Re: Msimn error in KERNEL32.dll

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Bill Neff (BillNeff_at_discussions.microsoft.com)
Date: 01/25/05 

Date: Tue, 25 Jan 2005 10:35:07 -0800

I will look into that
Thanks

"Jim Pickering" wrote:

> Sounds like it may be an older computer. The majority of kernel32.dll
> errors are associated with older, outdated display card adapter drivers.
> You might want to visit the website of the manufacturer of your display
> adapter card to see if they offer updated drivers for your card. IE6 and
> OE6 are very demanding of display adapters.
> --
> Jim Pickering, MVP, Outlook Express
> Please reply to newsgroup only.
>
>
> "Bill Neff" <Bill Neff@discussions.microsoft.com> wrote in message
> news:BB3FDC30-A597-4544-8CA5-6088D97B8FCF@microsoft.com...
> > When I exit out of outlook express 6 in Windows ME i get this message.
> >
> > Msimn has casued an error in KERNEL32.DLL
> > Msimn will now close.
> > If you continue to experience problems,
> > Try restarting you computer.
> >
> > How can I fix this problem?
>
>

Relevant Pages

  • Re: Msimn error in KERNEL32.dll
    ... outdated display card adapter drivers. ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Re: How do you access second display adapter without being a desktop extension?
    ... When I don't extend the desktop to the 2nd monitor on my ... dual head card, it only displays 1 adapter. ... as having a dualhead card - the display must have the desktop ...
    (microsoft.public.win32.programmer.directx.graphics)
  • Re: Graphic adapters
    ... > until the OS is booted then the OS loads the driver for the adapter. ... Firmware is needed for the card to display anything, ... _Every_ PC gfx card has a own BIOS, even the very oldest monochrome text gfx ...
    (comp.unix.solaris)
  • Re: HDdriver and CF card drive problem
    ... I don't think it's the cable, but the adapter is indeed acting ... The card reader uses a 25 pin connector, so to connect it to the 50 ... The other end of the cable from the ICD Link II goes to the Mega STe ... plan is to install some sort of IDE interface and use a Compact Flash ...
    (comp.sys.atari.st)
  • Re: PCMCIA Adapter for SD cards: Which one, and how?
    ... With a SD to CF adapter, I can now read a card faster than via USB 1.1, ... Going the route SD to CF adapter in a CF to PCMCIA adapter did not work ... Bus 1: ...
    (comp.os.os2.setup.storage)