Re: Remote Desktop via VPN - black screen

Thanks Robert !!  I read the link and it's really possible that that will solve my problem BUT... In my MMC , there 's nothing to find about "terminal services".  Please tell me I can find it at the XP cd !  Otherwise I have to install this feature with the cd of Win Server 2003 (at work)... if that's legally?
 
"Robert L [MS-MVP]" <noreply@xxxxxxxxxxx> wrote in message news:O5L2sZFRFHA.576@xxxxxxxxxxxxxxxxxxxx...
it could be MTU issue. quoted from http://www.chicagotech.net/troubleshootingts.htm

Black screen while connecting to TS

Cause: MTU size may be too high.
Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
This posting is provided "AS IS" with no warranties.

Since a couple of weeks I have a problem with remoteDesktop via VPN.  A
while ago it just worked, but now it isn't anymore.

The situation:
pc with broadband at home
servers & desktops with working Remote Desktop at work (with working I mean,
it works IN the network and I have set up a couple of users/passwords to
login)
VNC viewer works (for the pc's where it is installed on - otherwise you can
say, just use THAT)
pinging to the host  computer also works
XP sp2 installed (hosts & guests)
at home : no domain
at work : domain

When I try to start up Remote desktop, and I click connect after filling in
the IP address (I already found out it does not work with pc names), I get a
black screen (in full screen mode) and the computer is blocked.  Then I get
a message : "the connection to the remote computer was broken. this may have
been caused by a network error.  Please try connecting to the remote
computer again".

Now I think it has something to do with portforwarding, but I shouldn't know
how to configure IF it is a portforwardingquestion.  My router is a Topcom
WBR 244

Thanks in advance !

Note: I also found a similar (the same) question on
http://www.eggheadcafe.com/ng/microsoft.public.windowsxp.work_remotely/post676863.asp
but there was no answer....



Relevant Pages

  • Re: Remote Desktop Service not behaving properly but no error
    ... Even after a reboot of the REMOTE computer, I try to connect to it, ... network connectivity problems. ... I've tried entering my password before connecting and waiting to enter ... It may have something to do with the screensaver timeout maybe because ...
    (microsoft.public.windowsxp.work_remotely)
  • Cant get to work remote desktop
    ... I got my network running like that. ... internet, it goes to my host PC on an ethernet adapter, then i got ANOTHER ... I open my windows firewall on both PC allowing remote desktop. ... so connecting to his PC from mine wont work since Home edition can't ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: RDP wont connect, no error msg
    ... connection to remote computer was broken caused by network error ... If the Remote Desktop screen comes up black and then you receive this error, you may need test and modify the MTU. ... How to Setup Windows, Network, VPN & Remote Access on ... I don't get any error message, RDP just blinks "Connecting to xxx.xxx.xxx.xxx" and then dissapears without any error message. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: VPN working...BUT
    ... remote computer cannot connect to a share on the main network. ... > I've encountered similar problems when connecting to VPN's ... >>From the remote office, I can VPN into my main network ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: Samsung i700
    ... able to use RD to connect from any remote PC to the servers. ... >> connect to via terminal Services and Remote Desktop. ... >> connecting to all of these servers from computers or laptops. ... > is it trouble with the vpn or the RD? ...
    (microsoft.public.pocketpc)