right clicking your network connection and selecting Properties. On the General tab, you'll see This connection uses the following............ If Client Services for Netware is installed, this can break the Media Center connection. If it is installed highlight it and click Uninstall.
>>
>> --
>> Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart Display\Security
>> Win 95/98/Me/XP Tweaks and Fixes
>> http://www.dougknox.com
>> --------------------------------
>> Per user Group Policy Restrictions for XP Home and XP Pro
>> http://www.dougknox.com/xp/utils/xp_securityconsole.htm
>> --------------------------------
>> Please reply only to the newsgroup so all may benefit.
>> Unsolicited e-mail is not answered.
>>
>> "Jukka" <Jukka@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:D5B36B22-F686-419B-B679-17734157137F@xxxxxxxxxxxxxxxx
>> > Hi all,
>> >
>> > I'm having a similar issue but can't fix it.
>> >
>> > Here are the details:
>> >
>> > HP Media Center PC, 1 month old, MCE 2005 with SP2
>> > Media Center Extender for XBOX (the original, not 360)
>> >
>> > Symptoms: XBOX: "There is problem with Microsoft Product Activation on the
>> > Media Center PC".
>> > PC: Event 5700 (TermService): System validation failed.
>> >
>> > I have two hard drives, one original with two primary NTFS partitions, one
>> > added with one NTFS primary partition. Uninstalling the second disk,
>> > uninstalling, cleaning & reinstalling will not affect the situation.
>> >
>> > I'm not running anti spyware (unless it lurks in the background). I
>> > uninstalled the Norton stuff that came with the PC and use Trend Micro
>> > instead.
>> >
>> > The UpperFilters shows PartMgr.
>> >
>> > Looking under HKLM\software\microsoft\windows\currentversion\Media
>> > Center\ident I see 4.0. Tried even tweaking this to 3.1 and reinstalling with
>> > no success.
>> >
>> > Can you give me ideas what else could be wrong? Reinstalling the entire
>> > system is not on the top of my list becuse the recovery media just contains
>> > the ton of useless stuff that HP decided to put on my machine + would be
>> > tremendous effort. I would love to get this to work...
>> >
>> > JP
>> >
>> > "Doug Knox MS-MVP" wrote:
>> >
>> >> Click Start, Run and enter REGEDIT Go to:
>> >>
>> >> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center
>> >>
>> >> Look in the right pane for the value called "Ident". Is it at least 3.0? If you have a base MCE 2005 system it should read 3.0. For a system with Update Rollup 1 it should be 3.1.
>> >>
>> >> --
>> >> Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart Display\Security
>> >> Win 95/98/Me/XP Tweaks and Fixes
>> >> http://www.dougknox.com
>> >> --------------------------------
>> >> Per user Group Policy Restrictions for XP Home and XP Pro
>> >> http://www.dougknox.com/xp/utils/xp_securityconsole.htm
>> >> --------------------------------
>> >> Please reply only to the newsgroup so all may benefit.
>> >> Unsolicited e-mail is not answered.
>> >>
>> >> "TRoesler" <TRoesler@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:16327A12-50A8-451C-8B2C-658482DE45D0@xxxxxxxxxxxxxxxx
>> >> >I have the following HDD's configured:
>> >> > - C: = 36GB (NTFS - Basic)
>> >> > - D: = 160GB (NTFS - Basic) (2 discs in h/w raid-1)
>> >> >
>> >> >
>> >> > "Doug Knox MS-MVP" wrote:
>> >> >
>> >> >> Are your partitions all NTFS, or is one or more FAT32? Another user had a similar problem that was caused by adding a 5th hard disk with a primary and multiple logical partitions:
>> >> >>
>> >> >> http://forums.techarena.in/showthread.php?t=92193
>> >> >>
>> >> >> Problem solved by putting the hard drives back in original postitions and
>> >> >> just creating logical partitions on the new hard drive.
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart Display\Security
>> >> >> Win 95/98/Me/XP Tweaks and Fixes
>> >> >> http://www.dougknox.com
>> >> >> --------------------------------
>> >> >> Per user Group Policy Restrictions for XP Home and XP Pro
>> >> >> http://www.dougknox.com/xp/utils/xp_securityconsole.htm
>> >> >> --------------------------------
>> >> >> Please reply only to the newsgroup so all may benefit.
