Re: MCE takes an enormous time to logon

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: jack (jack_at_discussions.microsoft.com)
Date: 01/05/05


Date: Wed, 5 Jan 2005 15:31:10 -0800

Hello OLO.

first let me thank you for the specified steps.

i did try that, the problem remains, though i think the time has been a
little bit shortened

jack

"ULO" wrote:

> Hello Jack,
>
> I experienced the same problem in WinXP Pro and solved it by the following:
>
> 1. close the MCE interface
> 2. on your Desktop, right-click "My Network Places"
> 3. select “Properties”
> 4. select the menu "Advanced" and then "Advanced Settings"
> 5. select "Provider Order"
> 6. high-light "MS Windows Network" and move this item to the top so it
> becomes the first one for “Network Providers”. Use the arrow-button on the
> right.
> 7. when done, select OK.
> 8. Reboot. Now it should work OK.
>
> Please report back if this solves your problem.
>
> Regards
> /ULO
>
>
> "Olcay Buyan" wrote:
>
> > Hi Jack,
> >
> > check your network settings. Maybe it's because of one of your network
> > adapters. If DHCP is turned on it will wait for a DHCP-server to get it's
> > IP-address. If there is no DHCP it will just wait until it time outs. So if
> > your not using DHCP try to turn off DHCP and restart your machine.
> >
> > Good luck,
> >
> > --
> > Olcay Buyan
> > Olcay@MCECustomizer.com
> > www.MCECustomizer.com - Let MCE fit your needs!
> >
> >
> > "jack" <jack@discussions.microsoft.com> wrote in message
> > news:0C5B4F9B-EBF9-4669-80B0-075DAB184865@microsoft.com...
> > > indeed.
> > >
> > > i am suspicious about the SP2 to cause that but have no way to remove it
> > > from mce, i think so because i didn't made any hardware changes before
> > > upgrading to 2005, and in my previous XO PRO instalation i didn't have any
> > > problems.
> > >
> > > "Jason Tsang" wrote:
> > >
> > >> If you make a new account and try to log in there, do the same symptoms
> > >> persist?
> > >>
> > >> --
> > >> Jason Tsang - Microsoft MVP
> > >>
> > >> Find out about the MS MVP Program -
> > >> http://mvp.support.microsoft.com/default.aspx
> > >>
> > >> "jack" <jack@discussions.microsoft.com> wrote in message
> > >> news:CFB7D607-0F4F-447D-B6E1-AB1944BE4F00@microsoft.com...
> > >> > Hi
> > >> >
> > >> > after installing MCE 2005 the logon process began to take about 3
> > >> > minutes
> > >> > although i have a AMD 64 BIT and larg amount of ram.
> > >> >
> > >> > if anyone can point out what is causing that problem, Thanks.
> > >>
> > >>
> > >>
> >
> >
> >



Relevant Pages

  • Re: ethernet router
    ... They will have a CISCO router that will have an ethernet ... Linux server to take care of it, but they aren't ready for that yet. ... router or another DHCP server can wrek havoc and get ... just gone a phone jack and one ethernet jack then I call it a "dsl ...
    (comp.dcom.lans.ethernet)
  • Re: Custom Shell and Network Settings
    ... Usually it is very easy to change network settings with netsh. ... The netsh support scripting. ... I've never heard of a synchronous call to enable DHCP and get new IP address. ... IP Helper API and other Net APIs are the best way to go with since you will have maximum flexibility and control. ...
    (microsoft.public.windowsxp.embedded)
  • Re: switching between two network settings
    ... The problem is at work we have a DHCP server, ... >> window tcp/ip properties, when you are set for DHCP you will see at the ... >> will work and at home DHCP will kick in. ... >>> I need to switch between two network settings twice a day. ...
    (microsoft.public.windowsxp.general)
  • Re: Notebook setup for home and office
    ... That's great Jack. ... > WinXP would let you set two Network settings (Local Area Connection ... >> I need to setup a notebook computer so that it works fine with a Netware ... >> different user profiles, or can it be done with one profile and 2 ...
    (microsoft.public.windowsxp.network_web)
  • Re: Why would a network connection just die?
    ... Dan Anderson wrote: ... > network settings for a couple months now. ... > stopped being able to DHCP an IP address from the network. ... on BOTH machines, ...
    (comp.os.linux)