Re: finding fail-safe default for XP laptop


Okay well to answer your first question - if this is when you load your
windows disk and try to repair yes? Well I have tried that and no programs
appeared to select a repair; only the 3 partitions. I have just attempted
again and it cannot setup on partition 3(FAT32), or the other large partition
because it says it is full or has incompatible programs. It suggests to
delete partition and it will create a partition for windows. What would be
the best option?

Also:-

I tried the reload default in bios settings; I am not sure if the computer
accepted the continue to load defaults as it seemed to bounce straight back
to cancel tab. Regardless of this I exited and saved changes. I tried to
reboot after getting back to the startup options screen; safe mode, safe mode
with command prompt, last known configuration, normal windows etc;, I
selected last known configuration, but it didnt work. The blue error screen
appeared.

The machine is a dell inspiron 640m.

thanks



"John John - MVP" wrote:

First off, did you try fixing this by using the Recovery Console
(Chkdsk)? That would be usual first thing to try.

I don't know if returning the laptop to fail safe settings will fix this
all I can tell you is to try it and find out. If all else failed its
worth a try. If your computer worked well for a good while odds are
that it won't fix anything, but you might have a lucky strike!

If you want more help with your BIOS options and settings you should
give us the make and model number of your computer and maybe someone
reading here will be familiar with your computer be able to offer more
help. The BIOS options are more or less the same for all computers but
unless we know more about your computer and the BIOS manufacturer we can
only offer general guidance.

John

meggst wrote:
thanks. another question if you can help - so where it says load defaults I
accept and contimue? Is it reasonably straight forward from there? Should
this do the trick to get the laptop working again?
"John John - MVP" wrote:

Yes.

John

meggst wrote:
In attempting to sort out umountable_boot_volume error, the faqs suggest to
reload fail-safe default settings. Would this be in the BIOS settings when
hitting F12?

.

Relevant Pages

  • Re: Update the BIOS
    ... Best to blow it all away and go a the clean install. ... Then later you'll be prompted to insert the manufacturer supplied Windows 2000 driver for your drive controller in drive "A") ... Use the ARROW keys to select the partitions Press D to delete an existing partition, If you press D to delete an existing partition, you must then press L to confirm that you want to delete the partition. ... mb or hardware manufacturer's web site for the latest bios and or Windows 2000 drivers for your devices. ...
    (microsoft.public.win2000.general)
  • Re: finding fail-safe default for XP laptop
    ... Description of the Windows XP Recovery Console for advanced users ... again and it cannot setup on partition 3, ... I tried the reload default in bios settings; I am not sure if the computer ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: XP tantrums... Memory ?
    ... lots of megabytes of MS updates ...all updates since SP3! ... RAM and voltage settings. ... version of BIOS but work with another. ... Hard booted a couple of times and eventually Windows loaded but, ...
    (microsoft.public.windowsxp.general)
  • Re: hard drive crash
    ... If I do a seperate partition for a program such as Acronis. ... Does the BIOS behave properly? ... then go into the BIOS later, are the settings you changed ... Clearing the CMOS ...
    (microsoft.public.windowsxp.hardware)
  • Re: XP tantrums... Memory ?
    ... RAM and voltage settings. ... version of BIOS but work with another. ... e.g. Windows check hd ... Since then I've tweaked bios to mostly manual settings based on RAM SPD ...
    (microsoft.public.windowsxp.general)
Loading