Re: Lost All Newsgroups/Error Message

Hopefully attached below.... Thanks one more time!

reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =

SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain

reset
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{06AC1072-C7CB-4215-A2CD-E3257FA1B129}\NameServerList
old REG_MULTI_SZ =
<empty>

added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{06AC1072-C7CB-4215-A2CD-E3257FA1B129}\NetbiosOptions
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{54DDDDF5-ECF3-4B6C-BF1A-0A08D0825B0C}\NetbiosOptions
added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{61820C7F-1F2D-4EC6-AC52-4AA4C5CE956B}\NetbiosOptions
reset
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{E5EC0A67-7EEA-48D6-BF30-90F5C13ABCA3}\NameServerList
old REG_MULTI_SZ =
<empty>

added
SYSTEM\CurrentControlSet\Services\Netbt\Parameters\Interfaces\Tcpip_{E5EC0A67-7EEA-48D6-BF30-90F5C13ABCA3}\NetbiosOptions
deleted SYSTEM\CurrentControlSet\Services\Netbt\Parameters\EnableLmhosts
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{06AC1072-C7CB-4215-A2CD-E3257FA1B129}\NameServer
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{06AC1072-C7CB-4215-A2CD-E3257FA1B129}\TcpWindowSize
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\DefaultGateway
old REG_MULTI_SZ =
<empty>

added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\DisableDynamicUpdate
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\IpAutoconfigurationAddress
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\IpAutoconfigurationMask
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\IpAutoconfigurationSeed
reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\NameServer
old REG_SZ = fÛ?À255.0.0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\RawIpAllowedProtocols
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\TcpAllowedPorts
old REG_MULTI_SZ =
0

reset
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{A20DF928-1E99-4C33-9085-9171A7781315}\UdpAllowedPorts
old REG_MULTI_SZ =
0

deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{E5EC0A67-7EEA-48D6-BF30-90F5C13ABCA3}\NameServer
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DontAddDefaultGatewayDefault
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableIcmpRedirect
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\EnableSecurityFilters
deleted SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\SearchList
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\TcpMaxDataRetransmissions
deleted
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\UseDomainNameDevolution
reset Linkage\UpperBind for
PCI\VEN_8086&DEV_1050&SUBSYS_01741028&REV_02\4&1C660DD6&0&40F0. bad value
was:
REG_MULTI_SZ =
PSched

reset Linkage\UpperBind for ROOT\MS_NDISWANIP\0000. bad value was:
REG_MULTI_SZ =
PSched

<completed>

Obviously this is beyond me, so thanks a bunch...
"Michael Santovec" wrote:

Open the log in Notepad, and then copy/paste it into the reply here.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"AHAllen" <AHAllen@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0884B479-BA9C-4335-9649-43F7825ACDAD@xxxxxxxxxxxxxxxx
Michael: I did want to leave word that I did create a log that has a
lot of
technical data that I could never begin to understand. The enrty at
the
bottom does read: bad value was: REG_MULTI_SZ=PSched
Does this mean anything? I don't know how to attach the log for you to
look
at.. Thanks, Alex Allen

"Michael Santovec" wrote:

Since the Telnet command worked, that means it's not an issue of port
119 being blocked entirely. Although firewalls can generally be
setup
to allow traffic on a port for some programs while blocking others.

And if it were some corruption in OE data files or registry, the new
identity should not have had that problem.

You may want to create an NNTP log with will show more details about
the
communications between Outlook Express and your news server. Select
Tools, Options, Maintenance, Troubleshooting, News. Then access the
news server. The log will be created in the same folder with your
DBX
files (see Tools, Options, Maintenance, Store Folder). You may need
to
close OE after accessing the news server for the log to get written
to
disk.


--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"AHAllen" <AHAllen@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:09D0A5E5-F89E-4787-B97F-3DA038C44D4A@xxxxxxxxxxxxxxxx
Thanks for getting back, Mike. I tried your suggestion with the
command and
it responded correctly. I am not using a router & use 2003 Office
Pro
if that
helps.... AH Allen

"Michael Santovec" wrote:

Try a Start, Run and enter the following command

telnet xxxx 119

where xxxx is the news server name. You can try your ISP's news
server
and Microsoft's.

If you can connect, it should respond with a command window and an
identifying message from the news server starting with "200". If
it
does, type QUIT then press Enter to exit.

If you cannot connect, then you know that the problem is outside
of
OE.

Are you going though any sort of Router?

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"AHAllen" <AHAllen@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:015F90E6-0C7C-4DD7-8E4B-3FAE55FF3FAC@xxxxxxxxxxxxxxxx
Ooops! I have been unable to set up MS news successfully. I also
created a
new identity and tried that with no success. I made sure all
firewalls
were
off before I did this. If it is a firewall issue, are there any
"simple"
remedies. Thanks again for your input!

"Michael Santovec" wrote:

Installing or uninstalling IE7 should not have affected your
newsgroups.
IE has nothing to do with newsgroups.

Try setting up the Microsoft news server and see if that works
OK.
To set up an account for MSnews in OE
http://www.insideoe.com/resources/communities.htm#setupmsnews

If that works, then it points to a problem with your ISP's news
server
or settings for it. In that case, try removing the news
account,
restart OE and set it up again. If you still have problems,
try
setting
it up in a new identity.
How to Create and Use Identities in Outlook Express
http://support.microsoft.com/?kbid=209169

If the Microsoft news server also fails, that could point to a
firewall
issue.

--

Mike - http://pages.prodigy.net/michael_santovec/techhelp.htm


"AHAllen" <AHAllen@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:A2F9671B-488C-4BC7-8E1B-AF18ADD9DA76@xxxxxxxxxxxxxxxx
I had Explorer 7 downloaded, decided I did not like it, so
returned
to
my old
Explorer 6. On Outlook Express, the newsgroups disappeared.
When
I
try
to
re-set them, I get an error message that says "Your NNTP
server
has
not
responded in 60 seconds, do you want to continue". Nothing
else
ever
happens.
The settings are the same as before and I had no problem
accessing
newsgroups. I went thru a session with the local provider
(Time
Warner) and
the technician said it appeared to be a problem with IE. If
there
any
help or
suggestion out there... Thanks!












.

Relevant Pages

  • Re: Vista newsgroups?
    ... Just reset the newsgroups here and ... Clicking on any of these newsgroups should get you set up with ... Windows Vista newsgroups available on the Microsoft News Server ...
    (microsoft.public.windowsxp.basics)
  • Re: Getting ALL messages in a newsgroup, not just the latest one third
    ... That is probably all that there is on your news server. ... To reset the NG, right click on the NG name in the ... >> download xxx headers at a time unchecked, ... You may have to Reset the newsgroup. ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: News Server Problems
    ... Andrew Jameson wrote: ... News Server is fine. ... It was a fresh load of messages so the message ... number have been reset to much lower numbers. ...
    (borland.public.delphi.non-technical)
  • Re: Newsgroup not downloading all messages
    ... It may well be your news server, but uncheck Get XXX headers at a time. ... Then in Tools | Options | Maintenance | Clean Up Now, select the newsgroupat the top, and then Reset. ... I reset the newsgroup back to zero and even deleted the news group but still the messages won't download. ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: Components4Developers enters strategical partnership with Heidi Computers Ltd
    ... You may need to reset your newsgroup file if using OE. ... C4D have now changed internally to use SnugServer as news server. ...
    (borland.public.delphi.thirdpartytools.general)