Re: OE6 problem in sending
- From: "l;;noio'" <pojp>
- Date: Mon, 30 May 2005 03:45:08 +0545
"PA Bear" <PABearMVP@xxxxxxxxx> wrote in message
news:O7ViBYuYFHA.2160@xxxxxxxxxxxxxxxxxxxxxxx
> Wow, I haven't seen adjusting MTU value to be a fix for quite a while now!
>
> Only thing I might suggest is to check with D-Link for firmware updates:
> http://support.dlink.com/downloads/.
>
> YW, Rino.
> --
> ~PA Bear
>
>
> <<< R I N O >>> wrote:
>> Hi Pa Bear,
>> Thank You Very Much! I finally find the culprit for PC1. Your No. "2b.
>> In the most unlikely event you're using an older, never updated Linksys
>> router, see http://www.linksys.com/support/support.asp?spid=87 " did
>> fixed my DSL Router. This is for PC1 cable connect to Router - already
>> fixed.
>>
>> For PC2 I'm using D-Link Wireless 108G Desktop Adapter it need to fix
>> too. I tried your 2a Tips but could not find the right combination of MTU
>> value. What I have miss here? PC2 could only received mail but not for
>> sending.
>>
>> --Rino
>>
>>
>> "PA Bear" <PABearMVP@xxxxxxxxx> wrote in message
>> news:%231HsufcYFHA.2796@xxxxxxxxxxxxxxxxxxxxxxx
>> Well, yes, it could be a problem on the server's end though experience
>> has
>> taught us that most such errors are due to email scanning or a damaged
>> identity. As you seen to have ruled these out:
>>
>> 1. Temporarily disable any third-party firewall to see if it might be
>> interfering.
>>
>> 2a. Check MTU settings for your router or the machine itself. See the
>> OS-specific section of http://support.microsoft.com/?kbid=315008.
>>
>> 2b. In the most unlikely event you're using an older, never updated
>> Linksys
>> router, see http://www.linksys.com/support/support.asp?spid=87
>>
>> I would *not* mess with Incredimail or have it installed while sorting
>> out
>> this problem.
>>
>> <<< R I N O >>> wrote:
>> > Hi Pa Bear,
>> > I follow everything and it didn't work either. I even empty My InBox,
>> > Sent, Draft and compact all folders. I also did (newly) install
>> > IncrediMail just to test and the same problem happened. Incredimail
>> > says
>> > 'Process Incomplete'. It also take so long just to find server and
>> > finally reported as failed.
>> >
>> > Could all this symptoms mean my mail server is the problem? My message
>> > is one word only - 'Test' on the Subject and in Body of Message - the
>> > process take so long to report failed.
>> >
>> > --Rino
>> >
>> >
>> > "<<< R I N O >>>" <Sorry@xxxxxxxxxx> wrote in message
>> > news:uVFOUDbYFHA.2572@xxxxxxxxxxxxxxxxxxxxxxx
>> > Thanks Pa Bear for your assistance. I'll do and check your given tips
>> > and will report back. --- Rino
>> >
>> >
>> > "PA Bear" <PABearMVP@xxxxxxxxx> wrote in message
>> > news:%23$Bwl3aYFHA.1404@xxxxxxxxxxxxxxxxxxxxxxx
>> > Your current Identity may have been damaged by the email scanning,
>> > especially if its the default Main Identity. Try one or more of your
>> > accounts in a new Named Identity (File>Identities>Add new identity).
>> > Assuming all is well, import messages from the old Identity before
>> > deleting
>> > it (File>Identities>Manage Identities).
>> >
>> > To avoid such corruption in future:
>> >
>> > Don't use Inbox or Sent Items to archive messages. Move them to local
>> > folders created for this purpose.
>> >
>> > Empty Deleted Items folder daily.
>> >
>> > Disable Background Compacting [N/A in SP2] and frequently perform a
>> > manual compact of all OE folders while "working offline". More at
>> > http://insideoe.tomsterdam.com/files/maintain.htm.
>> >
>> > Your anti-virus application's email scanning feature can also cause
>> > such
>> > corruption. Disable it. It provides no additional protection.
>> >
>> > <<< R I N O >>> wrote:
>> > > Hello DGuess,
>> > > Thanks for your swift reply but it didn't work. I even tried turn-off
>> > > in-coming and out-going scanning. I watch this time and the process
>> > > is
>> > > taking so long just to connect and still failed. All my out mail
>> > > remained in OutBox.
>> > >
>> > > OE Error message:
>> > > The connection to the server has failed. Account:
>> > > 'rino@xxxxxxxxxxxxx', Server: 'mail.apexworld.net', Protocol: SMTP,
>> > > Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number:
>> > > 0x800CCC0E
>> > >
>> > > --Rino
>> > >
>> > >
>> > > "DGuess" <majik@xxxxxxxxxxxxxxx> wrote in message
>> > > news:ONkDRRaYFHA.3836@xxxxxxxxxxxxxxxxxxxxxxx "<<< R I N O >>>"
>> > > <Sorry@xxxxxxxxxx> wrote in message
>> > > news:eCPkW7ZYFHA.712@xxxxxxxxxxxxxxxxxxxxxxx
>> > > > Hi, my OE6 is working fine for many years and only lately that I
>> > > > could not send but I could received mail. I also used AVG AV and it
>> > > > always gives this report:
>> > > >
>> > > > This is the AVG E-mail Scanner program.
>> > > >
>> > > > I'm sorry to have to inform you that the message returned
>> > > > below could not be delivered to one or more destinations.
>> > > >
>> > > > -------------------------------------------------------------------
>> > > > Cannot open smtp connection to '209.126.233.225'
>> > > > Connect: A connection attempt failed because the connected party
>> > > > did
>> > > > not properly respond after a period of time, or established
>> > > > connection failed because connected host has failed to respond.
>> > > > (10060)
>> > > >
>> > > > -------------------------------------------------------------------
>> > > >
>> > > > Your e-mail message is being returned to you in the next part of
>> > > > this message. Try to send the message again.
>> > > >
>> > > > Should you need assistance, please contact your administrator or
>> > > > your internet service provider.
>> > > >
>> > > > Below is my OE6 Error Message:
>> > > > The connection to the server has failed. Account:
>> > > > 'rino@xxxxxxxxxxxxx', Server: 'mail.apexworld.net', Protocol: SMTP,
>> > > > Port: 25,
>> > > > Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
>> > > >
>> > > > My ISP cannot do anything & they said it is working just fine when
>> > > > they test sending. The same problem happened to two different PC.
>> > > >
>> > > > I need your help or assistant. TIA
>> > > > --Rino
>> > > >
>> > > >
>> > >
>> > >
>> > >
>> > > Turn off email scanning and try it again.
>> > >
>> > > Email scanning provides no additional benefits other than the user
>> > > seeing something is going on. If you keep up to date on the AV
>> > > signatures, any vurus or worm you open in an email would be detected
>> > > by the base AV software. If you don't keep up to date then email
>> > > scanning would be of no use because it's not up to date to detect
>> > > anything. Scanning has been know to cause problems such as not
>> > > sending or receiving or timing out.
>
.
- References:
- Re: OE6 problem in sending
- From: DGuess
- Re: OE6 problem in sending
- From: PA Bear
- Re: OE6 problem in sending
- From: PA Bear
- Re: OE6 problem in sending
- From: PA Bear
- Re: OE6 problem in sending
- Prev by Date: Outlook Express
- Next by Date: Re: Outlook Express
- Previous by thread: Re: OE6 problem in sending
- Next by thread: I do not know
- Index(es):
Relevant Pages
|
