Re: 2nd tv tuner
From: Bob C. (nospam_at_mydomain.net)
Date: 12/03/04
- Next message: Bryan S Davis: "RE: ATI AIW 9800 Driver Install Order?"
- Previous message: Bryan S Davis: "ATI Tuner Cards..."
- In reply to: Bruce T: "RE: 2nd tv tuner"
- Next in thread: Terry Walsh: "Re: 2nd tv tuner"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 3 Dec 2004 01:35:23 -0600
I tried the same thing and had the same result. Should we buy another
brand/model of tuner or do you think that eventually a driver will be
introduced that will work for us? I just received my Hauppauge 150 in the
mail today so I could probably return it (but don't want to if the potential
for it to work in the future is great). What's you thoughts on this?
BOB C.
"Bruce T" <BruceT@discussions.microsoft.com> wrote in message
news:884A7D54-A277-480D-9E1B-6A58162E4F9C@microsoft.com...
> OK. I've uninstalled the Emized driver, physically removed the Emuzed
card,
> tried to remove every trace of it the from the registy, etc., and then
> installed the MCE-150 and still ended up with the same problem. The Media
> Center Receiver Service crashes every time.
>
> I think that's it. Until Hauppauge fixes their driver, we are out of luck.
>
> Bruce T
>
> "Bruce T" wrote:
>
> > I think we are all in the same boat.
> >
> > The only thing I haven't tried yet is to physically remove the Emuzed
card
> > from my system. I will try that next.
> >
> > I did get hold of someone from Hauppauge technical support only to find
that
> > the drivers on their Website are the latest they have. I think we may be
> > hosed here.
> >
> > Here is the email address of the technical support person from Hauppauge
if
> > you want to pile on in our misery.
> >
> > Brice Washington
> > Hauppauge Computer Works
> > Technical Support
> > 631-434-3197 Ext 398
> > bwashington@hauppauge.com
> >
> > Bruce T
> >
> > "Bob C." wrote:
> >
> > > I am having the exact same problem as you guys with the
WinTV-PVR-150MCE and
> > > MCE 2005. I've removed all traces of the Hauppauge device and
resintalled it
> > > with every driver recommended in this thread. As soon as the driver
is
> > > installed I immediately receive the message, "Media Center Receiver
Service
> > > Has Encountered A Problem And Needs To Close". I've been trying to
get this
> > > to work all night and am getting really frustrated. If I remove the
> > > Hauppauge tuner and just leave my Emuzed Maui card in, everything
works fine.
> > > It's only when I finish installing the driver for the Hauppauge that
I get
> > > the above error message.
> > >
> > > I've used the latest driver from the Hauppauge website listed under
MCE
> > > 2005. I've used the drivers recommended from this thread. Nothing
helps.
> > >
> > > I've looked in Device Manager and both the Emuzed Maui and the
Hauppauge PCI
> > > cards are listed and there are no errors in my hardware list.
> > >
> > > My system is an HP 854n with 1 GIG RAM, Nvidia FX5600 Asylum, Emuzed
Maui
> > > tuner. I upgraded it from the 2003 version of MCE to 2004. I
installed all
> > > the HP patches and SP2. I then upgraded it with the 2005 version of
MCE and
> > > all worked fine, until I installed the Hauppauge 150 and the drivers
for it.
> > >
> > > I even completely redid my pc from scratch this afternoon (formatting
the
> > > hard drive and reinstalling everything, etc.) to ensure that I wasn't
missing
> > > something.
> > >
> > > Please help us if you can...
> > >
> > > BOB C.
> > >
> > > "Bruce T" wrote:
> > >
> > > > Brian,
> > > >
> > > > Just so you don't feel bad, I'm having exactly the problem as you.
> > > >
> > > > I've installed the latest Hauppauge drivers, no luck. Te program
that is
> > > > crashing is the Media Center Reciever Service (ehRecvr.exe).
> > > >
> > > > I will now read further in this thread to see if anyone was able to
get to
> > > > the bottom of this problem.
> > > >
> > > > Bruce T
> > > > "Brian Mullins" wrote:
> > > >
> > > > > Ok, I have been working with it all evening, here is what I got. I
did a non
> > > > > distructive recovery (I needed to do it anyway) and then installed
mce 2005
> > > > > before I did anything else to the maching. Next I took out the
original
> > > > > emuzed and it still would not work, it said it could not detect a
tv tuner.
> > > > > So I installed the emuzed back in with the Hauppage out and it
worked just
> > > > > fine. When I have the Hauppauge tuner in I get an error thing
asking if it
> > > > > wants me to send a report to microsoft, I cant remember what the
exact error
> > > > > was but it said that is was one of the files in the
c:/windows/ehome folder,
> > > > > I can tell you what is it later if needed.
> > > > > So my conclusions are that for some reason that Hauppauge will
just not
> > > > > work, I know I can make it work somehow, but I just don't know
how.
> > > > > And also I do have the correct drivers installed.
> > > > >
> > > > > Any ideas?
> > > > >
> > > > > Thanks,
> > > > > Brian Mullins
> > > > >
> > > > > "Brian Mullins" wrote:
> > > > >
> > > > > > I have added a Hauppauge 150mce to my hp 873n, windows sees the
card, but, I
> > > > > > can not get mce to see the 2nd tuner. What am I missing?
> > > > > >
> > > > > > Thanks,
> > > > > > Brian Mullins
> > > > > >
> > > > > >
> > > > > >
- Next message: Bryan S Davis: "RE: ATI AIW 9800 Driver Install Order?"
- Previous message: Bryan S Davis: "ATI Tuner Cards..."
- In reply to: Bruce T: "RE: 2nd tv tuner"
- Next in thread: Terry Walsh: "Re: 2nd tv tuner"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
