Re: Remote Desktop won't accept a session

There is some troubleshooting information near the end of this page that may
be of help...

http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html

Beyond that there have been reports that NAV 2005 worm protection causes
similar issues. Also a few folks have reported the OneCare Live Beta causes
similar issues.

Of course this all presumes you calling the correct IP address.

--

Al Jarvi (MS-MVP Windows Networking)

Please post *ALL* questions and replies to the news group for the mutual
benefit of all of us...
The MS-MVP Program - http://mvp.support.microsoft.com
This posting is provided "AS IS" with no warranties, and confers no
rights...

<ljoffe@xxxxxxxxx> wrote in message
news:1132692415.930783.220860@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>I support several thousand machines on a very large LAN/WAN. I am able
> to connect to any machine I want via RD except for this one machine.
> It is running our corporate image just like every other machine. I can
> use this machine to control other machines via RD but I can't control
> this machine.
>
> I have both RD enabled and I have RD checked in the SP2 Firewall. It
> is not an issue with the routers or switches... it is all open for
> being able to do this.
>
> I have tried both the local Administrator account as well as domain
> accounts, none of them will allow an RD session to control the machine.
>
> The message I receive is:
>
> "The client could not connect to the remote computer.
>
> Remote connections might not be enabled or the computer might be too
> busy to accept new connections. It is also possible that network
> problems are preventing your connections.
>
> Please try connecting again later. If the problem continues to occur,
> contact your administrator.
> "
>
> I am the admin and there is nothing wrong. Short of reimaging this
> machine, what could it be?
>
> Thanks.
>
> Larry
>


.

Relevant Pages

  • Remote Desktop wont accept a session
    ... use this machine to control other machines via RD but I can't control ... I have tried both the local Administrator account as well as domain ... "The client could not connect to the remote computer. ... Remote connections might not be enabled or the computer might be too ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: New Record Update
    ... If the form is a subform, what is the name of the subform control on the ... > I have saved it and close the form and view my reports, ... >>MS Access MVP ... >>> combobox that allow me to choose an account. ...
    (microsoft.public.access.forms)
  • Re: How to do a Positive Control Check?
    ... I have a Nimbus 2C which has eight manual connections - six in the fuselage ... I do the control hookups in overlapping stages. ... With the ship well assembled and lubed, I do the classic positive control ... as someone more experienced put their hands on the flight surfaces. ...
    (rec.aviation.soaring)
  • Re: How to inject a common field into reports & forms
    ... means nothing and MsgId is made up. ... Putting the DLookup in the Control Source of the text box is really a good ... I am using a text box as opposed to a label, ... etc on your forms and reports in the situation where those objects will be ...
    (microsoft.public.access.formscoding)
  • Re: Wiki software for genealogy (long)
    ... store information ... ... it needs to allow connections to be made flexibly ... ... I like to have nice looking trees and printed reports as I don't get ... genealogical programs rather than the underlying database, ...
    (soc.genealogy.britain)