Re: Digital box connection

From: Nigel Barker (nigel_at_hp.com)
Date: 12/31/04 

Date: Fri, 31 Dec 2004 10:39:52 GMT

On Thu, 30 Dec 2004 23:25:05 -0800, "eadas" <eadas@discussions.microsoft.com>
wrote:

>Thanks Terry, I have contacted HP regarding update and will certainly do
>that, However I am not sure if that will sort my problem?
>Perhaps you can confirm a couple of things.
>1. When I go through the setup proceedure and get to the "Choose a working
>channel" stage, all i can get to show are the normal TV channels ie
>BBC1,2,ITV1,2,channel4&5. Is this right? (none of the freeview channels)
>2. I cannot change channel on the freeview box using the MCE remote after
>configeration or the freeview set top box remote. Is that right?
>I dont know, but i think something is, or i am doing something
>fundermentally wrong
>Any comments would be great
>regards Eddie
>

It sounds like you have not reconfigured your TV tuner to use the set top box
but still have your previous set up. 

--
Nigel Barker
Live from the sunny Cote d'Azur

Relevant Pages

  • Re: OT - Freeview ghosting
    ... Channel 4 I think. ... Just retune the UHF modulator in the freeview box or switch off UHF ... and use the scart. ...
    (uk.radio.amateur)
  • Re: PVRs with Hybrid Tuners?
    ... Correct but TV's can tune to channel 36. ... Sorry Mike, Think you need to understand the difference between inputs and outputs here, and more importantly the lack of an mpeg encoder in these freeview products. ... This is an DVR output function, either for playback of HDD recorded video or display of freeview tuner signals. ... There are a number of DVD recorders with built in hard drives and analogue tuners. ...
    (uk.tech.tv.video.pvr)
  • Re: Ask EU: Digital TV and satellite dishes
    ... F-plug on the end comes into the lounge, as well as the normal aerial. ... reception by connecting his freeview box to the dish. ... I suspect he meant Freesat and not Freeview.. ... All the terrestial UK channels bar Channel 4 are ...
    (uk.media.radio.archers)
  • Re: Pulling My Hair Out
    ... When you are in the position to choose the record channel, ... you pressed the down arrow it went to AV1 then to AV2. ... The freeview has only one scart, the VCR/DVD has two, ... >> Put a tape into the VCR/DVD pressed play and got the tape ...
    (uk.rec.video.digital)
  • Re: PVRs with Hybrid Tuners?
    ... >> Correct but TV's can tune to channel 36. ... >> see if you have the same interpetation MikeS ... > or display of freeview tuner signals. ... is about setting the RF channel (or selecting SCART as ...
    (uk.tech.tv.video.pvr)