Re: no "network setup" on my xbox?? to set up my D-Link

From: Barb Bowman [MVP-Windows] (barb_at_nospam.com)
Date: 03/26/05 

Date: Sat, 26 Mar 2005 05:54:12 -0500

why does the router have a new static IP? you should not have to
change a thing on the router. you give the 3420 a static IP.

what is the IP of your router?
what IPs do your computers get via DHCP?
what is the IP you set the 3420 to?

On Fri, 25 Mar 2005 16:07:02 -0800, Jonathan.
<Jonathan@discussions.microsoft.com> wrote:

>that's what I was saying. I changed it(my computer) to "obtain IP
>automatically" after I had made it static to change the 3420. That's what I
>was saying.
>
>I did all of that. the router now has a new static IP. My computer now is
>set to a not static IP. I turned off all of the WPA security (temporarily)
>just to see if I can get it to connect.
>
>Didn't mess with the encryption... but I have it disabled for now (and I
>disabled the router's security - WPA as well).
>
>I did then connect my computer directly to the 3420 (with obtain IP on for
>the computer not the 3420) and did restart. That is what I was saying. I
>did all of that and I still didn't get a connection. And I wasn't able to go
>to the 3420 administration.
>
>
>That is why I wrote, because I did all of those things and it still didn't
>connect like I thought it should. Which is why I'm loosing hair.
>"Barb Bowman [MVP-Windows]" wrote:
>
>> You changed WHAT to get an automatic IP?
>> The 3420 - ?
>>
>> Set THAT to a static. Use a computer set up with a static IP that is
>> wired and NOT CONNECTED TO YOUR ROUTER WHILE YOU DO THIS.
>>
>> You should be using WPA PSK/Personal on your router, your PC's and on
>> the DLG-3420.
>>
>> You should be able to find your wireless router from the admin pages
>> on the 3420? Can you? Did you configure the encryption?
>>
>> Once you do that. Remove the static IP on your computer, NOT the 3420.
>> Reboot the computer. The 3420 should now let you browse the web.
>>
>> On Fri, 25 Mar 2005 13:29:04 -0800, Jonathan.
>> <Jonathan@discussions.microsoft.com> wrote:
>>
>> >First of all thanks for all the help so far.
>> >
>> >Second it's not working. I'm about to pull all of my hair out. why is it
>> >not working.
>> >
>> >I updated the firmware
>> >I changed the IP settings to Obtain IP automatically
>> >I made sure that my WPA was turned off on my router
>> >I restarted my computer and I had no connection.
>> >
>> >I also couldn't go to the IP to configure my D-Link. I changed it to
>> >192.168.2.9 (Belkin is 192.168.2.1).
>> >
>> >It's on the right SSID
>> >It's on Infrastructure
>> >
>> >but I just can't connect in wireless mode. I will be bald by the weekend.
>> >
>> >"Barb Bowman (MVP-Windows)" wrote:
>> >
>> >> to test it, use ANY computer that has a wired ethernet card. turn off
>> >> wireless on the test computer. set the wired tcp/ip properties to dynamic.
>> >> plug the DGL-3420 into the AC, connect the cable from the DGL-3420 to the
>> >> wired port on the computer. do not connect the computer to your router any
>> >> other way. it should just work.
>> >>
>> >> if the XBOX is set at DHCP and automatic everything in the control panel, IT
>> >> will just work when you plug the cable in to connect the DGL-3420.
>> >>
>> >> Jonathan. wrote:
>> >> > Ok, got ya.
>> >> >
>> >> > I can test on my wife's laptop that normally has a wireless
>> >> > connection. I can take the card out make the IP non static, and
>> >> > reboot with the wireless connection, and I should be able to surf the
>> >> > net.
>> >> >
>> >> > if I try that on my regular computer that is hooked into the router
>> >> > will it work? I mean is if I do that with my regular computer(mce)
>> >> > and have no computer plugged into the router but plugged into the D-
>> >> > Link I can still surf the net?
>> >> >
>> >> > and finally, Does the xbox itelf do anything different to tell me
>> >> > that it has a network connection?
>> >> >
>> >> > "Barb Bowman (MVP-Windows)" wrote:
>> >> >
>> >> >> after you've set up the DGL-3420, UNstatic the computer's ethernet
>> >> >> connection and set it back to DHCP. reboot that computer with the
>> >> >> DGL-3420 attached to the ethernet port. if you've set it up
>> >> >> correctly, you should be able to surf the net. once you've
>> >> >> established that, you can move it from the computer to the XBOX.
>> >> >> then power up your XBOX, wait a minute or so and it should just work.
>> >> >>
>> >> >> Jonathan. wrote:
>> >> >>> the only thing I haven't done is update the firmware... hope that
>> >> >>> helps.
>> >> >>>
>> >> >>> this is what I did. I connected it to a computer... changed the ip
>> >> >>> to get into the settings. Changed all of that. Changed the ip.
>> >> >>> Changed my computer's IP to auto detect. and I can still get into
>> >> >>> the device through the new ip settings and I can also connect
>> >> >>> through my computer. I can ping the device through the new setting.
>> >> >>>
>> >> >>> But when I unplug the ethernet cable and try doing the wireless
>> >> >>> thing I'm lost. How can I test now. would I be able to plug it
>> >> >>> into a laptop I have and then see if I can ping it? Would I have
>> >> >>> to change the IP on that laptop? I just can't tell if I'm
>> >> >>> connecting that way.
>> >> >>>
>> >> >>> I plan on taking a tv, my xbox and putting it in the same room as my
>> >> >>> meida center/router to see if it's a range issue.
>> >> >>>
>> >> >>> But I don't think I'm connecting to the device from a wireless
>> >> >>> situation. I can do it when I plug it in directly to the router.
>> >> >>> any thoughts... help
>> >> >>>
>> >> >>> "Barb Bowman (MVP-Windows)" wrote:
>> >> >>>
>> >> >>>> one more tip - there is updated firmware for this (if it still has
>> >> >>>> 1.00) on the dlink site. while you're configuring the device, first
>> >> >>>> upgrade the firmware...
>> >> >>>>
>> >> >>>> Jonathan. wrote:
>> >> >>>>> ok, all 3 of my lights were on... but how else can I tell it's
>> >> >>>>> working? when I ran through the setup my computer couldn't detect
>> >> >>>>> it.
>> >> >>>>>
>> >> >>>>> It could be a range thing, but is there any other way I can see
>> >> >>>>> that it's working? I know that I've gotten a signal from that
>> >> >>>>> room in the past.
>> >> >>>>>
>> >> >>>>> I just want to see if I got this device working. any help would
>> >> >>>>> be appreciated.
>> >> >>>>>
>> >> >>>>> "Barb Bowman [MVP-Windows]" wrote:
>> >> >>>>>
>> >> >>>>>> I configured the DGL-3420 with a static IP and WPA from a
>> >> >>>>>> computer. The XBOX I left at dynamic settings. I just plugged
>> >> >>>>>> the 3420 into the XBOX and it worked.
>> >> >>>>>>
>> >> >>>>>> On Thu, 24 Mar 2005 17:23:02 -0800, Jonathan.
>> >> >>>>>> <Jonathan@discussions.microsoft.com> wrote:
>> >> >>>>>>
>> >> >>>>>>> the instruction say plug in your D-Link (DGL-3420) to the xbox,
>> >> >>>>>>> then run the "network setup wizard" to complete your
>> >> >>>>>>> intallation.
>> >> >>>>>>>
>> >> >>>>>>> I don't get that option. What am I missing?
>> >> >>>>>>>
>> >> >>>>>>> I configured it to my network like they said, but it's still not
>> >> >>>>>>> working. Any thoughts. help. I think I'm almost there
>> >> >>>>>>
>> >> >>>>>> --
>> >> >>>>>> Barb Bowman
>> >> >>>>>> Expert Zone Columnist
>> >> >>>>>> http://www.microsoft.com/windowsxp/expertzone
>> >> >>>>>> MS-MVP (Windows)
>> >> >>>>
>> >> >>>>
>> >> >>>> --
>> >> >>>> Barb Bowman
>> >> >>>> Expert Zone Columnist
>> >> >>>> http://www.microsoft.com/windowsxp/expertzone
>> >> >>>> MS-MVP (Windows)
>> >> >>
>> >> >>
>> >> >> --
>> >> >> Barb Bowman
>> >> >> Expert Zone Columnist
>> >> >> http://www.microsoft.com/windowsxp/expertzone
>> >> >> MS-MVP (Windows)
>> >>
>> >>
>> >> --
>> >> Barb Bowman
>> >> Expert Zone Columnist
>> >> http://www.microsoft.com/windowsxp/expertzone
>> >> MS-MVP (Windows)
>> >>
>> >>
>> >>
>>
>> --
>> Barb Bowman
>> Expert Zone Columnist
>> http://www.microsoft.com/windowsxp/expertzone
>> MS-MVP (Windows)
>> 

