Re: Still jerky video.. Tips needed..
- From: "Cageman" <Cageman@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 3 Jun 2005 02:06:01 -0700
Hi Todd !
Thanks again for your input ; sorry for starting a new thread..
To answer your questions and provide some information :
About the tuner :
- The tuner is a Hauppauge WinTV PVR500MCE Dual Tuner. I am using the driver
included in the latest download from hauppauge : MCE_CD_v25.zip.
- I will copy a recorded TV show from one of my colleagues and try this asap.
About the network :
- The card is a 10/100/1000 integrated network card on the motherboard. It
is a Marvell Yukon. I am using the latest driver available directly from
Marvell. I also tried using a Compaq NIC (NC3120), but to no avail. My
network is 100Mb.
- The MCX Network Performance Tuner reports i have sufficient bandwidth to
run the extender. The graph is displays is entirely green (so maximum
bandwidth is available). Monitoring network performance while the extender is
running gives a network load of about 10-15%.
- Recording a TV show in fair quality does not make a difference : It just
gives a jerky playback of a lesser quality recording :-)
I also tuned the PC so no more IRQ's are shared anymore : USB is disabled,
as are all the serial and parallel ports. I moved PCI cards around to trigger
ACPI to assign non-shared irqs.. No difference.. BIOS is latest version,
default configuration.
I cannot stand the fact that i cannot find out what component is causing the
problem. I am very much hoping to find out with your help though, Todd..!
Thanks.
"Todd Bowra [MSFT]" wrote:
> Summarizing from your results in the other thread:
> - MPEG file content plays fine on MCX
> - TV content is jerky when played on MCX
>
> I can think of a couple potential causes:
> 1) The TV stream being created by your TV tuner is a little wacky
> 2) Your PC's network card is not happy about sending higher bit-rate content
> across the network (it's likely that the MPEG file you played was lower
> bit-rate than TV content)
>
> Next steps related to item 1:
> - What TV tuner card do you have in your PC? Are you running the latest
> released driver for it?
> - Do you have a friend with a Media Center PC? If so, could you copy a TV
> show from that friend and try playing it on your MCX?
>
> Next steps related to item 2:
> - What Ethernet tuner card do you have in your PC? Are you running the
> latest released driver for it?
> - If you run the MCX Network Performance Tuner (Start --> All Programs -->
> Accessories --> Media Center --> Media Center Extender Network Performance
> Tuner), does it tell you that you have sufficient network bandwidth?
> - If you record a TV show at Fair quality, does it playback okay on your
> MCX?
>
> --
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
> "JW" <anonymous@xxxxxxxxxx> wrote in message
> news:eVvGNy6ZFHA.1456@xxxxxxxxxxxxxxxxxxxxxxx
> > I do not have any other suggestions. Hopefully Todd will chip in on this
> > thread since he is a real expert on extender problems.
> >
> > "Cageman" <Cageman@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:CED5C246-0A0C-4D9A-83FA-CEC27D0F27FD@xxxxxxxxxxxxxxxx
> > >I am using the Linksys WMCE54AG Extender. I applied all updates (rollup 1
> > >for
> > > media center + linksysv101 firmware); also all available updates on the
> > > Windows Update site. I am using Windows Media Center 2005, btw.
> > >
> > >
> > > "JW" wrote:
> > >
> > >> What model Extender do you have? and have you downloaded the updates
> for
> > >> that model from the MS download site that were released last winter?
> > >>
> > >> "Cageman" <Cageman@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > >> news:94FA5691-28D1-4F60-B654-BF39F8F749F1@xxxxxxxxxxxxxxxx
> > >> > Hi,
> > >> >
> > >> > I am still having problems with jerky video playback of recorded and
> > >> > live
> > >> > TV
> > >> > on my Linksys Media Center extender.
> > >> >
> > >> > In short :
> > >> >
> > >> > - Live/Recorded TV runs smooth on my Media Center PC directly
> connected
> > >> > to
> > >> > a
> > >> > TV
> > >> > - Live/Recorded TV runs jerky (pauses 3 times a second) on the Media
> > >> > Center
> > >> > Extender
> > >> > - standard MPEG movies play smooth on both the Media Center PC and
> the
> > >> > Media
> > >> > Center Extender.
> > >> >
> > >> > My setup :
> > >> >
> > >> > P4 3.0Ghz HT, NVIDIA Geforce 5200 128Mb AGP, IBM 120Gb ATA 7200RPM,
> > >> > 1.5Gb
> > >> > RAM, Hauppauge PVR 500MCE Dual Tuner Card, ASUS p5p800 MoBo.
> > >> >
> > >> > Any help would be greatly appreciated !
> > >> >
> > >> > Thanks.
> > >> >
> > >> >
> > >> >
> > >>
> > >>
> > >>
> >
> >
>
>
>
.
- Follow-Ups:
- Re: Still jerky video.. Tips needed..
- From: Todd Bowra [MSFT]
- Re: Still jerky video.. Tips needed..
- References:
- Still jerky video.. Tips needed..
- From: Cageman
- Re: Still jerky video.. Tips needed..
- From: JW
- Re: Still jerky video.. Tips needed..
- From: Cageman
- Re: Still jerky video.. Tips needed..
- From: JW
- Re: Still jerky video.. Tips needed..
- From: Todd Bowra [MSFT]
- Still jerky video.. Tips needed..
- Prev by Date: Re: Hard Disk Thrashing
- Next by Date: Remote control buttons not working - keyboard conflict
- Previous by thread: Re: Still jerky video.. Tips needed..
- Next by thread: Re: Still jerky video.. Tips needed..
- Index(es):