Re: Can't connect

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Greg (anonymous_at_discussions.microsoft.com)
Date: 03/10/04 

Date: Tue, 9 Mar 2004 16:24:02 -0800

I know what my current ip address is now on the server
computer. The DSL modem is not a router. I do have
firewall software, but port 3389 is open. I still can't
connect. I can't ping the server either.

Help.

Relevant Pages

  • Re: Cost of setting up a network
    ... A router capable of acting as a VPN endpoint for more than one user simultaneously with four Ethernet ports or a switch to suit. ... The rationale for using a server here is basically that the router doesn't need to be able to decide which PC to route the connection to. ... If you are using a router which supports it, you can set up a port-forwarding inbound rule which also _translates_ the port supplied to the receiving port. ... You can use several of these connections to different machines simultaneously. ...
    (uk.comp.homebuilt)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: changed IP address: cant receive email & need to make domain name match IP address
    ... Port Forwarding for 2Wire 1701HG ... SBS CDs, but it's always a good idea to keep them handy. ... As you are set up now, your SBS server is "bare to the Internet" (not ... need to buy at least another inexpensive router to put between the SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant connect to Mailserver
    ... domain's zone files on the dyndns server, ... I'm presuming it's a simple port forward from WAN to LAN on ... When I telnet to port 25 I should get a response from your ... Are the correct ports open in the router? ...
    (microsoft.public.windows.server.sbs)