RE: Does Scandisk MSG indicate Hardware, Application, or OS Issue? - R

Hi,

Honestly, it is hard to find the root cause since the problem disappeared
already.

Based on my research, there are several reasons why the tab is missing,
such as third party program, permission on the registry key
HKLM\Software\Classes\Drive not being set properly etc. To troubleshoot the
problem, let's try the following suggestions:

(1). Safe Mode
Please reboot the server into Safe Mode to test the issue. Is the Security
tab still missing?

(2). Check the permission on HKLM\Software\Classes\Drive
Make sure appropriate permissions have been set. On my machine the entries
are Administrators, CREATOR OWNER, Power Users, SYSTEM and Users. If the no
user has been defined permission here, click Advanced and enable the option
"Inherit from parent the permission entries that apply to child objects??"

(3)Group Policy
===============
1. Click start -> Run, type "gpedit.msc" (without quotation mark) and then
click OK.
2. Locate the "Remove Security tab" policy under
User Configuration\Administrative Templates\Windows Components\Windows
Explorer
3. Double click this policy and set it to "Not Configured" or "Disabled"
4. Click Apply and click OK.
5. Restart computer and test the issue again.
6. If the issue persists, please try the next method.

Note: You may also find and delete the policy-related entry "NoSecurityTab"
from the following registry key:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explor
er]

(4)Corrupted Registry keys
===============
1. Click start -> Run, type "regsvr32 rshx32.dll" (without quotation mark)
and then click OK.
2. When you receive the following message, click OK:
DllRegisterServer in rshx32.dll succeeded.
3. Restart computer and then test the issue again.

Hope this helps.

Best regards,

Vincent Xu
Microsoft Online Partner Support

======================================================
Get Secure! - www.microsoft.com/security
======================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others
may learn and benefit from this issue.
======================================================
This posting is provided "AS IS" with no warranties,and confers no rights.
======================================================



--------------------
Thread-Topic: Does Scandisk MSG indicate Hardware, Application, or OS
Issue? - R
thread-index: Acbc6F/4ZgPYQrPQQPmLRellhI1vOg==
X-WBNR-Posting-Host: 65.161.113.5
From: =?Utf-8?B?QlN0b25lYnVybmVy?= <bstoneburner@xxxxxxxxxxxxxxxx>
Subject: Does Scandisk MSG indicate Hardware, Application, or OS Issue? -
R
Date: Wed, 20 Sep 2006 12:10:02 -0700
Lines: 75
Message-ID: <56CB1702-C81F-4869-B9DF-1F4FC5DF4E1E@xxxxxxxxxxxxx>
MIME-Version: 1.0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
X-Newsreader: Microsoft CDO for Windows 2000
Content-Class: urn:content-classes:message
Importance: normal
Priority: normal
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.1830
Newsgroups: microsoft.public.windows.file_system
Path: TK2MSFTNGXA01.phx.gbl
Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.file_system:9838
NNTP-Posting-Host: TK2MSFTNGXA01.phx.gbl 10.40.2.250
X-Tomcat-NG: microsoft.public.windows.file_system

Hello,
I had a problem that I am trying to determine the root cause of a
problem.

This is a Windows 2000 Std. Server SP 4 with all current patches.

I received a call indicating that a user was getting "access denied" when
trying to run a common network application.

When I tried to view security there was NO security tab. I then went to
the
root folder. The folder showed the correct rights. I decided to reset
permissions on all child objects and enable propagation of inheritable
permissions.

This generated numerous errors, including access denied. I then tried to
take ownership; getting similar results.

I felt there was something wrong with the file system. I enabled
scandisk
on the drive that houses this application and rebooted.

When scandisk was complete I have the following msg in the event log:

********************************
Event Type: Information
Event Source: Winlogon
Event Category: None
Event ID: 1001
Date: 9/15/2006
Time: 9:23:44 PM
User: N/A
Computer: ORION
Description:
Checking file system on D:
The type of the file system is NTFS.


A disk check has been scheduled.
Windows will now check the disk.
Cleaning up 332 unused index entries from index $SII of file 0x9.
Cleaning up 332 unused index entries from index $SDH of file 0x9.
Cleaning up 332 unused security descriptors.

29251624 KB total disk space.
13997976 KB in 90776 files.
20272 KB in 2071 indexes.
0 KB in bad sectors.
192688 KB in use by the system.
65536 KB occupied by the log file.
15040688 KB available on disk.

4096 bytes in each allocation unit.
7312906 total allocation units on disk.
3760172 allocation units available on disk.
********************************

This being complete I went back to the directory to check security on the
executable file. When I got there file was missing. I restored the exe
from
tape and tried to launch it. It now complained about a missing dll in
the
same directory. I restored that also. After this restore it complained
about missing another dll. To resolve the problem I ended up deleting
everything in the folder and restoring it from tape.

Now I am trying to determine the root cause for the problem.

The hard drive did not show any errors.
The raid card did not show any errors.
The bios did not show any errors.

I don't believe the problem to be hardware related...leaving either the
OS
or the application.

Can you provide me with any information in helping to determine the root
cause of this problem so that I can prevent it from reoccurring?

Brian



.

Relevant Pages

  • Re: Su command problem.
    ... > to the bash prompt. ... > Can anyone help me out as I may be missing something obvious. ... even root hasn't the permission to use a users x-session ...
    (alt.os.linux.suse)
  • Re: boot.ini disappears on restart or startup XP Pro
    ... In Item 2) you mentioned changing the permission of the file. ... Do this by choosing properties on the file and going to the 'Security' tab. ... seem to boot normally. ... No windows XP Pro install disk was received with the machine. ...
    (microsoft.public.windowsxp.general)
  • Re: tab control & user level security
    ... - The previous system had user A with permission to use form F, ... - The new system has a main form M with a tab control with form F as a ... going to tab page #3, because that page contains an object to which he ... disable the subform control on that page. ...
    (microsoft.public.access.forms)
  • Re: tab control & user level security
    ... - The previous system had user A with permission to use form F, ... - The new system has a main form M with a tab control with form F as a ... going to tab page #3, because that page contains an object to which he ... disable the subform control on that page. ...
    (microsoft.public.access.security)
  • Re: Of mice and men
    ... However, being able to change the permission of a file does depend on who owns the file, and what permissions they have given to others over that file. ... You may have installed something as "root" that enables the program to "execute" as root. ... A server is part of the OS, not an standard application run by a user. ... admin account....but this could also be done in Windows etc etc....people just view windows as a "home" OS and most "home" users just don't want to deal with the fact that there are more than one way to protect yourself. ...
    (comp.lang.cobol)