Re: Remote Desktop Office to Home PC


"Shenan Stanley" <newshelper@xxxxxxxxx> schrieb im Newsbeitrag
news:uc4AopwUFHA.3572@xxxxxxxxxxxxxxxxxxxxxxx
> Shenan Stanley wrote:
> "I am attempting to control my desktop at home remotely and have found
> that from anywhere other than work, this is possible. Is there some
> blocking you have in place to prevent Windows XP Remote Desktop from
> functioning properly to/from machines outside/inside our network here at
> work?"
>

HOW can I block "Remote Desktop Traffic"? What else would a firewall-admin
have to configure if it's not the port-blocking to prevent "remote desktop
traffic from functioning ?(port 8080 is obviously opened) Are there other
ports that RD needs to be opened?

Frank


.

Relevant Pages

  • Re: USB remote shutter release
    ... camera control. ... port instead of having to include additional hard- and firmware for the ... power out from the camera. ... Full remote control is a job for a laptop or ...
    (rec.photo.digital.slr-systems)
  • Re: Looking for remote access software
    ... > port forward 3389 from the router to the host you wish to access. ... Remote sessions are NOT the same thing as remote control. ... Try out VNC first. ...
    (comp.security.firewalls)
  • Re: Unable to Connect to Server/Client Desktop using RWW
    ... Port 4125 only needs to be forwarded to the external NIC IP address on your ... SBS server. ... When a remote user cannot connect, asre there any errors listed in the event ... logs of the SBS server or of the target LAN workstation? ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Remote Desktop
    ... I've gone to http://www.canyouseeme.org on the remote computer and it can ... Not sure if the modem is actually a router. ... As for port forwarding in my router, I've typed in 3389 for the ... Al Jarvi (MS-MVP Windows Networking) ...
    (microsoft.public.windowsxp.network_web)
  • Re: Deny rules...
    ... all times i could port scan and get to see port 80 (as that is the only ... No remote SysAdmin should be doing anything ... > If you are writing code to populate a Client set, ... >>I have few outside servers to connect from to my servers ...
    (microsoft.public.isa)