Re: VPN issues
From: Evan (News_at_BullheadLaughlin.com)
Date: 02/02/04
- Next message: Ian C: "XP dial up logis scripts and secure remote"
- Previous message: Berni: "Re: How to change to offline files when connected to the LAN ?"
- In reply to: Priya Raghavan [MSFT]: "Re: VPN issues"
- Next in thread: Chetan Raghavendra [MSFT]: "Re: VPN issues"
- Reply: Chetan Raghavendra [MSFT]: "Re: VPN issues"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 2 Feb 2004 07:40:10 -0700
Priya,
Thank you for responding. I have tried both static and automatic settings on
the client connection setup. I am sure how to affect the server side IP. I
think that is always dynamic right? As I said, at one point I was able to
connect from home to work and that gave both the client and server and valid
private Ip. I do not recall if they were on the same subnet, but I think so.
When I try a static IP, I have tried one outside the dhcp range of the
server, both on the same subnet and not.
I was really feeling like this was a router issue, but I am able to telnet
to port 1723. I cannot ping it though. What a mess and I am completely stuck
at this point.
"Priya Raghavan [MSFT]" <priyadr@online.microsoft.com> wrote in message
news:O0f9NlX6DHA.2480@TK2MSFTNGP10.phx.gbl...
> Hi Evan,
>
> What IP address assignment method are you using? Is it from DHCP or from
> static pool ?
> Have you set "Idle disconnect" time anywhere?
>
> Thanks,
> Priya.
>
>
>
> "Evan" <news@bullheadlaughlin.com> wrote in message
> news:OMfEZzN6DHA.2264@tk2msftngp13.phx.gbl...
> > I am trying to connect vpn between two xp pro machines. I finally got it
> > connected successfully, but could not reach any shares by ip or
browsing.
> I
> > was getting a private server and clent ip uon connection. Suddenly I was
> not
> > able to even connect anymore. I got several errors about time out,
> agreeing
> > on a handshake, etc. I reset the host machine (work machine) but did not
> > make any other changes and still get stuck at verifying password. So
> > insterad of connecting and not being able to reach shares I can no
longer
> > connect. When I reverse the host and client (connect from work to home
> > instead of home to work) I can connect but the server address is a
> > 169.xxx.xxx.xxx number. I am out of ideas at this point. BTW, I am using
a
> > MS MN-100 base station on both systems with newest firmware.
> >
> >
>
>
- Next message: Ian C: "XP dial up logis scripts and secure remote"
- Previous message: Berni: "Re: How to change to offline files when connected to the LAN ?"
- In reply to: Priya Raghavan [MSFT]: "Re: VPN issues"
- Next in thread: Chetan Raghavendra [MSFT]: "Re: VPN issues"
- Reply: Chetan Raghavendra [MSFT]: "Re: VPN issues"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
