Re: New Windows 2003 Cluster - MSI īs are not applied

So i checked every setting(read permissions and so on)
and additional i´ve assigned a new msi to be sure, that
i´ve not make any failures.
But i still got the error, that i´ve to check the file source and source
permissions.
I need again your help.

Thank you.


"Max" <claudia_beilby@xxxxxxxx> schrieb im Newsbeitrag
news:eKkxUVHhGHA.4144@xxxxxxxxxxxxxxxxxxxxxxx
Thank you very much for your fast reply and great idea.
I will check it immediately and report you the state.

Kind regards
Max

"Ronni Pedersen" <rop@xxxxxxxxxxxxx> schrieb im Newsbeitrag
news:A7B71A83-3D57-4662-8397-2F1BF737FC89@xxxxxxxxxxxxxxxx
Hi Max,

If you deploy software to your computers you need to make sure that the
computer account has read access to the share.
That can be done by giving authenticated users read access to the share.
Domain Users is only for users... not computers.
This has to be done on both the share permisions and the ntfs permisions.

The error you get, is typicaly an error with access to the source path,
when installing to computers.

--
Best Regards

Ronni Pedersen
BetaID - 1080273
Windows Vista x64 Beta 2 (build 5384.4)


"Max" <claudia_beilby@xxxxxxxx> wrote in message
news:ezGT$U$gGHA.3756@xxxxxxxxxxxxxxxxxxxxxxx
Hello, we got 2 new windows 2003 file server, which replace the old 2000
Server, where the old Enterprise MSI´s lied.
The servers run as Cluster(and the Shares as cluster resource).

The old 2000 Servers ran as a Cluster too. Since then the MSI's moved on
the new file server , no more MSI are not applied .
And we get the following errors:

Type of event: Error source of event: Application management event
category:

No: event identification: 102
date: 10.05.2006
time: 17:24:42
user: NT-AUTORITAET\SYSTEM
computer: PC-XY
description: The installation of application Software_XY of the
guideline XY failed.
Error: The source of installation for this product is not available.
Guarantee that the source is present and you have access to it.

We tested access with going on the UCN Pathes(the unc from which are
configured in the gpo´s) with the windows explorer.

Need urgently your advice.
Thank you






.

Relevant Pages

  • Re: Document in use errors in Word
    ... I also used the OS's Disk Utility to Repair Disk Permissions but ... I copied the "Templates" folder from the MS Office 2004 ... I am the sys-admin at a K-12 school - we're running OSX 10.4.7 Server ... using Workgroup-Manager managed client computers ...
    (microsoft.public.mac.office.word)
  • Re: W2K3 and workgroup shares
    ... these guys don't logon to the server so ... > appropriate groups with the needed permissions to the share. ... The logon name and password must be the same on all computers or access can ... >> and local printers of others in the Engineer group. ...
    (microsoft.public.windows.server.security)
  • Re: Office 2008 and Network Home Folders
    ... All these computers are running Mac OS X 10.5.1. ... Our server is providing basic networking services (Gateway, Firewall, ... workstation via AFP (aka Network Home Folder). ... I have not read about similar issues, but the "permission" hint you got might not be that far away, as the access issues and can't open issues might be related to permissions. ...
    (microsoft.public.mac.office)
  • Re: Office 2008 and Network Home Folders
    ... All these computers are running Mac OS X 10.5.1. ... Our server is providing basic networking services (Gateway, Firewall, ... workstation via AFP (aka Network Home Folder). ... as the access issues and can't open issues might be related to permissions. ...
    (microsoft.public.mac.office)
  • Re: Group Policy Software Installation
    ... Simply add "Domain Computers". ... shared folder. ... EVERYBODY / Full Control share permissions and make it something like ... If I run the .msi normally I get the file security warning asking if I ...
    (microsoft.public.windows.server.active_directory)