>> >> >> Unsolicited e-mail is not answered.
>> >> >>
>> >> >> "TRoesler" <TRoesler@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:16D64305-E40B-4132-9D16-59810237C0CC@xxxxxxxxxxxxxxxx
>> >> >> > No - I don't believe I have the AntiSpyware Beta installed (at least I don't
>> >> >> > see it in Add/Remove programs, etc.).
>> >> >> > I also already have "PartMgr" in the registry value you referenced.
>> >> >> >
>> >> >> >
>> >> >> > "Doug Knox MS-MVP" wrote:
>> >> >> >
>> >> >> >> Do you have the Microsoft AntiSpyware Beta installed? If so, this has a known incompatibility with the Extender devices.
>> >> >> >>
>> >> >> >> Alternatively, click Start, Run and enter REGEDIT Go to:
>> >> >> >>
>> >> >> >> HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318}
>> >> >> >>
>> >> >> >> Note the 4D36E967 portion......... Look in the right pane for a value called UpperFilters. This is a REG_MULTI_SZ type and on my system reads PartMgr. Does yours read the same? If not, right click the {4D36E967-E325-11CE-BFC1-08002BE10318} and select Export. This creates a backup REG file that can be re-imported by double clicking it. Now double click the UpperFilters value and change it to read PartMgr. Now try to reconnect with the Extender. A reboot should not be necessary, but you never know. If you have multiple entries in the UpperFilters value, post back before you make any changes.
>> >> >> >>
>> >> >> >> --
>> >> >> >> Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart Display\Security
>> >> >> >> Win 95/98/Me/XP Tweaks and Fixes
>> >> >> >> http://www.dougknox.com
>> >> >> >> --------------------------------
>> >> >> >> Per user Group Policy Restrictions for XP Home and XP Pro
>> >> >> >> http://www.dougknox.com/xp/utils/xp_securityconsole.htm
>> >> >> >> --------------------------------
>> >> >> >> Please reply only to the newsgroup so all may benefit.
>> >> >> >> Unsolicited e-mail is not answered.
>> >> >> >>
>> >> >> >> "TRoesler" <TRoesler@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:F37878E5-2983-4DE4-B6E5-F3AD2151B391@xxxxxxxxxxxxxxxx
>> >> >> >> >I recently resoftwared my PC and applied all of the updates.
>> >> >> >> > I am now having problems getting my Linksys Media Center Extender to work
>> >> >> >> > properly. I am receiving the following error in my System log:
>> >> >> >> >
>> >> >> >> > Event Type: Error
>> >> >> >> > Event Source: TermService
>> >> >> >> > Event Category: None
>> >> >> >> > Event ID: 5700
>> >> >> >> > Date: 10/4/2005
>> >> >> >> > Time: 11:44:31 AM
>> >> >> >> > User: N/A
>> >> >> >> > Computer: DP-TROE1-CGY
>> >> >> >> > Description:Remote Media Center session was logged off because system
>> >> >> >> > validation failed.
>> >> >> >> >
>> >> >> >> > I've done some searching on this issue and have tried disabling my antivirus
>> >> >> >> > (SAV coporate v10) and FW/VPN. Nothing seems to resolve the issue.
>> >> >> >> >
>> >> >> >> > Additionally, prior to this, I had to manually change my "Ident Tag" from
>> >> >> >> > 2.8 to 3.0 in order to get the Update Rollup 1 and the Linksys Extender
>> >> >> >> > software CD to run (this was with SP2 and all other updates already applied
>> >> >> >> > to the system).
>> >> >> >> >
>> >> >> >> > Any help on this would be greatly appreciated.
>> >> >> >>
>> >> >>
>> >>
>>
.
- References:
- Re: Linksys MCE - Error Code: 00110003
- From: Jukka
- Re: Linksys MCE - Error Code: 00110003
- From: Doug Knox MS-MVP
- Re: Linksys MCE - Error Code: 00110003
- From: Jukka
- Re: Linksys MCE - Error Code: 00110003
- Prev by Date: Re: Video Playback hangs with ATI All-In-Wonder X600Pro
- Next by Date: Re: Dual Tuner w/ Digital Cable Set Top Box
- Previous by thread: Re: Linksys MCE - Error Code: 00110003
- Next by thread: Re: Linksys MCE - Error Code: 00110003
- Index(es):
Relevant Pages
|
