RE: OxOOOOOO7B Error after XP Pro install on SATA HD

Problem solved!

What the exact solution was I can not say, but I did the following things
and it finally worked:

* set my HD manually to the 150Mb/s speed with a jumper as my MB does not
support the higher 300 mB/s rate.

* the CDrom drive was hooked up to IDE 1. I do not know whether it was
critical, but I hooked it up to IDE 2 to prevent the cdrom being contrrolled
as a HD and causing a conflict (since IDE 1 is typically used for HD).

* I used Nlite to slipstream the drivers for my SATA controllers and this
finally provided the solution. Before I had a Floppy drive hooked up to
install the drivers, but although XP installation with F6 could identify the
drivers on the floppy, when it came to copying the files later in the install
process it gave errors. This was solved by slipstreaming the drivers on the
cdrom.

BTW I dumped the flop drive in the trash... it caused me more problems than
it solved ;-)

Thanks to Nlite.

Geert



"Geert" wrote:

Hi all,

I have a problem with installing XP Pro on my computer. I got a fresh WD
SATA HD (WD3200AAKS), hooked it up to the SATA1_SB port on the motherboard
(Gigabyte GA-K8NS Pro) and installed XP from CD. Installation works perfect
(without providing drives on floppy via the F6 option) but when it is
finished and it reboots, XP gives me the following "blue screen" message:

"A problem had detected and windows has been shut down to prevent damgae to
your computer. If this is the first time you've seen this Stop error screen,
restart your computer.

If this screen appears again, folow these steps:
Check for viruses on your computer. Remove any newly installed hard drives
or hard drive controllers. Check your hard drive to make sure it is properly
configured and terminated.
Run CHKDSK /F to check for hard drive curruption, and then restart your
computer.

Technical information:

*** STOP : OxOOOOOO7B (OxF898963C, OxC0000034, OxOOOOOOOO, 0x00000000)"

I disabled all RAID functions in the BIOS since I only have 1 HD and I don't
want to use RAID function.
So I searched the internet and it seemed to me it was a driver problem.

I downloaded the "NVIDIA nForce3 250 / Ultra Driver (Preinstall driver,
press F6 during Windows setup to read from floppy) O.S. : Windows XP" driver
from the Gigabyte website, put it on a flopppy and used it during install
with F6.

However, XP is telling me that the driver files are older than the ones on
the XP CD. But what the heck, just use them and continue. Again it installs
and I still get the blue screen.

So I got a manual from the Gigabyte site and it told me to use the driver
provided on the CDrom specifically for installing XP on the nForce3 250
chipset. So I did. I made the flop, fed it during XP install and it just
tells me that the files are older than the ones on the XP cdrom. But I force
to use the driver on the flop. When it continues to install it's telling me
that it can not copy the drivers files from the flop to the HD so it gives
you the option to skip them or quit installation. As you can guess, I am
still confronted with the same blue screen...

I am a bit out of options now. Any help?

* motherboard rev. 1.0 Gigabyte GA-K8NS Pro
* BIOS F6
* HD WD3200AAKS (WD Caviar Blue 320Gb SATA

Many thanks,

Geert
.

Relevant Pages

  • Re: old xp home computers
    ... > clean install ....i hope. ... utilities on the Internet for the type of BIOS you have. ... You also have hardware on your machine that requires drivers to interface ...
    (microsoft.public.windowsxp.security_admin)
  • Re: Reinstalling OS on D4550
    ... original factory install of Windows XP Home since March 2003. ... drivers for peripherals and new video/sound cards, ... and did all but the hard drives. ...
    (alt.sys.pc-clone.dell)
  • Re: Format Fdsik XP
    ... you can install it first thing. ... patch/install the drivers you prepared with earlier. ... network drivers and finally your video card drivers. ... of the hardware drivers from here - always go to the actual manufacturers ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Where are the hard disk drivers?
    ... What hardware items ... You probably need no drivers for this purpose. ... *where* to install to - instead, you'll get a message saying that there are ... AND the drivers are loaded for the PCI card even though these hard drives ...
    (microsoft.public.windowsxp.general)
  • Re: Problems using command format c:
    ... you can install it first thing. ... patch/install the drivers you prepared with earlier. ... network drivers and finally your video card drivers. ... of the hardware drivers from here - always go to the actual manufacturers ...
    (microsoft.public.windowsxp.help_and_support)
Loading