Re: Help - Problems Installing

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



Thanks for your quick help Richard.

The problem is that I have done that twice but doesn't seem to solve the
problem because when I install the updates it crashes again..

Going mad. I will be able to return the Operative System to the supplier,
but it feels rather frustating. On other machine I have I run Pinnacle
ShowCenter and never had a problem. I was looking forward to get the nex X360
but now I dont know anymore.


--
Cheers
Pirata


"Richard Wagstaff" wrote:

> I had the same problem.
>
> When the install asks for the SP2 CD, it's really asking you for Media
> Centre CD1.
>
> I wonder if it would be quicker to wipe the disk and re-install?
>
> Richard
>
>
> "Pirata" <Pirata@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:3675C73C-0358-4283-90F6-C76CE9E57B54@xxxxxxxxxxxxxxxx
> >I recently built a PC with the following configuration
> >
> > Motherboard: Abit KN8 nForce4 4DDR-DIMM
> > CPU: AMD Athlon 64 Venice 3500 2.2GHz
> > Ram: Kingston 1Gb
> > Hard Disk: Maxtor 300GB
> > Graphic Card: Hightech Excalibur ATI Radeon X550
> >
> > As Operative System I purchased Windows XP Media Center Edition 2005
> >
> > Please bear with me;
> >
> > The supplier delivered 4 CD's, Media Center CD 1 and CD 2, plus a CD which
> > is labelled "Updates f/ Version 2005" and finally a CD labelled
> > "Lokaliseringspaket för Windows XP Media Center Edition (svenska), the
> > translation would be "localization packet for..."
> >
> > Now, during the first installation, the system asked me to insert the SP2
> > CD, which I did not have, however I clicked cancel and he carried on
> > installing. I thought I will set for Automatic Updates afterwords, which I
> > did.
> >
> > Everything went ok, and the system even did the above mentioned updates
> > afterwords. However, when I tried to installed the CD with the updates, it
> > asked me for Net Framework 1.1 SP1. Again did not had that, went to the
> > site
> > and downloaded it, and after that the system crashed for the 1st time. Not
> > only freezed, but actually switched itself off.
> >
> > Before the crash, whilst I was joining my home network, I noticed that on
> > the Control Panel / System, it showed Media Center Edition Version 2002
> > Service Pack 2, which I thought to be strange taking into account that the
> > CD's are labelled 2005. Is this normal???
> >
> > Furthermore, I tried to repair the installation, but did not succeeded
> > fully. Formated the disk again and reinstalled it again. The same
> > procedure
> > as describe above, but now the system says it needs a file on folder I386.
> > I
> > explored the CD2 and realized that there is a folder called I386 in there,
> > however, that doesn't seem to solve the problem.
> >
> > After downloading the Updates as well as NET Framework 1.1 SP1, the system
> > does not work any longer and I can only go in in Safe mode. It gives me
> > the
> > following message.
> >
> > "C:\Windows\system32\KBDus.dll is not a valid Windows Image"
> >
> > Well, that about it, please feel free to ask if you require any further
> > info.
> >
> > Please send me some tips
> >
> > Thanks in advance
> > --
> > Cheers
> > Pirata
>
>
>
.



Relevant Pages

  • Re: boot sector f*ed
    ... "I updated the machine and it doesn't boot anymore". ... Please capture the output from running fdisk and bsdlabel on the problem disk ... Soft updates is a technique employed by the filesystem to ensure that the file ... application to install the 64bit FBSD with flashplugin on the portable ...
    (freebsd-questions)
  • Re: Vista SP-1 screwed up all my audio
    ... scanned the hard disk for errors-zero found. ... revert back to pre-SP-1 updates? ... Windows Vista SP1 is not one of those exceptions. ... Learn how to install Windows Vista Service Pack 1 ...
    (microsoft.public.windowsupdate)
  • Re: KB898458???
    ... Reformatted HD and tried to load Winxp by way of 3x QuickRestore disk. ... Immediately install SP2: ... Make certain Automatic Updates is enabled. ...
    (microsoft.public.windowsxp.general)
  • Re: 800703E7 error message
    ... I get this message when trying to install service pack 2. ... > Check for hardware driver updates? ... > Patches and Updates! ... > drivers for your hardware/operating system. ...
    (microsoft.public.windowsupdate)
  • Re: KB898458???
    ... Reformatted HD and tried to load Winxp by way of 3x QuickRestore disk. ... Immediately install SP2: ... Make certain Automatic Updates is enabled. ...
    (microsoft.public.windowsxp.general)