Re: Capturing video from a DV camcorder
- From: "ranri" <ranri@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 12 Aug 2005 23:07:02 -0700
it seems to me I have the same problem.
two days I am thinking on it.
and reason, I suppose, is in Media Center.
look at that:
http://support.microsoft.com/default.aspx?scid=kb%3Ben-us%3B827542&SD=SONY
may be it helps in your situation.
I tryed to do that and achieve succsess. but ONLY ONCE!
another time I repeat that actions, I can't capture from my camcorder
again :(
I think it's better to find way to turn off Media Center at all.
"J" wrote:
> Thanks for the reply. When I say "Play" mode, I mean the setting, not the
> play button. When I click "Start Capture" on the screen, it starts up my DV
> camcorder. The problem is that nothing gets captured. My camera is playing
> the tape, but nothing is recorded on the computer's end.
>
> Yes, I've tried to play back anything that might have been recorded through
> Studio, but there is nothing present.
>
> Thanks.
>
> "Jaime" wrote:
>
> > Have you just used the "Capture" command in Pinnacle to initial the process?
> > Normally, you don't need to push the "Play" button on the camcorder, the
> > software should be controlling the camera through the firewire, you
> > shouldn't need to touch the camera for FF, REW, Play, etc. It may have
> > nothing to do with it, but worth a shot to try if you haven't already.
> >
> > I have used Pinnacle since v7 with my DV camera (Sony) and I use it on my PC
> > with XP Pro SP2 and have never experience any problems; I have not loaded it
> > onto my MCE system (although, I would think it would work the same as on XP
> > Pro).
> >
> > BTW, although the screen is black, do you still get anything captured if you
> > hit "Play" and runt the capture process run for a while?
> > --
> > James
> > Orlando (Goofy says "Hey!"), Florida
> >
> > "J" <hensonjw@xxxxxxxxxxxxxx(donotspam)> wrote in message
> > news:C9521FC0-C75D-48A1-A42E-A686D0B93F03@xxxxxxxxxxxxxxxx
> > > Yes. I have a Belkin brand firewire connected to an Adaptec PCI card. I
> > > checked, but there is no specific driver for the card. Windows just
> > > automatically used its generic driver for the PCI card. I know these
> > > hardware items are working, though, because the computer recognizes video
> > > when I set the camcorder to "record" mode and take off the lens cap.
> > > Unfortunately, when I switch the camera to play mode in order to capture
> > > video off the tape, everything goes blank. I'm leaning towards a software
> > > issue that is possibly causing this malfunction. Like I mentioned in my
> > > first post, I wonder if the service pack 2 is interferring at all with my
> > > capture capabilities. Maybe switching to service pack 1 would help?
> > >
> > > Thanks. Looking forward to your reply.
> > >
> > > J
> > >
> > > "Cari (MS-MVP)" wrote:
> > >
> > >> If it's a DV camcorder, are you using firewire to connect the camcorder
> > >> to
> > >> the PC?
> > >> --
> > >> Cari (MS-MVP)
> > >> Printing & Imaging
> > >>
> > >>
> > >>
> > >>
> >
> >
> >
.
- References:
- Capturing video from a DV camcorder
- From: J
- Re: Capturing video from a DV camcorder
- From: Cari \(MS-MVP\)
- Re: Capturing video from a DV camcorder
- From: J
- Re: Capturing video from a DV camcorder
- From: Jaime
- Re: Capturing video from a DV camcorder
- From: J
- Capturing video from a DV camcorder
- Prev by Date: Which MCE edition do I have?
- Next by Date: Re: Dual TV card system: Which TV card is playing???
- Previous by thread: Re: Capturing video from a DV camcorder
- Next by thread: RE: DVD create failure
- Index(es):
Relevant Pages
|
