Re: How to set IE6 to use one network
Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance
should read:-
Using 192.168.0.10 on network one and 192.168.1.11.- on network two (1Gb).
"pete" <petefa@xxxxxxx> wrote in message
news:dj0f5h$a2p$1@xxxxxxxxxxxxxxxxxxxxxxxx
> Hi,
> I have a ADSL modem connected to a network switch, network one (100mb)
> My PC is also connected to this switch and to another switch( 2 nics).
> Using 192.168.0.10 on network one and 192.1568.11.- on network two (1Gb).
> With network two nic enabled, (192.168.1.11), I can not connect to the
> www, which is on network one. If I disable network two, I can connect to
> the www.
> But I want network two to be enabled. :-)
> Any ideas?
> Thanks
>
>
>
.
Relevant Pages
- RE: IP address conflicts
... If you get a network vendor like Network Hardware Resale ... >> It's amazing how money will appear out of thin air if certain oxen get ... the switch you are suggesting I cannibalise uses the EtherToken ... When dealing with a bureaucracy I have found the most effective method is ...
(freebsd-questions) - Re: ConnectComputer Problem
... I'm a little confused by your network configuration. ... Switch2 --- SBS Server ... switch has internet access all the time, the second switch has the client ... NICs ...
(microsoft.public.windows.server.sbs) - Re: Help with long term network problem
... Using a CNET network switch connected to a CNet Wireless G router Model ... Having the chart listing all of the computers is a great start. ... /all" shows only an Intel 2200BG WiFi connection - no Ethernet is apparent. ...
(microsoft.public.windowsxp.network_web) - Re: LAN ip subnet is moving off from a bigger enterprise
... The host company runs Cisco ... Connect your switch to this ... At the CBO the network is 10.23.1.x and the gateway ... WS1 WS3 SBS HP4000 ...
(microsoft.public.windows.server.sbs) - Re: Ethernet network wiring ?s
... >> the planned network is designed correctly and for my own education on ... >> find I that I have a hub in my office that I used at some point in the ... > A switch is an active device. ... > the ports that have the ethernet address the message is intended ...
(comp.sys.mac.hardware.misc) |
|
