Re: Take forever to boot and display files in a folder

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance


Thanks Pegasus,

I think I already have done that - and am very sure that the network guy
didn't miss that too. We have thousands of machine here, and they all have
the same DCHP configuration, which is automatically search for the primary
DNS and secondary one.

/Release + /Renew do not do the trick neither.

I wonder if there is a problem with the indexing service, 'cause I searched
on the Net, and someone else has the same rebooting problem.

David.

"Pegasus (MVP)" wrote:

Ask your administrators to run the first command that a
trained administrator would run in such a case:

ipconfig /all

then to examine the value of the line starting with "DNS Servers".
It most likely points to the wrong machine.


"DQ" <DQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:36C61F16-3482-48B5-B3E7-E7D0765A778F@xxxxxxxxxxxxxxxx

It sounds strange that a guy has 6 Windows Servers under his desk and know
little about Windows DNS... :-)

But actually I am a developer who develop software that runs on Windows
Server. I do know something about Windows Server, but not as throughful
as
an Adminitrator does. Basically, all my 6 machines do not have DNS
installed. They are not DNS host machine.

However, I did give the trouble machine to a network administrator, and
they
could not figure out what is the problem after having the machine for a
few
days.

David.

"Pegasus (MVP)" wrote:

If you have six Win2003 servers under your control then
I would expect that you have an appreciation of TCP/IP
settings, Domain Name Servers etc. If not then I urge you
to ask your manager to send you to a few appropriate
training courses. The cost of training a system administrator
is much less than the cost of running an incorrectly
configured system.


"DQ" <DQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FD3553F8-C54A-472A-A2E1-C5A85B59626D@xxxxxxxxxxxxxxxx

Hi Pegasus.

Thanks for the quick reply. However, I have a total of 6 Windows 2003
server machines under my desk, and they all belong to one domain
controller,
but only one has this problem.

Is the settings that you mentioned on the DC, or is it on this
particular
machine? Where do I go to check for DNS settings?

Thanks.

David.

"Pegasus (MVP)" wrote:


"DQ" <DQ@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E8A939B2-6777-4218-ACF5-41C7B5CC0D63@xxxxxxxxxxxxxxxx

Hi all,

I have two problems, and I think they are related.

One of my Windows 2003 server machine, somehow taking forever to
boot.
Every time I reboot this machine, it will take about 3 - 5 hours.
There
is
one exception about this: if I physically disconnect the network
cable,
the
machine will reboot within less than a minute.

After it has completed the reboot, every things seem to work
normally
except
the Windows Explore: If I click on a folder that has only
sub-folders,
the
list of the sub-folder display almost immediately (normal).
However,
if
the
folder contains any file - Even with a folder that has only 2,3
files,
it
takes the Windows Explore forever (at least 15 seconds) to display
the
files
in the folder.

Thanks for any help in advance.

David.


Your problem is almost certainly caused by inappropriate DNS
settings.









.

Relevant Pages

  • Re: NT Domain to AD migration
    ... Windows 2000/XP always prefer Kerberos authentication, ... Server 2003 Active Directory service, ensure that you have designed a DNS ...
    (microsoft.public.windows.server.active_directory)
  • RE: Printing from Win9x clients stops
    ... Open Server Management. ... then right-click the name of the computer running Windows Small Business ... >From the client computer: ... The Select Network Component Type ...
    (microsoft.public.windows.server.sbs)
  • RE: Printing from Win9x clients stops
    ... The printers with 9x drivers on the server appeared automatically in the ... > then right-click the name of the computer running Windows Small Business ... > From the client computer: ... The Select Network Component Type ...
    (microsoft.public.windows.server.sbs)
  • Re: Secondary DNS and PIX
    ... Of course I updated them with the DNS ... WINDOWS SERVER 2003 FOR SMALL BUSINESS SERVER, ... Windows SBS 2003 SP1 is available. ...
    (microsoft.public.windows.server.sbs)
  • Re: Find AD hostname from Linux command line
    ... The Windows XP workstation gets an IP ... "Register this connection's addresses in DNS" turned ON. ... If I am on a Linux server and do "ping lancelot.ad.mydomain.com", ...
    (microsoft.public.win2000.dns)