--
Barb Bowman
Expert Zone Columnist
http://www.microsoft.com/windowsxp/expertzone
MS-MVP (Windows)

Relevant Pages

  • Re: MCX disconnects after 30 minutes
    ... "Barb Bowman" wrote: ... possibility for the issue that originate from the existing network. ... you'd have to try to renew the DHCP connection every half ... I just looked around in my router setup and in my network setup, ...
    (microsoft.public.windows.mediacenter)
  • Re: MCX disconnects after 30 minutes
    ... "Barb Bowman" wrote: ... possibility for the issue that originate from the existing network. ... you'd have to try to renew the DHCP connection every half ... I just looked around in my router setup and in my network setup, ...
    (microsoft.public.windows.mediacenter)
  • Re: Urgent! New router and big disaster
    ... by CEICW for any type of connection other than full time broadband was ... exists - is completely transparent to the SBS. ... "local router with an IP address" is the setup that matches her network. ... between the server and my cable modem. ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... connected to is; what type of connection; or even whether a connection ... exists - is completely transparent to the SBS. ... "local router with an IP address" is the setup that matches her network. ... between the server and my cable modem. ...
    (microsoft.public.windows.server.sbs)
  • Re: TV service query ? ? ?
    ... a wireless router. ... a router with extended coverage. ... cable and a wireless connection that you can not see. ... is to have users downloading r/t video, large video files, or other ...
    (alt.home.repair)