RE: Port forwarding & failure to get out to port 3389 w/ remote de

From: jason (jason_at_discussions.microsoft.com)
Date: 01/26/05 

Date: Wed, 26 Jan 2005 12:01:03 -0800

again a typo. i meant 192.168.1.102

"jason" wrote:

> Hi Jim,
> Yes, it was a type. I meant 3389. I don't think that is it either. the
> puclic address i see when i go to whatismyip is 24.44.xxx.xx and the computer
> I try to hit from the client side is 24.44.xxx.xx:3389. The router settings
> are set to forward all incoming traffic from port 3389 to 192.268.1.102. Am
> I missing something? Please advise. Thanks!
> Jason
>
> "Jim, MCSE" wrote:
>
> > First I assume you mean port 3389 and that was just a typo. I think I see
> > what the problem is. You have the public address actually on the desktop
> > itself and not the router. when you do a ipconfig/all you should see
> > 192.168.1.102 and when you go to whatismyip.com you should see the public
> > address that your router is going out. If you see both the same then your
> > desktop has the wrong settings on it and that is why the port fordaring isn't
> > working. Well, it is because it is forwarding that request to 192.168.1.102
> > but there is not a computer there to answer.
> >
> > Jim

Relevant Pages

  • Re: MV is the most published author of SAP
    ... > I don't give a rat's ass if I'm helping a situation with Marc or not. ... That's shocking, Jason. ... > of protecting Jim. ... I think Jim Moore's web site IS SLEAZY, ...
    (sci.anthropology.paleo)
  • Re: A critique of the BBC aquatic ape programme and the transcript.
    ... Jim has been all too civil to you. ... motive that attacks Jim. ... That's what's dispicable, Jason - his attempted ... > really couldn't get a much nicer person than Elaine Morgan. ...
    (sci.anthropology.paleo)
  • Re: statins dont reduce dementia risk
    ... >> Jason wrote: ... >>> We respect those subscribers that ask for advice or provide advice. ... Otherwise you are only getting someone else's opinion. ... >> bring it for Jim to look at. ...
    (sci.med.cardiology)
  • Re: macro to search for & select ranges to sum
    ... Jim Cone ... "Jason Head" ... Mark 28 ... What I want the macro to then do is to go through and differentiate each ...
    (microsoft.public.excel.programming)
  • macro to search for & select ranges to sum
    ... I have created a macro using VBA that takes raw data from an external excel ... Mark 28 ... Jim 13 ... Jason 48 ...
    (microsoft.public.excel.programming)
Loading