Re: large HD partition: who is right?

Dear friends

Thank you for all the inputs to this post.
The reason I'm keeping my P3 is I do not need something better, I just want
a larger HD storage space.

Thus, I'm keeping my existing 30GB HD with XP SP3. Will either add an
external or internal slave HD of 500GB, and use XP to partition the whole HD.

Regarding the "utility that attempts to access the disk using the BIOS's
real mode driver" that might cause file corruption. Could you explain more.
Do 3rd party tools like those disk defrag software for windows come under
this?

Thanks.

"dg1261" wrote:

Andy's explanation is exactly right. Real mode and protected mode require
different device drivers. The BIOS provides only a real mode driver. Once
XP-SP2 kicks into protected mode and replaces the device driver with its own
protected mode driver, the BIOS driver is out of the loop. The trick is
getting it to boot in the first place so it gets to that point. That's the
reason for keeping the OS partition entirely within the lower 137GB.

The "theoretical possibility of disk/file corruption" comes into play if you
use any utility that attempts to access the disk using the BIOS's real mode
driver, so you have to be careful what tools you use. Windows' native
functions won't do that, so as long as the upper part of the disk is only
accessed by Windows, you'll be okay.


"DL" <address@invalid> wrote in message
news:%23$mh$08DJHA.4904@xxxxxxxxxxxxxxxxxxxxxxx
Not according to a tech post I read, sometime ago, which stated there was
a theoretical posibility of disk/file corruption.

"Andy" <1@xxx> wrote in message
news:i8krb49ojvh67ptccla3e2n1msp8cvne2g@xxxxxxxxxx
The only time the BIOS comes into play is during the boot process. If
the BIOS has to access past the 137 GB point on the disk in order to
boot Windows XP, then booting will fail. Once Windows XP starts to
run, the CPU is switched to protected mode, and real mode BIOS code
can no longer be executed.

If the 500 GB is installed as a second non-bootable drive, then
Windows XP SP2 will be able to fully access the drive. If Windows XP
is installed on a small partition below the 137 GB point on the 500 GB
drive, Windows XP SP2 will be able to access the rest of the drive in
a second partition.






.

Relevant Pages

  • Re: hp Pavilion a1528x
    ... One thing I noticed is that whenever I start the hp provided "Windows ... PC-Doctor 5" tool and start the disk test, ... Linux-based diagnostics set up to boot with a bare minimum operating ... cache and compatibilty with Windows (IOW, the driver). ...
    (comp.sys.hp.hardware)
  • Re: Problems running Disk Scan
    ... [[Specifies whether Windows repairs file-system errors found during disk ... updates that are available on the Windows Update Web site, Upgrade Advisor ... The only Obvious problem I see is my Irez Icamm I have a Driver ...
    (microsoft.public.windowsxp.hardware)
  • Re: large HD partition: who is right?
    ... and then instantly nuke everything on the disk as the addressing wraps-around ... Windows' disk manager is intelligent enough that if it spots a ... external or internal slave HD of 500GB, and use XP to partition the whole HD. ... The BIOS provides only a real mode driver. ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: SCSI device mapping
    ... The job of exposing the newly created LD to Windows is done by the ... >>>device driver for the RAID controller. ... >> Also you should look in device manager to see if your logical disk has ... Mark Roddy DDK MVP ...
    (microsoft.public.development.device.drivers)
  • Re: Boot from SCSI drive: Driver?
    ... SYS file *for the driver itself*. ... If Windows can read the SATA or SCSI ... disk to GET the driver, why does Windows need the driver? ... Windows install routine reads the floppy and installs the drives. ...
    (microsoft.public.windowsxp.setup_deployment)