Re: IE & Router problem

"Paul W" <PaulW@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4B5C91D4-22EB-4C35-8F89-725366A4FE8A@xxxxxxxxxxxxxxxx
Norman,

Thanks for the input. I went throught the process steps you suggested and
got the same results as per your note for nslookup and ipconfig commands. I
tried setting router up with manaual DNS entries, but made no difference to
the original problem. (I used ipconfig to verify DNS addresses had changed).

So looks like another blank.

I tried to follow the thread of the discussions between yourself and Robert.
The ping command gave me the following. It translates to an ip address, but
then cannot find the host. Odd?:

"C:\Documents and Settings\Paul>ping tiscali.co.uk -n 1
Pinging tiscali.co.uk [212.74.99.30] with 32 bytes of data:
Request timed out.
Ping statistics for 212.74.99.30:
Packets: Sent = 1, Received = 0, Lost = 1 (100% loss),
C:\Documents and Settings\Paul>"


If that name is what you are entering in IE's Address bar
you're going to have unnecessary delay due to redirection anyway.

E.g. using telnet 80 here is what I get from a GET / to it
and with Host: tiscali.co.uk

<telnet>
HTTP/1.1 301 Moved Permanently
Date: Thu, 28 Jun 2007 02:25:52 GMT
Server: Apache/1.3.34 (Unix) PHP/4.4.2 mod_ssl/2.8.25 OpenSSL/0.9.7e
Location: http://www.tiscali.co.uk/
</telnet>

IOW you might as well start with that URL in the Location: header

Apparently it is found at the same IP address:

<nslookup>
Non-authoritative answer:
Name: www.tiscali.co.uk
Address: 212.74.99.30
</nslookup>


FYI

Robert
---


.

Relevant Pages

  • DNS / TCP-IP related Problem on Solaris 8
    ... nslookup, telnet etc. to function correctly e.g. telnet gives "unknown ... host", even for machines on the same subnet, nslookup hangs etc. I've ...
    (SunManagers)
  • Re: Cannot access a web page
    ... Could not open connection to the host on port 80 connect failed. ... Then you can use telnet to test with. ... > You can also use nslookup to check on your DNS. ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: 5.4: Cant start ssh due to entropy source blocking?
    ... However I did notice things like nslookup and host are now reporting ... I confirmed by rebooting the server and making sure sshd didn't try ... Stephane Raimbault, Systems Administrator ...
    (freebsd-stable)
  • Re: can access IPs but not by hostname
    ... I know you said nslookup shows DNS is fine but, can you you ping a host name ... Using any browser by hostname fails with server can't be found. ...
    (microsoft.public.windows.server.general)
  • Re: Exchange 5.5 error
    ... >>I performed an NSlookup from the exchange server on the ... telnet to that IP address from the exchange server. ... >indicative of a network issue. ...
    (microsoft.public.exchange.admin)
Quantcast