Re: Please Help
- From: "Cari \(MS-MVP\)" <Newsgroups1@xxxxxxxxxxxxxx>
- Date: Mon, 19 Sep 2005 21:58:11 -0700
Ask your local PC store to check your PSU.
--
Cari (MS-MVP)
Printing & Imaging
"simonbrock" <simonbrock.1vkvpt@xxxxxxxxxxxx> wrote in message
news:simonbrock.1vkvpt@xxxxxxxxxxxxxxx
>
> Well at the boot up it always fails/freezes as soon as the white bar at
> bottom of screen is full(does the same everytime) and when it comes to
> instalation it hangs once windows setup has copied the setup files and
> then you get the meesage "windows is starting setup". And i have
> removed everything apart from those listed below to check all
> hardware!
>
> Cari \(MS-MVP\) Wrote:
>> Do you remember at what point it failed? Any % value?
>>
>> Things a PC NEEDS to be able to POST....
>>
>> Motherboard, CPU (heatsink and fan please!!!), graphics card, monitor
>> and
>> RAM - oh and strangely enough, a PSU (power supply unit)
>>
>> Does it POST?
>>
>>
>> --
>> Cari (MS-MVP)
>> Printing & Imaging
>>
>>
>>
>> "simonbrock" simonbrock.1vg91r@xxxxxxxxxxxx wrote in message
>> news:simonbrock.1vg91r@xxxxxxxxxxxxxxxx
>>
>> Oh im a bit stumped at the moment, I Had a system running XP Home
>> Edition that worked perfectly fine until 3 weeks ago when it suddenly
>> stopped working, so much so that i was even unable to install windows
>> again because it froze at the same point everytime. So assuming that
>> a
>> piece of hardware had failed or sumfink i decided to take all my
>> hardware out and strat from scratch, i removed my dvd drive, floppy
>> drive, 1 stick of ram, sound card, network card, internal modem and
>> my
>> wireless network card to see if it was them causing a problem but
>> still
>> couldnt get windows to load or reinstall.
>> This has been eating away at me for too long now and the only options
>> that are left are, dodgy processor, motherboard fault, bios fault or
>> battery fault?? Any ideas and i would really appreciate them, thanks
>>
>>
>> --
>> simonbrock-
>
>
> --
> simonbrock
.
- References:
- Please Help
- From: simonbrock
- Please Help
- Prev by Date: Re: Restart during burn process on DVD_RW
- Next by Date: Re: XP / Movie Maker recognizes camcorder as NTSC, not PAL
- Previous by thread: Please Help
- Next by thread: Please Help
- Index(es):
Relevant Pages
|
|