Re: Using Satellite with Guide
- From: RDB <RDB@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 16 Jun 2005 14:04:04 -0700
HI.. I just got a new DISH system with dual tuner 322. It goes to "sleep"
and I cannot figure out a way to have my Sony Vaio Media computer wake it up.
So for now I have to program an auto tune in on the DIsh system to occur
before the recording time.. Hopefully there will be an update in Media
software to take care of this. in the setup procedure????
RDB
"mgg" wrote:
> My setup works beautifully with Dish. Have you gone thru the setup with the
> MCE remote? You need the IR emitter on the STB for MCE to be able to change
> channels correctly.
>
> --Mike
>
> "skateastron" <skateastron@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:B4C26A0C-9E2C-44DB-A1EA-9B9C5DFC21CA@xxxxxxxxxxxxxxxx
> >I have just recently purchased a 2005 MCE computer and I am using Dish
> > satellite with, however I am having problems getting the auto record
> > feature
> > to work, I have also been able to change the channel using the guide. For
> > example if i click on the program in the guide that i wish to watch it
> > does
> > not switch i have to manually change the channel using the satellite
> > remote
> > pointed at the box top to change the channel thus if i set the series
> > record
> > and it is not already on the proper channel it will not automatically
> > change.
> > Is there any way to correct this problem or is it just an inherent flaw.
> > As i
> > know that the program will work beautifully that way with cable or
> > antenna.
> > Any help would be greatly appreciated.
>
>
>
.
- References:
- Using Satellite with Guide
- From: skateastron
- Re: Using Satellite with Guide
- From: mgg
- Using Satellite with Guide
- Prev by Date: Re: Todd...(Previous Restricted Content Thread)...
- Next by Date: Copy DVDs
- Previous by thread: Re: Using Satellite with Guide
- Next by thread: sharing folder
- Index(es):
Relevant Pages
|
