Re: Entender can't play video?
anonymous_at_discussions.microsoft.com
Date: 11/24/04
- Next message: MCE2005Newbie: "Re: Dvico HDTV DVB-T MCE2005 can't find any service"
- Previous message: terri: "Re: Requirements to run XP MCE 2005 (Video card)?"
- In reply to: Todd Bowra [MSFT]: "Re: Entender can't play video?"
- Next in thread: Todd Bowra [MSFT]: "Re: Entender can't play video?"
- Reply: Todd Bowra [MSFT]: "Re: Entender can't play video?"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 23 Nov 2004 18:15:56 -0800
I am not running any firewall but th XP included, and yes
I tested with it off.
All logged errors after the extender "affiliated" are in
the ehshell.exe; module adlsp.dll version 3.0.0.19
I hope this can shed some light on the problem.
Thanks again.
Al
>-----Original Message-----
>What firewall software are you running?
>
>Also, try checking your Event Viewer logs to see if
there are any
>errors/warnings corresponding to the disconnect (right
click My Computer -->
>Manage, select Event Viewer, look at System,
Application, and Media Center
>logs)
>
>--
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>
><anonymous@discussions.microsoft.com> wrote in message
>news:15a601c4d186$6e560310$a501280a@phx.gbl...
>> Todd;
>>
>> It is a HP Media Center PC m300y; ACUS mother board at
>> firmware 3.28; nVidia FX 5600 video card, 1 gig PC3200
>> memory, 160 gig HD, DVD-RW and DVD, etc. Network is
>> through a new Linksys WRT55AG V.2 router hard wired to
MC
>> PC and over 802.11a to extender. Extender is about 25-
30
>> feet from router. I have three machines hardwired to
the
>> router. I turned off all 802.11b/g devices even
though I
>> am using 802.11a with excellant to very good signal.
>>
>> Network tests: PING for over 3 minutes yielded 1ms per
>> responce expect 1 at 4ms. and 1 at 6 ms.
>>
>> The Media Center Performance test yielded and excellant
>> high of signal over 10 minutes.
>>
>> Ran the pictures as a slide show for over 30 minutes
with
>> no issues; 8 megapixel images at 6 meg each.
>>
>> Live TV and playback run fine on the PC, and I turn all
>> application, off when testing extender.
>>
>> Al
>> >-----Original Message-----
>> >Can you provide more details of your setup?
>> >- What are your PC specs?
>> >- What is your network topology? (including all
>> switches, routers, etc.)
>> >- Are you running a firewall other than the Windows
>> Firewall?
>> >
>> >Also, you could try connecting your MCX to your PC via
>> Ethernet to eliminate
>> >the wireless network as the problem (you may need to
>> temporarily relocate
>> >your MCX near your PC to do this)
>> >
>> >--
>> >This posting is provided "AS IS" with no warranties,
and
>> confers no rights.
>> >
>> >
>> ><anonymous@discussions.microsoft.com> wrote in message
>> >news:946201c4d15e$7f2e5390$a301280a@phx.gbl...
>> >> Well; the HP upgrade DVD (not CD) came yesterday
and I
>> >> installed it! System seems OK (I reloaded factory
>> image
>> >> and started from scratch loading all Microsoft and
HP
>> >> patches to prepare for MCE 2005) so i loaded Linksys
>> >> extender software. According to the performance
test I
>> >> have a great signal although it does spike low for
ms.
>> at
>> >> times. I can view pictures but whenever i go to
video,
>> >> either live or recorded it yields an error code :
>> >> 00020002 and disconnects. I installed the HDTV
upgrade
>> >> for MCE 2005 as HP suggested and no help. My
router is
>> >> also Linksys a WRT55AG V.2, also weeks old and up to
>> >> rev.; firmware 1.10.
>> >>
>> >> OK, any suggestions? greatly appreciated.
>> >
>> >
>> >.
>> >
>
>
>.
>
- Next message: MCE2005Newbie: "Re: Dvico HDTV DVB-T MCE2005 can't find any service"
- Previous message: terri: "Re: Requirements to run XP MCE 2005 (Video card)?"
- In reply to: Todd Bowra [MSFT]: "Re: Entender can't play video?"
- Next in thread: Todd Bowra [MSFT]: "Re: Entender can't play video?"
- Reply: Todd Bowra [MSFT]: "Re: Entender can't play video?"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
