RE: Dynamic Disk RAID LDM Repair

The easiest way to go about it is to conver the disk to basic disk and then
import the disks again. This should solve the issue. If this is not the
solution for your system please post the details about the number of disks
and their details for better understanding of the issue.

"Paul" wrote:

Hi,
I have had some trouble after a software raid failure..

A number of disks in the RAID array are marked as missing and it seems that
the LDM data structures are corrupt.

Can anyone recommend a recovery method/software to restore/correct the LDM
data structures.?

Thanks..





.

Relevant Pages

  • Re: Fedora and Software Raid
    ... > I whish to install FC 4 in a machine with to identical SCSI disks using ... > software RAID. ... > partitions on the disks. ... > But I have created this as a part of the SRAID. ...
    (comp.os.linux.misc)
  • Re: vinum vs. DPT smartcacheIV raid
    ... The CPU platform is more or less comparable. ... is now gvinum. ... Another thing to consider is if you use software RAID and your application ... >> some way of figuring out if one of the disks goes bad. ...
    (freebsd-questions)
  • Re: Recommended configuration options for pSeries 615
    ... > going to get 2 SCSI disks, and try to mirror them with software RAID. ... A motherboard upgrade is not required to install a 2nd processor. ...
    (comp.unix.aix)
  • howto software raid under FreeBSD?
    ... I want to create a software RAID 1 of two same disks. ... Coming from Linux I ... Is vinum the only way to create a software RAID 1 from ...
    (freebsd-questions)
  • RAID-5 failure
    ... I have a software raid 5 via mdtools. ... Must have had a short in the power cable going to two of the drives. ... matter what I can't get them to even spin. ... All the disks are in a large removable mount in the case, ...
    (comp.os.linux.hardware)
Loading