Re: Building a UK MCE machine?
From: Nigel Barker (nigel_at_hp.com)
Date: 06/25/04
- Next message: Andrew: "Media Center Freeze on FF"
- Previous message: JDTHREE [MVP]: "Re: Video Error on all video"
- In reply to: Tekguru (Daron Brewood): "Re: Building a UK MCE machine?"
- Next in thread: Tekguru (Daron Brewood): "Re: Building a UK MCE machine?"
- Reply: Tekguru (Daron Brewood): "Re: Building a UK MCE machine?"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 25 Jun 2004 16:26:18 GMT
On Fri, 25 Jun 2004 16:17:32 +0100, "Tekguru (Daron Brewood)"
<tekguru@tekguru.co.uk> wrote:
>Right, according to the MCE data on MDSN the following will work:
>
>Hauppauge (WinTV-PVR-250)
>LeadTech (LR6632-NTSC w/FM)
>eMuzed (Maui II PCI PVR)
>Pixela (PIX-CTV200PW, PIXMPTV/U3W)
>Avermedia (M150-rev D)
>
>The question is will these work with UK FreeView, I assume the
>WinTV-PVR-250 will as I think I've seen that for sale in PC world?
Be careful when you say 'work with UK Freeview'. If you mean connect an external
Freeview Set Top Box via the s-video input & capture using the hardware MPEG2
encoder then yes the PVR-250 will work with Freeview. However in the UK your
choice is between analogue TV via the tuner card plus input from a STB
(Freeview, Sky or cable) a la PVR-250 _or_ a DVB-T Freeview tuner that does not
have a hardware MPEG2 encoder so you cannot connect a STB. I don't think that
any of the above cards is a DVB-T card. There obviously are some supported as
MCE systems with DVB-T are sold in the UK. The Conexant LR6650 Digital Tv Tuner
card is what ships in the Packard-Bell MCE systems but I don't know whether you
can buy that as a standalone item.
-- Nigel Barker Live from the sunny Cote d'Azur
- Next message: Andrew: "Media Center Freeze on FF"
- Previous message: JDTHREE [MVP]: "Re: Video Error on all video"
- In reply to: Tekguru (Daron Brewood): "Re: Building a UK MCE machine?"
- Next in thread: Tekguru (Daron Brewood): "Re: Building a UK MCE machine?"
- Reply: Tekguru (Daron Brewood): "Re: Building a UK MCE machine?"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|