Re: Dolby Digital 5.1

I see. I have no coaxial. I'm going to have to invest in some different
audio hardware. My DD 5.1 receiver is about six years old.

Thanks for your help.

--
Michael Earls
The Cerebral Kitchen
http://www.cerkit.com/


"Stu" <sheodi@please dont spam me.cogeco.ca> wrote in message
news:uiSux3ahFHA.3448@xxxxxxxxxxxxxxxxxxxxxxx
> Hi Michael,
>
> Yes - the Nvidia decoder is at this moment, passing the untouched digital
> signal from a DVD to my Kenwood DD6.1/DTS6.1 Receiver. Works flawlessly.
> But, I had to buy a small 1/8 jack to RCA Adapter to hook the digital
> output from my Audigy 2 to an available coaxial input on my receiver.
> Available at any Radio Shack.
>
> Stu
>
>
> "Michael Earls" <mearls@xxxxxxxxxxx> wrote in message
> news:OzwU5nZhFHA.272@xxxxxxxxxxxxxxxxxxxxxxx
>> Ok, so I didn't read it right. How did that answer my question?
>>
>> I also own the retail version of their DVD decoder. Before I go out and
>> buy a bunch of hardware, I want to make sure that it's possible to get
>> the optical output to my receiver when I play a DVD.
>>
>> --
>> Michael Earls
>> The Cerebral Kitchen
>> http://www.cerkit.com/
>>
>>
>> "Robert Schlabbach" <robert_s@xxxxxxx> wrote in message
>> news:ujEzCHZhFHA.1460@xxxxxxxxxxxxxxxxxxxxxxx
>>> "Michael Earls" <mearls@xxxxxxxxxxx> wrote in message
>>> news:uqOXtpUhFHA.1244@xxxxxxxxxxxxxxxxxxxxxxx
>>>> I downloaded the 60 day trial of the nVidia DVD decoder, and on the
>>>> configuration screen, it tells me that it will downgrade the signal.
>>>
>>> You didn't read it right. It clearly says:
>>>
>>> | S/PDIF pass through for external decoding of Dolby Digital and DTS
>>> | (compatible hardware required)
>>>
>>> Regards,«
>>> --
>>> Robert Schlabbach
>>> e-mail: robert_s@xxxxxxx
>>> Berlin, Germany
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: DVD-Recorder mit DVB-T?
    ... Zeit die in's zusammensuchen der Hardware gesteckt haben. ... nicht immer beides programmieren muss (sondern nur den Receiver ... Im Prinzip will man ja vor dem Ueberspielen auf DVD evtl. ... der kann ja auch kurz die Platte ...
    (de.rec.tv.technik)
  • Re: Dolby Digital 5.1
    ... I searched the web to see if SPDIF!= PCM, ... > signal from a DVD to my Kenwood DD6.1/DTS6.1 Receiver. ... >> Michael Earls ...
    (microsoft.public.windows.mediacenter)
  • Re: ADT and SSC speed increase, need help!
    ... The 57,600 bps is the rate at which the hardware transfers data. ... IIgs' serial hardware can handle that speed. ... IIc is a little off of the standard so at higher speeds the receiver ...
    (comp.sys.apple2.programmer)
  • Re: confusion about path loss calculation for zigbee
    ... A question you need to ask is what's the receiver bandwidth. ... Particularly if you have a system that supports multiple rates, and you want a single hardware design without adjustable bandwidth, your hardware has to support the widest band. ... confusion that Omar suffers, is that advice already posted in ...
    (rec.radio.amateur.antenna)
  • Oops! Correct link for adapter below:
    ... Stu ... My DD 5.1 receiver is about six years old. ... >> signal from a DVD to my Kenwood DD6.1/DTS6.1 Receiver. ... >>> Michael Earls ...
    (microsoft.public.windows.mediacenter)